Re: [WISPA] Any IgniteNet MetroLinq customers out there

[Faisal Imtiaz]

How long is the link ? 
If you are dead on with the scopes then you are off on the link :), they scopes 
are always off a bit... 
What firmware are you running ? 

Have you tried the alignment mode ? setup one side a TX and the other as RX and 
then reverse that 
What do you get when you do that... 

Aligning them can be an exercise in patience ! 

Feel free to call me, I will be more than happy to help. 

Regards. 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: "Chadwick Wachs" 
> To: "WISPA General List" 
> Sent: Wednesday, June 15, 2016 7:55:04 PM
> Subject: [WISPA] Any IgniteNet MetroLinq customers out there

> I have been trying for a couple days to get a new PTP60-35 60 GHz link up and
> running with no luck. Looking for some help / suggestions from anyone who has
> been successful getting links up. The 5 GHz link is working but 60 never 
> trains
> up. I bought the spotting scopes and each end is dead center. Good old
> fashioned up/down/left/right aiming methods do not seem to work either and
> IgniteNet is lacking in the support department.
> Anyone want to contact me off list if you have any suggestions on what worked
> for you?

> Thanks,
> Chad

> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Any IgniteNet MetroLinq customers out there

[Chadwick Wachs]

I have been trying for a couple days to get a new PTP60-35 60 GHz link up
and running with no luck. Looking for some help / suggestions from anyone
who has been successful getting links up. The 5 GHz link is working but 60
never trains up. I bought the spotting scopes and each end is dead center.
Good old fashioned up/down/left/right aiming methods do not seem to work
either and IgniteNet is lacking in the support department.

Anyone want to contact me off list if you have any suggestions on what
worked for you?

Thanks,
Chad
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] TOS, AUP, Etc.

[Jon Langeler]

Anyone willing to share one?

Thanks 

Jon Langeler
Michwave Technologies, Inc.

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless