This message was originally HTML formatted. View in a HTML capable client to see the original version.\r\n\r\nI would assume it is ARQ? check the su's to see if arq is on/off in telnet and/or on/off on the ap.
---- Original Message ---- From: "Vince West" vi...@shelbybb.com Sent: 6/26/2013 4:30:28 PM To: "WISPA General List" wireless@wispa.org Subject: [WISPA] Trango 900 problems What is the [RF Tx Retry at AP] [RF Tx Retry Maxed Out at AP]?? The SU could be hitting the AP just fine, but if the AP isn't hitting the SU that would cause some issues. For those customers that you are having issues with, try doing su linktest and seeing what their error rate is. Also things to consider are noise floor and any potential interference. Are these customers all located in the same area On Wed, Jun 26, 2013 at 1:05 PM, Terry White twh...@ueci.coop wrote: we are using the legacy 900 mhz and having frequent disconnects on a few customers. the only thing i find on these customers is when looking in the ap i find the following line at the bottom of the su info command. all the subs that are having problems have a 0 at the maxed out tx retry. [RF Tx Retry at SU] 0 [RF Tx Retry Maxed Out at SU] 0 Terry White United Services (800) 585 - 6454 twh...@ueci.coop "Your Local Satellite Professionals" _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless