Same here,
We have dozens of them out in the field and I have one that we use with no
issues.
The only issue I have seen at all was with a Kindle that would drop every
time the WPA2 key would refresh. So I am not sure if this was a kindle issue
or MT issue.
Chadd
_
From:
How cold are you talking?
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Matt Larsen - Lists
Sent: Saturday, February 05, 2011 12:42 PM
To: Mikrotik discussions; WISPA General List
Subject: [WISPA] Mikrotik RB411
I just wanted to take
Same here. Lightning takes out Ethernet sometimes but other than that they
have been solid for us.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Ryan Goldberg
Sent: Saturday, February 05, 2011 2:02 PM
To: WISPA General List
Cc: WISPA
Chuck,
I think I asked you this when we spoke on the phone a while back but do you
have Plat tied back into your network through radius? Or were you waiting
for V7 to come out?
_
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Chuck Hogg
Sent:
We haven't seen any declines through IP pay here but we use k-billing for
credit card and virtual terminal for our ACH recurring payments. It seems
kind of fishy that you can process them with VT but not your normal billing
software. On a side note Virtual terminal does have recurring billing set
As noisy as 2.4 is anymore I don't see how you could run both chains to
begin with. I never realized that you couldn't turn one off. It does seem
like a glaring issue to me.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Bingo!
_
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Friday, December 24, 2010 9:55 PM
To: 'WISPA General List'
Subject: Re: [WISPA] Wow- and how stimulus works
Actually, the reality is, all the cash gets spent at Wal-Mart
My first guess would be local noise on the CPE end. Second would be a
hardware issue.
_
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Scott Reed
Sent: Saturday, December 18, 2010 7:47 PM
To: WISPA General List
Subject: Re: [WISPA] Flaky connection
I am far from a Mikrotik guru but from what I know you would need to assign
private IP's to your network to be able to do this as a fail over or as load
balancing without BGP. I don't know of any DSL providers who will do BGP.
Chadd
-Original Message-
From: wireless-boun...@wispa.org
I used a few of these several years ago out of necessity back when I was
using buggy trango Link 10's that had a time based luckup problem. Well they
worked pretty good for a while but I noticed that they kept stealing the IP
address of the server that I was pinging for the keep alive ping and
Just curious but how will this work out for you guys in the end?
Is it going to just give you guys access to middle mile facilities or is it
going to give you access to wholesale fiber to the home?
The way I see it is in our area if the rural areas ever get FTH most of us
out here are done
We use IP pay as well.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Saturday, December 12, 2009 1:37 PM
To: 'WISPA General List'
Subject: Re: [WISPA] Credit Card Processors
Sounds like an overwhelming consensus
How is Nstreme working now days? I have not tried it on anything except PTP
for a few years now. The last time I tried it on an AP it was pretty rough.
Latency was very unstable and throughput wasn't all that great. I had read
that there was a new version in the test package a while back but never
] speaking of ARIN
They're close to 1/2 that now.
Rk
On 3/17/2009 8:22 PM, Chadd Thompson wrote:
Here are some quotes that I received a while back from ATT for a partial
DS3.
10mb: $4300
20mb: $4788
30mb: $5300
Here are some quotes that I received a while back from ATT for a partial
DS3.
10mb: $4300
20mb: $4788
30mb: $5300
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]on
Behalf Of Mike Hammett
Sent: Tuesday, March 17, 2009 1:33 PM
To: WISPA General List
of ARIN
Of course, they'll bill you 10 times that and never fix their billing
issues! -RickG
On Tue, Mar 17, 2009 at 11:22 PM, Chadd Thompson chad...@msn.com wrote:
Here are some quotes that I received a while back from ATT for a partial
DS3.
10mb: $4300
20mb: $4788
30mb: $5300
I have not heard anything from Chubb indicating this. Are they not taking
new customers or getting rid of existing ones also?
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]on
Behalf Of Forbes Mercy
Sent: Tuesday, February 17, 2009 3:43 PM
To: WISPA
Marlon,
Sound like you covered all your bases here but here is my .02 worth.
I have had issues like this in the past and it has always been related to
one of three things.
1. If it is a new hookup from dialup or SAT usually it is some sort of a
proxy issue, either proxy is enabled in
Doesn't paypal charge a pretty hefty transaction fee when accepting payments
with this type of account?
Thanks,
Chadd
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ralph
Sent: Tuesday, May 22, 2007 9:10 AM
To: 'WISPA General List'
Subject: RE:
for our industry and what the value is for me
to join. I am not saying WISPA is not doing or has not done anything for our
industry. I just need some help understanding.
Thanks,
Chadd Thompson
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo
questions about how the ORG operates on a day to day
basis, how decisions are made, where does the average joe fit in, etc etc.
Thanks,
Chadd Thompson
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org
crap like this comes up and makes me wonder if it is a good investment.
Talk of free listserver members being freeloaders and not supporting the org
is sure as hell not a good way to drive up membership.
Thanks,
Chadd Thompson
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe
You want to help the guy or poke him with a stick?
:O)
Chadd
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Dawn DiPietro
Sent: Tuesday, May 01, 2007 8:22 AM
To: WISPA General List
Subject: Re: [WISPA] Mikrotik Hotspot Setup
Ty,
I assume
I kind of thought the same thing, but thought he may be poking fun
at him or something.
I have been planning on joining WISPA this year once I can scrape up
the $$ to do it but with the recent bashing of certified/non-certified
solutions I am not sure it is where I want to spend
Sounds about right, the other thing with higher noise levels is that you
will have packet loss. You can still have good throughput but you will have
packet loss.
Chadd
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Smith, Rick
Sent: Friday, April
requires the packets to be retransmitted which takes
up additional timeslots which leads to a lowering of the overall
throughput capacity because some of the throughput-carrying timeslots
are used up by the retransmissions and therefore aren't available to
transport throughput ...
Chadd Thompson
My advise is to stay away from it if you can. The noise in most areas is
horrible, and I have not seen any gear yet that can deal with it. I have
some customers running on it still but any chance I get I take users off 900
and put them on 2.4 or 5.8. The equipment is expensive the antennas are
Im experience it depends on what you consider works. If you consider being
able to transfer a decent amount of data with 5% packet loss working then
yeah it works, if you have anything that is latency sensitive then no it
doesn't work well in noisy environments. Our area is noisy on both H and V
Scriv,
I use the tape-tape-tape method. First I wrap the connection very
tight with a high quality electrical tape like 3M super88, then I wrap a
layer of self sealing rubber tape 3M brand also, then a final layer of 3M
super88. You need to make sure your wraps are tight. Also make sure
Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Chadd Thompson
Sent: Friday, March 16, 2007 9:45 AM
To: 'WISPA General List'
Subject: RE: [WISPA] Moisture Ingress
Scriv,
I use the tape-tape-tape method. First I wrap the connection very
tight with a high
, it's
max
eirp is 4 watts. 36dB
laters,
marlon
- Original Message -
From: Chadd Thompson [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, February 07, 2007 10:00 PM
Subject: RE: [WISPA] TV white spaces
Sorry,
The signal was in the -70's
Yes 36 dBm.
Thanks,
Chadd
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Dylan Oliver
Sent: Wednesday, February 07, 2007 12:00 PM
To: WISPA General List
Subject: Re: [WISPA] TV white spaces
Am I missing something, or is 36 dBm EIRP our limit?
Sorry,
The signal was in the -70's not right at -70. It was mid to upper -70's from
what I figured up they were putting out around 43dBm EIRP. I could also see
the SSID of the AP so I know what town it was located in and it was/is a
sectorized POP that would be around 30dBm radio input to a
In our area So IL/metro St.Louis there are some large guys who are in no
way shape or form legal, over power limits and the whole 9 yards. I can see
other WISP Omni POP's with signal levels in the -70's from over 20 miles
away using a 9dBi on my end, figure up what the EIRP on that is. The one in
Almost makes you want to close the doors on the rural market and let the
FCC/Gov fund/force ATT or whoever to provide service in these underserved
areas.
It is going to get to the point where we are only going to be able to
compete in areas where DSL/Cable is not available. I am not sure about
the
number of MAC addresses seen by the Trangos. This fixed the problem.
Todd Barber
Skylink Broadband Internet
[EMAIL PROTECTED]
970-454-9499
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Chadd Thompson
Sent: Tuesday, December 19, 2006 4:00 PM
Sorry to cross post this guys but I am looking for suggestions and wasn't
sure if everyone is on both lists.
I have been having an intermittent problem the last few days. A few of my
AP's and CPE's will stop responding. These are a mixture of brands, Trango,
MT, Brilan, they are on different
] On
Behalf Of Chadd Thompson
Sent: Tuesday, December 19, 2006 4:00 PM
To: 'WISPA General List'
Subject: [WISPA] Strange network issues crosspost
Sorry to cross post this guys but I am looking for suggestions and wasn't
sure if everyone is on both lists.
I have been having an intermittent
Mac,
Is this a trango command? I don't remember there being an arp command in
the link10's
Thanks,
Chadd
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mac Dearman
Sent: Tuesday, December 19, 2006 9:09 PM
To: 'WISPA General List'
Subject:
Does anyone know if it is possible if you are hosting multiple domains on a
single Sendmail server if you can restrict what local users can send and
receive mail to a particular domain instead of everyone on the box being
able to send and receive from all the domains being hosted?
For example,
Won't that still allow the user to receive mail for every domain on the
server unless you go in for every user and specifically deny that particular
address?
Say you wanted bob to only be able to receive mail on yoyo.com and not
yingyang.com or jacks.com. I would have to put entries in the
Yeah more power will fix it..
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer
Sent: Thursday, August 17, 2006
11:51 AM
To: [EMAIL PROTECTED]; WISPA
General List
Subject: Re: [WISPA] 900 mhz AMS
system
Get them a bigger antenna at that
Anyone know of any VOIP consultants?
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.1/421 - Release Date: 8/16/2006
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
Title: Tower contract / Revenue Share / Discounted Services
The problem with this in our area is that
generally they want more per month for rental that we would generate for subs
off a tower. They think we are similar to cell companies and have deep pockets,
not realizing that we may only
IMO they need to start giving money to the end users to pay for hookup and
installation. Stop paying to expand WISP's networks and give the money where
it is needed, if you want a bigger network pay for it out of your own
pocket. In IL I doubt you could drive from Chicago to St.Louis and not be
FYI the moto price is for the light
version of client, Limited to 512K throughput.
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Bushard, Jr
Sent: Monday, February 20, 2006 9:10
AM
To: 'WISPA General List'
Subject: RE: [WISPA] 900MHz
Systems
What
Matt,
Thanks for the information. Have you used this sort of setup in an
outdoor environment? If so did you have to control the temp for it to work
ok?
Thanks,
Chadd
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Matt Larsen - Lists
Sent:
From what I have read they are not fully upgradeable because there are some
hardware differences between the light and the normal units.
I also remember reading that you have to have the advantage AP to use the
light versions of SU's.
Chadd
-Original Message-
From: [EMAIL PROTECTED]
Curious if anyone here has co-located on an FM tower? If so care to share
your experiences?
Thanks,
Chadd
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.22/238 - Release Date: 1/23/2006
--
WISPA Wireless List:
We have a lot of fence rows in this area so 900 is going to be a necessary
evil like it or not. I tried using 5.7 Trango for a few installs early on
and just couldn't get any range out of it in this area, and the noise floor
is fairly high in 5.x around here.
It seems like more and more people
So who is going to beta test these bad boys? I already took my turn with the
link 10's and T900's
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Larry A Weidig
Sent: Wednesday, January 18, 2006 1:13 PM
To: WISPA General List
Subject: RE: [WISPA] TRANGO!!
I am probably far more cynical than most but I really hope that Trango has
made a turn around as a company with the latest round of changes.
I tend to remember the bad things more than the good.
WARNING this is a list of the BAD things!! Good things are at the bottom...
I remember purchasing
Happens every day on our network. I get about 500 to 1000 hits a day on our
servers/router logs of ppl port scanning and or running log in scripts
trying to crack a username/pass. I have only turned a few in to thier ISP's
abuse address and never heard anything from it except for a canned message
Where are you getting those prices and in
what quantities?
Thanks,
Chadd
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Travis Johnson
Sent: Tuesday, December 13, 2005
12:47 PM
To: [EMAIL PROTECTED]; WISPA
General List
Subject: Re: [WISPA] Canopy buying
group
54 matches
Mail list logo