We are doing close to 70meg TCP with MTs. All depends on the links..
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services
First, I would like to thank everyone for the support they have shown me
as well as the great relationships I have made as a board and committee
member with WISPA. I am sure I can continue to serve the WISP community
with WISPA, and I do look forward to doing so! There are some
questions
Just wished to tell everyone that I will be on-line for the next hour or
two, maybe more in the WISPA chat page.Anyone wish to join me?
http://www.wispa.org/wispa-chat/
I also would like to make sure I tell everyone that I will be on-line as
well tomorrow around 9:30 AM CST as well if
Also note that 333s are going by the wayside too. The 400 series is
really the main workhorse right now.
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies,
Drop in a ATA and plug it into a cheap cordless phone :)
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services
WISPA Vendor
.
I would not think it should matter if anything is connected. The
interface is active, it has an address. That address range should be
propagated by OSPF. I will be at the site tomorrow. I will connect to
the VirtualAP and see if that matters.
Dennis Burgess - LinkTechs.net wrote
A virtual AP is another interface, so unless its bridged with something
else, it will have to have an IP to communicate!
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link
it in a bridge and addressing the bridge to see what
happens.
Dennis Burgess - LinkTechs.net wrote:
A virtual AP is another interface, so unless its bridged with something
else, it will have to have an IP to communicate!
* ---
Dennis
Nope, can do dynamic in 4 :)
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services
WISPA Vendor Member*
*Office*:
Agreed. MT is a high quality product, and looks nice in a rack.
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services
Can do everything on this, but the cost. Looks like around $515 in
single unit pricing. Shoot me a call if you have questions.
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
What I quoted :)
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services
WISPA Vendor Member*
*Office*: 314-735-0270 *Website*:
We have some dual-pol integrated units.
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services
WISPA Vendor Member*
*Office*:
Yep..
Dual r52N cards in a Dual-Pol Arc Enclosure. We can build, test and
even put a base configuration on it for you if you wish. Just plug them
in and aim them at each other :)
* ---
Dennis Burgess, CCNA, A+, Mikrotik Certified
Routed is the way to go. Think of this, the internet is routed, why
should you not be..
I support hundreds of networks running RouterOS most with dynamic
routing, with very little issues.
* ---
Dennis Burgess, CCNA, A+, Mikrotik
You can use Radius and MAC authencation to deliver up and down bw at the
AP/CPE ... Need to have a MT client though.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik
...@wispa.org] On
Behalf Of Josh Luthman
Sent: Monday, January 19, 2009 5:35 PM
To: dmburg...@linktechs.net; WISPA General List
Subject: Re: [WISPA] Really Simple Mikrotik shaping?
Or radius and a pppoe client.
On 1/19/09, Dennis Burgess - Linktechs.net dmburg...@linktechs.net
wrote:
You
Burgess - Linktechs.net dmburg...@linktechs.net
wrote:
You can use Radius and MAC authencation to deliver up and down bw at
the
AP/CPE ... Need to have a MT client though.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board
Speaking of mail servers, anyone have any luck getting imap push
technology to work?
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member
Link Technologies, Inc -- Mikrotik WISP Support Services
WISPA.ORG Vender Member*
314-735-0270
If you wish all of your mail to come from that.
We typically just restrict outbound SMTP to either pop/imap first, or an
open list.
But of course, they need to have their own IP to not poison yours.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA
We have done some MT 3.75 links :) Sorry no ligowave.
Simply put its better than 5 gig if there is lots of interference, but
no better than 2.4 when it comes to LoS.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member
Link Technologies, Inc
that way?
Jay
On Jan 9, 2009, at 9:29 AM, Dennis Burgess - Linktechs.net wrote:
I have a number of customers that switched from them because of this
reason. Just no one there.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member
second this!! :) So far seeing good results as well with the new R5Hs
and N-Stream too ;)
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services*
Like I said, if you just need data, then MT can't be beat on this. lets
see, 30-40 meg throughput in most cases, if he gets good signals, super
low latency, usually 1-2ms if that, warrantied product, and FCC
certification ;)
Heck, just the boxes with POEs, ethernet surge and new 6gig Coax
for NStreme.
