Only thing is... he is reporting that the use of the phone does not
disconnect service, just the ringer ringing disconnects it.
I'm not sure that the Ringer has anything to do with the 2.4Ghz spectrum
block. Or I should say, it would not use anymore spectrum ringing than
Talking. I'd guess
How would the handsets know to ring if not told by the base via 2.4? It is
probably making more noise while ringing than off hook.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 27, 2011 8:33 PM, Tom DeReggi wirelessn...@rapiddsl.net wrote:
No, actually the ringing is generated by the handset from the power in
its battery.
The command to ring is just a series of 1's and 0's sent from the base
unit to instruct the handset to ring.
On 12/27/2011 5:40 PM, Josh Luthman wrote:
How would the handsets know to ring if not told by the
What about from the copper pair to the handset?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Dec 27, 2011 at 8:52 PM, Gary Garrett ggarr...@nidaho.net wrote:
No, actually the ringing is generated by the handset from the power in
its
The ringing current from the Telco to the base unit is 120 cycles per
second AC.
It would be more like AC hum on a sound system.
I would bet the 2.4 phone system is using most if not all the band at
pretty low power.
Probably it is the wake up and setup for a call that is knocking out the
ISP
What I'm getting at is what initiates the ring. The copper pair hits
the base unit and then tells all the handsets in the house to ring.
I'm suggesting that this is 2.4 and what causes the SM's problem.
I've seen a ringing telephone cause a Dlink router to reboot 100% of
the time, it was easily
Agreed I think the call setup Is the key
Leon
Sent from my iPhone
On Dec 27, 2011, at 9:10 PM, Gary Garrett ggarr...@nidaho.net wrote:
The ringing current from the Telco to the base unit is 120 cycles per
second AC.
It would be more like AC hum on a sound system.
I would bet the 2.4
At 12/27/2011 09:10 PM, Gary Garrett wrote:
The ringing current from the Telco to the base unit is 120 cycles per
second AC.
It would be more like AC hum on a sound system.
Actually it's a 20 Hz near-square wave, 90 volts nominal. It is thus
much, much more powerful than the talk voltage, since
Yeah, I am sure there is a huge amount of data transferred in the wake
up command.
The handsets go into a sleep mode to give max battery life. The ring
command is probably just all 0's or all 1's like the old frame relay
connections use to tell the other end to loop back.
The actual talk data
Something about the ringing signal sent by the base to the handsets is
different. My dad had wireless headphones that received a horrible pop when the
cordless phone rang, but there was no interference when talking on the phone.
That same phone used to interfere with 2.4 wifi. We switched to
10 matches
Mail list logo