But I bet Dennis, would have all the answers of how to optimize usage of
Nstreme.
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: Dennis Burgess - Linktechs.net dmburg...@linktechs.net
To: WISPA General List wireless
/onlinetraining.asp/*
David E. Smith wrote:
Dennis Burgess - Linktechs.net wrote:
Yes you have to have a good processor, it does compression. I also
believe it does MPPP as well, and larger frame sizes as well to get
higher speeds. Hence, processor usage is key.
When I was testing
were being overloaded. That drives them bananas...
jack
David E. Smith wrote:
Dennis Burgess - Linktechs.net wrote:
Yes you have to have a good processor, it does compression. I also
believe it does MPPP as well, and larger frame sizes as well to get
higher speeds. Hence, processor
We had a site with a 1000 watt AM Hotstick about 100 feet from another
tower. We ran the cable (non-shielded outdoor rated) and crimped the
end at the top of the tower. The installer all of a sudden, felt a
burning sensation on his thumb with that wonderful smell of burning
skin. Guess
Not to say thats not right. The whole point of the Darwin awards was
that the people who died have died in the most stupidest way, that they
did the entire human population a favor by eliminating themselves from
the gene pool. There is a movie even on it.Like the guy who
strapped a Jato
Something else you can do is use a printing co. There should be one
local to you. They should be able to print, stuff and qualify for
bulk rates.
Something else we did, we had 220 people in my subdivision, it was 92
bucks for postage, plus envelopes, plus printing, plus paper etc.
?
__
Jerry Richardson
airCloud Communications
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
On
Behalf Of Dennis Burgess - Linktechs.net
Sent: Wednesday, December 31, 2008 11:39 AM
To: WISPA General
certificed cards to run at 5.2/5.4 with MT?
__
Jerry Richardson
airCloud Communications
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Dennis Burgess - Linktechs.net
Sent: Wednesday, December 31, 2008 11
Mikrotik! :)
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services*
*Office*: 314-735-0270 *Website*: http://www.linktechs.net
http://www.linktechs.net/
Did you setup the port you are on, to the right VLAN, or configure your
NIC on your laptop for that VLAN?
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support
http://www.linktechs.net/
*/ Link Technologies, Inc is offering LIVE Mikrotik On-Line Training
http://www.linktechs.net/onlinetraining.asp/*
Marlon K. Schafer wrote:
Thanks Dennis! You are my hero!
marlon
- Original Message -
From: Dennis Burgess - LinkTechs.net dmburg
looks like it fell off!
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc is offering LIVE Mikrotik On-Line
too bad its not grounding the unit.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc is offering LIVE
--
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc is offering LIVE Mikrotik On-Line Training
Might be a difference of reading the RFCs. I.e. the RFCs are not clear
enough as two people may be able to form their own interpretation too.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link
Create a tunnel back to your NOC. done!
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services*
*Office*: 314-735-0270 *Website*:
I.e. you want bandwidth out of st. louis?
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services*
*Office*: 314-735-0270 *Website*:
I built some machines, AMD 5000+ Black Editions, 4 gig RAM, Vista, 500
gig SATAs, DVD drives, nice cases, HD 3500 512meg PCI-E Video Carts and
DUAL DVI 22inch LCDs. So far, I don't wait for them! Was inexpensive
for the box too.
--
* Dennis Burgess, CCNA, A+,
Is there a central resource for this type of information?
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services*
*Office*: 314-735-0270 *Website*:
Yes. I am up to 25 gig this month. Course me and my wife have been
watching older TV shows over the weekend. ;)
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP
are condemned to reinvent it, poorly.
--- Henry Spencer
On Mon, Nov 24, 2008 at 9:56 AM, Dennis Burgess - LinkTechs.net
[EMAIL PROTECTED] wrote:
Yes. I am up to 25 gig this month. Course me and my wife have been
watching older TV shows over the weekend
Simple as this...
Even if you can supply this bandwidth..
1. Avg Customer usage goes up.
2. Over subscription rate goes down.
3. Network costs go up to meet increased demand
4. Per Sub costs go up due to the higher usage
5. Profit per sub goes down.
Increase back-end costs but no increase
The local Gas Co here has budget billing The bill changes ever 4
months. During the winter its low, and the summer its way high, why.
Winter we use it to heat with, normally I would have 300-400 bills, for
a few months, but the summer we only use it for cooking, so it would be
30-40 bucks!
Yep. And I would agree there. I also think, WISPs, and even cable cos
have the issue that the technology will limit their ability to take this
increase rapidly.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org
By the time you are done, with antenna and such, it usually is not under
50 bucks. Not to mention the quality of the product. Thats always
something to look at. We have uninstalled other types of radios, and
replaced them with MT CPEs just cause they work!
It costs more to go back and have
I do prefer the 433AHs, however if you are only putting a single radio
card on it, then the 411A vs 433 is wash. Same processor, same RAM as
the 433. If you are not doing much with it, it should work fine. Going
to multiple radios per board, 433AH, is the way to go though.
looked like fun! :)
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org http://www.wispa.org/
Link Technologies, Inc -- Mikrotik WISP Support Services*
*Office*: 314-735-0270 *Website*: http://www.linktechs.net
Change the burst time to 60s/60s and you will be CLOSE to 30 second
burst.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link
There is RSTP in current revisions of MT. Is there a reason its not a
routed backbone though? Failover etc works so much better.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
Please do not Advertise on the list! This is not permitted.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc
Just a FYI, I got this from Mikrotik.. I wanted to make sure I sent it
out to everyone..
The tranzeo timestamp issues comes from tranzeo implementing a timestamp
check that is not included in the 802.11 standard for ap to client
communications.
The timestamp check is included in the
I like the lonely plants scattered about.
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc is offering LIVE
Believe it is.. But its not just for Tranzeo though..
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc is
I strongly urge everyone to send me off-list at [EMAIL PROTECTED],
any suppouts videos, screen shots of this issue. I have an open case
with MT. If you send it over, I will continue to gather information
etc, and continue to work with MT on this issue.
--
* Dennis
Mark,
We are NOT far at all, in House Springs, just south of St. Louis. Rolla
is just about 1 1/2 hours from us!
Give Jim a call on his cell at 314-565-6863. We are a MT distributor
and can get you whatever you need!
--
* Dennis Burgess, CCNA, A+, Mikrotik
it is'ent like its hard to find other companies selling this. Amazon is
selling it too, as well as compusa. .. The issue is that its not over
powering the band? Assuming its a 500mw amp thats basically 27 db, so
if they have a 7 dbi omni on it, thats 34 dbi, under the limit
The only issue is
Davis wrote:
Let's not start the Certified 'Antenna Systems' thing again.
Please!
Dennis Burgess - Linktechs.net wrote:
it is'ent like its hard to find other companies selling this. Amazon is
selling it too, as well as compusa. .. The issue is that its not over
powering the band
Trends IWSS Does this, full reporting, plus gives you anti-virus and
Anti-SPAM protection..
YOu an load that up on a server, or purchase their hardware box.
--
Dennis Burgess
Mikrotik Certified Consultant
Link Technologies, Inc
http://www.linktechs.net
Travis
Southpark Crude!!! NEVER!! ahahahhaa..
Mark Nash wrote:
I watch South Park religiously...
That said...if you watch the full episode...
fair warning...part of this episode is extremely crude
Mark Nash
UnwiredWest
78 Centennial Loop
Suite E
Eugene, OR 97401
541-998-
And what do you use to control that bandwidth?
Chuck McCown wrote:
We sell 10.2 Mbps burst service. And most of them actually get that speed.
If they start streaming or downloading a large file, we throttle them down.
Most are at 768.
When the stream or download stops, they go back to wide
http://lessig.org/blog/2008/04/testifying_fcc_stanford.html
Interesting presentation. On Net Neutrality.
WISPA Wants You! Join today!
http://signup.wispa.org/
Nope, if your vendors have them, thats all they are getting.
Dennis Burgess
Mikrotik Certified Consultant / Trainer
www.linktechs.net
WISP/ISP Support Solutions
Home of the PoweRouter 732!
Blair Davis wrote:
I was told that while the 532 was EOL, the 532A would remain available
for a
Good idea! :)
Dennis Burgess
Mikrotik Certified Consultant / Trainer
www.linktechs.net
WISP/ISP Support Solutions
Home of the PoweRouter 732!
Blair Davis wrote:
2 reasons
I've made it a point to make all my tower equipment use the same power
to eliminate the need to keep different
This is a major issue and all you can do is plan for it. The stepdown
from 48 to 24 or 18 is much less of a worry vs AC/DC - DC/AC
conversion. The loss should be minimal, and transformers like this,
should not fail often. They are simple devices and are relitivly cheap
and replaceable.
I
I have a number of hotspot Mikrotiks up 200+ days.. I have seen some
over 400 days too, usually we reboot them just to update software
though. lol
Dennis Burgess
Mikrotik Certified Consultant / Trainer
www.linktechs.net
WISP/ISP Support Solutions
Home of the PoweRouter 732!
Eric Rogers
MT does BGP and Bandwitdh shaping. Much simpler to use compaired to
star, at least you get a graphic interface.N-Stream does the same thing.
Dennis Burgess
Mikrotik Certified Consultant
www.linktechs.net
George Rogato wrote:
Ok
What about Butch?
Butch can maybe better define the
was wondering about compatibilty with
other third party BGP implementations used by upstreams using
different platforms.
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message - From: Dennis Burgess - LinkTechs.net
[EMAIL PROTECTED]
To: WISPA
You can also contact Jim Patient at Jeffco SOHO, at 314-565-6863 He
has some great boxes.
Dennis Burgess
Mikrotik Certified Consultant
www.linktechs.net
Jenco Wireless wrote:
Hi Mac. If the RB-333 is about the same size as the RB-600, I use the 14 x
12. It's a little tight - I vent
The LP or Natural Gas is the way to go. Normally, 100 lbs tanks are simple
and cheap, here around 60 bucks delivered. It will run a generate for a
good number of hours. A customer put in a 15k auto gen found it on e-bay
delivered for 2500 bucks! Ran his NOC twice for 5-6 days each. Has a 250
We did a 18 mile shot, dual n-stream with pre-release v3 dual pol antennas,
and got 35meg with -70 or so.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mac Dearman
Sent: Thursday, February 07, 2008 5:09 PM
To: 'WISPA General List'
Subject: Re:
We have tested 2600 PPPoE sessions with a PoweRouter 732. This with ONE
core on only.. Plus, it includes 7 GigE interfaces. Rackmount etc..
Dennis
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of rabbtux rabbtux
Sent: Thursday, February 07, 2008 6:22
This is an area that MT has shown considerable interest in as well as have
several GOOD hardware products out there. The 1000 is going to be a
contender. Not as expandable, but with the price vs performance, don't
think you can go wrong. A non MT based product is the PoweRouter 732.
There are
We started to do this. Ended up stopping as everyone wanted to be that 30
foot higher, but when you built a 60 foot attached tower or 100 foot guyed,
it got expensive and then they did'ent want it.
Better purchase, bucket truck.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
I was just setting up some mailing lists of my own! lol. I'm sure all
will go well!
Dennis Burgess
Mikrotik Certified Consultant
www.linktechs.net
David E. Smith wrote:
I'm in the middle of moving the WISPA mailing lists to a new (and bigger!)
server, and want to be sure I haven't broken
I have known several people to use these and some have seen bandwidth
savings. MS updates is one of them. Something to note, is that as
George says, it can go both ways. The key is to find out where people
are going (YouTube) and ensuring that they will help accelerate that.
George Rogato
Thanks for the vote there.. I do have Enterprise-Grade 1U RackMount
Mikoritks. www.mikrotikrouter.com
Dennis
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Wednesday, October 03, 2007 7:53 AM
To: WISPA General List; [EMAIL
Yep. I will be there
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Gino Villarini
Sent: Saturday, September 22, 2007 1:45 PM
To: WISPA General List; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: [WISPA] Wimax World , anyone going?
Im going to Chicago
81 matches
Mail list logo
