Re: [WISPA] Baicells - who's deployed it?

2016-06-27 Thread D. Ryan Spott
Specifics? ryan -- D. Ryan Spott | NGC457, llc broadband | telco | colo | communities PO Box 1734 Sultan, WA 98294 425-939-0047 > On Jun 24, 2016, at 09:35, Judd Dare <judd.d...@gmail.com> wrote: > > Azure is far from reliable. > >> On Jun 19, 2016 11:03

Re: [WISPA] Small NEMA Enclosures

2014-04-30 Thread D. Ryan Spott
://lists.wispa.org/mailman/listinfo/wireless -- D. Ryan Spott | Iron Goat Networks, llc broadband | telco | colo | community PO Box 1232 / 603 W. Stevens Sultan, WA 98284 360-799-0552 | gtalk: rsp...@irongoat.net ___ Wireless mailing list Wireless@wispa.org http

Re: [WISPA] OT Email Receipt

2014-04-02 Thread D. Ryan Spott
there is but they seem to think they read something a while back thanks heith ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- D. Ryan Spott | Iron Goat Networks, llc broadband | telco | colo | community PO Box 1232 / 603

Re: [WISPA] Bandwidth/Performance Test

2014-03-20 Thread D. Ryan Spott
I liked the speedtests that are based off of fancy speedtest but I did not like the fact that I could not see historical speedtest data. I edited it to collect data on any customer running the speedtest. I have a few customers that will call and freak out over slow speedtests until I looked

Re: [WISPA] Are we being muscled out of the 5265 - 5700 frequencies?

2014-02-10 Thread D. Ryan Spott
I would be happy to drive out there to give you a hand Arthur. ryan On 2/10/14 9:19 AM, Marlon Schafer (509.982.2181) wrote: I'm with Forrest here. Back in the back ol' days of everyone running amps (we had to back then in many cases) some vendors loved to sell more power. More power means

Re: [WISPA] WAN Optimization products for Medical Imaging / Radiology ?

2014-01-24 Thread D. Ryan Spott
Take a look at Riverbed steelhead and their software/appliances. They are very open to loaning you equipment for weeks on end for testing. The setup is so simple it is not even funny. http://www.riverbed.com/products-solutions/products/wan-optimization-steelhead/ ryan On 1/24/14 2:46 PM,

Re: [WISPA] remote employees

2014-01-23 Thread D. Ryan Spott
+1 to this. I was party to a case where the employer was giving out stock options for overtime submitted during on-call time and other time. Labor law goes for triple damages. [(amount not paid + interest + fines) * 3] The lawyer summed up FLSA and overtime like this: You can pay 1 chicken

Re: [WISPA] remote employees

2014-01-22 Thread D. Ryan Spott
It is more a management issue than a remote employee issue. Get some sort of IM system that shows availability. (Skype, AIM etc) This allows everyone to know where everyone is all the time. If it supports video and screen sharing then even better. Be flexible on hours and focus on him more

[WISPA] HAM colo costs

2014-01-13 Thread D. Ryan Spott
For those of you that own towers or just know... What do HAM operators usually get charged for colocation? ryan ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Ethernet over power lines (not the failed power company BPL trials)

2013-12-29 Thread D. Ryan Spott
In trailer parks and RV parks we use them to move bandwidth out to the far edges of the park. This helps us get past the big metal signal blocking RVs. They DO NOT work past or through a transformer. ryan On 12/28/13 6:49 AM, ralph wrote: I am writing this because I just read an old

Re: [WISPA] TEGs / Thermo Electric Generators

2013-11-26 Thread D. Ryan Spott
and always working is a bonus. :) ryan On 11/26/13 9:25 AM, Scott Carullo wrote: Remember, I can buy 4 7Kw gensets instead of the one tiny TEG :) Scott Carullo Technical Operations 855-FLSPEED x102 *From*: D. Ryan Spott

Re: [WISPA] TEGs / Thermo Electric Generators

2013-11-26 Thread D. Ryan Spott
of AK: http://ota-cdn.fas.org/reports/9423.pdf or somewhere way past Pluto: http://voyager.jpl.nasa.gov/spacecraft/instruments_rtg.html :) ryan On Nov 26, 2013, at 10:26, D. Ryan Spott rsp...@irongoat.net mailto:rsp...@irongoat.net wrote: *Someone* lives in Florida and does not need

Re: [WISPA] TEGs / Thermo Electric Generators

2013-11-26 Thread D. Ryan Spott
that provides heat for the radio shack as well. Terry -Original Message- From: D. Ryan Spott Sent: Monday, November 25, 2013 10:15 PM To: WISPA General List Subject: Re: [WISPA] TEGs / Thermo Electric Generators Who was this from? Remember there is ZERO

Re: [WISPA] TEGs / Thermo Electric Generators

2013-11-25 Thread D. Ryan Spott
Who was this from? Remember there is ZERO maintenance on a TEG. ryan On 11/25/13 9:04 PM, Mike Lyon wrote: So i heard back on pricing today for the 100 watt propane TEG. $7960 plus a $300 mount. It's a cool idea but a Generac 7kw propane genset for $1900 with free Amazon Prime shipping

Re: [WISPA] question for the group

2013-09-19 Thread D. Ryan Spott
I have never seen this enforced in my limited experience. Most manufacturers have classes you can attend to become a 'professional'. ryan On 9/19/13 7:53 PM, Chris Stradtman wrote: Hi all, Most of my work is done inside so I don't really deal with most of the WISP issues. However I'm

Re: [WISPA] DISH Network Dropping Us

2012-12-27 Thread D. Ryan Spott
Would it be possible for WISPA to become a master reseller ala NRTC? ryan On 12/27/2012 1:07 PM, Paul Diem wrote: We signed up as a DISH Network reseller back in 2010 when they were approaching WISP's. We've averaged around 3+ new DISH installs per month. Last month we received notice that we

Re: [WISPA] [WISPA Members] Contractor Needed

2012-12-13 Thread D. Ryan Spott
Try this: http://cabletv.org/mailman/listinfo/cabletv-list or this: cabl.com ryan On 12/13/2012 12:41 PM, Jay DeBoer wrote: We are looking for a contractor to handle 3 Cable TV system in Southern Indiana. Responsibilities would range from Installs to line work to Head-Ends. If Interested

Re: [WISPA] tranzeo management

2012-10-13 Thread D. Ryan Spott
You mean upload from the radio? yeah, you can use curl to do this. Take a look at tranzeofaq.com the autoconfig.txt file: http://tranzeofaq.com/autoconfig.txt You could shape things like this:

Re: [WISPA] What is everybody using for alarms?

2011-09-25 Thread D. Ryan Spott
Nagios does this quite well. ryan On Sep 24, 2011, at 4:35 AM, Paolo Di Francesco paolo.difrance...@level7.it wrote: Hi Ed I was looking also for something that sends one report email in case of failure when multiple nodes are down. If 50 nodes are down and part of the network is

[WISPA] Bullet2M HP

2011-03-30 Thread D. Ryan Spott
ANYONE know of ANY in stock? ryan WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org

Re: [WISPA] Redboot help

2011-02-04 Thread D. Ryan Spott
The NS2s can be odd.. You have to pretty much keep booting them while running the open-mesh-flash.exe app from a windoze machine. I sometimes have to reboot the NS2 3 or 4 times to get it happy. ryan -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] Redboot help

2011-02-04 Thread D. Ryan Spott
] Redboot help -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 You did this from stock ubnt firmware? Or post openwrt flash? Or... On 02/04/2011 02:09 PM, D. Ryan Spott wrote: The NS2s can be odd.. You have to pretty much keep booting them while running the open-mesh-flash.exe app from a windoze

Re: [WISPA] Tranzeo and Ubnt

2011-01-30 Thread D. Ryan Spott
Ugh... I had 900 stuck in my head... I meant an SL-2! :) ryan On Jan 30, 2011, at 4:59 AM, Phil Curnutt wrote: CPQ-19= AirGrid 2G20 HP SL9=NanoStation Loco Phil WISPA Wants You! Join today!

Re: [WISPA] Dropping Clients

2010-11-21 Thread D. Ryan Spott
Do you have any sort of trending for this site? Mrtg? Cacti? Tranzeo has snmp OIDs for signal and noise. ryan On Nov 21, 2010, at 4:53 PM, ~NGL~ n...@ngl.net wrote: Spoke to soon, starting to drop clients. From: ~NGL~ Sent: Sunday, November 21, 2010 4:28 PM To: WISPA General List

Re: [WISPA] Monitoring batteries

2010-10-27 Thread D. Ryan Spott
I use a superRMS 2 from these guys: http://www.remotemonitoringsystems.ca/ The software they put on these things is just a little more polished than the packetflux stuff. I use both and love the cost of the packetflux equipment. Http://www.irongoat.net/sites/mtsultan is a private link that

Re: [WISPA] P2P/copyright notifications for RLC students

2010-10-22 Thread D. Ryan Spott
Did you bill PeerMedia Technologies for your time to deliver this to the end user?ryan On Friday, October 22, 2010 at 7:21 AM, David E. Smith wrote: I just received three notices of claimed

Re: [WISPA] Digital Loggers script

2010-07-14 Thread D. Ryan Spott
Gimme an ip/username and password and I'll make your life more exciting! ;) ryan On Jul 14, 2010, at 6:37 PM, Mike m...@aweiowa.com wrote: Ryan: I will check into if that works for me. Unfortunately, if I had a day to spare I’d wash my Jeep, Roundup the lane, and get a massage.

Re: [WISPA] Burying Cable

2010-06-10 Thread D. Ryan Spott
This is easy... Explain to your customer that you do not trench and you have to run cable across the yard. Lay the cable out and tell them to bury it. I tell my customers to bury the cable buy placing a shovel in the sod and just cutting down far enough to get under the sod. Then stuff in the

Re: [WISPA] Customer ID-10-T problems

2010-06-09 Thread D. Ryan Spott
I used to work for a colo firm and we had a customer come in with sabers rattling and lawsuit threats flying that we had allowed his colocated server to be hacked He proved it by sending us the source code of the web-page served by his server... We were a bit puzzled until we viewed the

Re: [WISPA] You knew it was coming...

2010-06-03 Thread D. Ryan Spott
App Store - Search ATT - download app. ryan On Wed, Jun 2, 2010 at 12:44 PM, Mike Hammett wispawirel...@ics-il.netwrote: I believe Android systems will. I'll know for sure Friday when I get the Evo 4G. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On

Re: [WISPA] ROS on x86 - Backup Everything (system, config, license)?

2010-06-03 Thread D. Ryan Spott
Then use 2 coconuts to produce a oh never mind! Is Ginger there? Cause if she is, I need to visit. ryan On Thu, Jun 3, 2010 at 7:54 AM, Greg Ihnen os10ru...@gmail.com wrote: Because I'm in the Amazon jungle. No UPS, FedEx, USPS etc. It's like Gilligan's Island but we have satellite

Re: [WISPA] ROS on x86 - Backup Everything (system, config, license)?

2010-06-03 Thread D. Ryan Spott
:08 AM To: WISPA General List Subject: Re: [WISPA] ROS on x86 - Backup Everything (system, config, license)? No Ginger, but if topless brown-skinned beauties floats your boat then you're in luck! On Jun 3, 2010, at 10:35 AM, D. Ryan Spott wrote: Then use 2 coconuts to produce a oh

Re: [WISPA] Availability Monitoring

2010-06-03 Thread D. Ryan Spott
I do this for my network and my competitors. :) Nice to compare apples to rotten apples. ryan On Jun 3, 2010, at 3:10 PM, Nick Huanca n...@greataukwireless.com wrote: Hi all, I wanted to see if anyone has any ideas on Availability Monitoring of core devices and APs. Is anyone out

Re: [WISPA] Google Pac Man Survey Results

2010-05-25 Thread D. Ryan Spott
http://www.huffingtonpost.com/2010/05/25/google-pacman-doodle-devo_n_588605.html 4.8 MILLION hours of time! :) ryan On Tue, May 25, 2010 at 8:43 AM, Marlon K. Schafer o...@odessaoffice.comwrote: Isn't that funny. Galaga is my favorite too! My wife loves Pacman. So near as I can tell men

Re: [WISPA] Good reliable b/g/n inside AP

2010-05-24 Thread D. Ryan Spott
What is a Ruckus box running now-a-days? ryan On Mon, May 24, 2010 at 9:02 AM, Jeff Ehman jeh...@cticonnect.com wrote: Ruckus Wireless. Hands down. Their smart antenna array, price point and simple configuration/maintenance are unmatched. Plus, this pertains to larger projects but if

Re: [WISPA] Google Pac Man

2010-05-21 Thread D. Ryan Spott
I used to spend 12-15 hours a day playing this. I think I wore out several Atari 2600 joysticks. I am not a gamer as my fast twitch muscles were not fast enough for games faster than Pacman. My wife was not aware of this past history and foolishly challenged me to a Mrs Pacman table-top game at a

Re: [WISPA] Google Pac Man

2010-05-21 Thread D. Ryan Spott
wife likes role playing, lol, happy Friday! Forbes On 5/21/2010 8:58 AM, Robert West wrote: That's a moment that any man can be proud of. LOL! Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of D. Ryan Spott Sent

Re: [WISPA] Bandwidth

2010-05-20 Thread D. Ryan Spott
What do your trends show you? Take your yearly graph and draw a line along the averages. Extend this line what does it do? ryan On Thu, May 20, 2010 at 6:54 AM, RickG rgunder...@gmail.com wrote: When you peak at 65-75 percent its probably time to add more. It depends on how fast your

[WISPA] Times Microwave tools for LMR 400...

2010-05-17 Thread D. Ryan Spott
I am looking for the following: EZ-400-NMH-D Connector CCT-01 Tool (cutter) ST-400EZ tool (cable Prep tool) DBT-U (deburr tool) HX4 Tool (crimp tool) Separately or in a kit... Does anyone have a favorite Vendor? I saw one vendor selling a kit for LMR400/600 with all of the above parts. They

Re: [WISPA] Hamvention

2010-05-16 Thread D. Ryan Spott
It wasn't a she... and it was all night baby :) ryan On Sun, May 16, 2010 at 9:38 PM, Robert West robert.w...@just-micro.comwrote: What? Then who was it I spent the day with???!!! She said her name was Rickesha. - Original Message - From: RickG rgunder...@gmail.com To:

Re: [WISPA] Customer Speed Tests

2010-05-13 Thread D. Ryan Spott
Take a look at http://www.brandonchecketts.com/open-source-speedtest I modified mine to save speedtests that my clients run so I can review them at a later date. This helps me spot trends. I let my customers see the last 5 or so speedtests. Some advice: 1. Make sure you save ALL of the

Re: [WISPA] Call Tracking / Customer management software

2010-05-11 Thread D. Ryan Spott
$1 For everything or just half the features? ryan On Tue, May 11, 2010 at 12:28 PM, Josh Luthman j...@imaginenetworksllc.comwrote: Something like $1/active account. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final,

Re: [WISPA] Call Tracking / Customer management software

2010-05-11 Thread D. Ryan Spott
:55 PM, Mark Nash - Lists markl...@uwol.netwrote: I personally think it's more like $1.35/sub or $1.65/sub for everything. Our normal bill is about $1200/mo I think for 850 subs. - Original Message - From: D. Ryan Spott rsp...@irongoat.net To: WISPA General List wireless@wispa.org Sent

Re: [WISPA] Bandwidth Cap Implementation

2010-05-07 Thread D. Ryan Spott
Hey Matt, Can you give us your customers' reaction to this change after a few weeks? ryan On Thu, May 6, 2010 at 11:11 PM, Matt Larsen - Lists li...@manageisp.comwrote: Since there has been a lot of discussion about bandwidth caps on this list recently, I thought that I would share the one

Re: [WISPA] Tranzeo - Again.....

2010-05-05 Thread D. Ryan Spott
Tranzeo APs (not the EL models) are great for small 15 sub sites. After that, they tank. ryan On Wed, May 5, 2010 at 8:40 AM, Marlon K. Schafer o...@odessaoffice.comwrote: I have yet to find a Tranzeo AP that works. Pull it out and put nearly anything else in it's place. I use MT for ap's

Re: [WISPA] Tranzeo - Again.....

2010-05-05 Thread D. Ryan Spott
I think you are going to see more discussion on the http://lists.wispa.org/mailman/listinfo/tranzeo_wimax_users with the recent purchase of Aperto they might be THE way to get into wimax for a reasonable price. ryan On Wed, May 5, 2010 at 7:37 PM, Kurt Fankhauser k...@wavelinc.com wrote:

Re: [WISPA] Rocket M5

2010-04-26 Thread D. Ryan Spott
Is that a 'ptp' link or a 'ptmp' link? The sector hints at this being the latter. Also, what sort of pps are you seeing on this link? ryan On Apr 26, 2010, at 1:13 PM, Michael Baird m...@tc3net.com wrote: Oops, actually that's wrong. I've got a rocket m5/rocketdish 30 on one side, and a

Re: [WISPA] WISPA TV Whitespaces Meeting with the FCC

2010-04-05 Thread D. Ryan Spott
L-R Ryan, John, Alex, Jack and Stephen. ryan On Apr 5, 2010, at 5:41 AM, Steve Barnes st...@pcswin.com wrote: This is a great report good job guys and thank you. Next question. I don't know any of the team personally just from your posts. The picture in the report, can you give us a

Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-30 Thread D. Ryan Spott
really good TV reception It tells them something so they get less interested and leave you alone. ryan On Mar 29, 2010, at 8:25 PM, Mike Mattox wi...@mcmsys.com wrote: SSSH, aliens Signal is great where we can see it, just needed a good fix for not having to do the 2 man show

Re: [WISPA] Building Heights?

2010-03-30 Thread D. Ryan Spott
12 feet per floor is how we do it in the fire service. 10 feet per floor for residential. But RF is diffrent than fire behaivior... Well I guess both can burn you. ;) ryan On Mar 30, 2010, at 10:38 AM, Marlon K. Schafer o...@odessaoffice.com wrote: Clyde M. taught me a cool trick.

Re: [WISPA] 5.4 legal ptp radios

2010-03-11 Thread D. Ryan Spott
The TR5a does have DFS. I think Damian Wallace's rant goes like this: We give the radio to a testing lab, and they do FCC testing. Then they tell us to listen for some sort of signal... and they give us like eleventy-billion signatures to listen for. Then they take our

Re: [WISPA] iPhone ssh app

2010-03-11 Thread D. Ryan Spott
I use touchterm. It does the needfull. :) ryan On Mar 11, 2010, at 1:54 PM, Data Technology w...@dtisp.com wrote: I know in the last couple of weeks there was a discussion about an ssh app for the iPhone. I did not save the emails because I thought I would never need something like

Re: [WISPA] iPhone ssh app

2010-03-11 Thread D. Ryan Spott
Ima gonna tell stevie jobs on you! :) ryan On Mar 11, 2010, at 1:57 PM, Sales sa...@michianawireless.com wrote: Hmm I just goto my iPhones command line via shell and type ssh ipaddress works like a charm. John Buwa Michiana Wireless,Inc 574-233-7170 Sent from my iPhone On Mar 11,

Re: [WISPA] Moisture Abatement Techniques

2010-03-02 Thread D. Ryan Spott
The rule is to never stretch the last 2 winds of the tape as you put it on... and ALWAYS *CUT* the tape, never rip it. Ripping implies stretching till failure. I can always tell who rips and who cuts on towers by the number of vinyl flags flapping when I climb by other antennas on the

Re: [WISPA] bit torrents

2010-02-14 Thread D. Ryan Spott
I allow it at 4kbps... For the entire network. muhahahahahahah *cough* But seriously. I have a play nice policy. If someone is affecting other users, we call them and ask them to slow down thier up/downloads so they don't piss off thier neighbors. My wife called one of our customers to ask

Re: [WISPA] Packet flux shunt

2010-02-08 Thread D. Ryan Spott
Backwoodssolar.com Look under meters. ryan On Feb 8, 2010, at 12:42 PM, Scott Piehn li...@jcwifi.com wrote: I am looking for a shunt to monitor a wind turbine. that would work with the packet flux product Turbine is 400w at 12 V so I think I should get a 50Amp one. to 100 Millivolt

Re: [WISPA] Insurance

2010-02-03 Thread D. Ryan Spott
Certificate of insurance. ryan On Feb 3, 2010, at 7:38 PM, Robert West wrote: I think the technical insurance term for that is coveringyourass. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent:

Re: [WISPA] EBS Licensing

2010-01-21 Thread D. Ryan Spott
Or the cash equivlent? I can't wait to see what happens in...oh...6 years or so when these school boards renegotiate the 10 year subleases of this spectrum. Could be an interesting and lucrative time for those districts that are getting peanuts for rent of thier spectrum. ryan On Jan 21,

Re: [WISPA] MT Mikropoynt

2010-01-09 Thread D. Ryan Spott
I leave the head on invade I need to have a light. Best part is I always have a battery for my drill if I run out of juice while driving lags!! ryan On Jan 9, 2010, at 4:24 AM, Eric Rogers ecrog...@precisionds.com wrote: We did something similar with the pivot Dewalt flashlight. Since

Re: [WISPA] Bandwidth limitation enforcement

2009-12-30 Thread D. Ryan Spott
Uh.. Dell GX150 i think? It has a celeron slow as heck processor. I found it near a dumpster at some point. The license cost me $45. Originally I used it to find the bandwidth hogs, now I control them with it. Wonderful stuff I tell you! ryan On Dec 30, 2009, at 2:40 PM, Ugo Bellavance

Re: [WISPA] Wimax gear

2009-12-30 Thread D. Ryan Spott
Hi RALPH! ryan On Dec 30, 2009, at 5:14 PM, Ralph wrote: Go ahead and live the dream then, but please don't homebuild your own gear and deploy it in any of my markets. We prefer certified products. On Dec 30, 2009, at 8:10 PM, e...@wisp-router.com wrote: You can use MikroTik and be legal.

Re: [WISPA] Being Rude to Customers

2009-12-22 Thread D. Ryan Spott
Alcoholism is the leading cause of rude customers. Quite a few customers on our network have a do not call after 8:3, 9:30, 10:20AM note because they are totally out of it. Perfectly polite people before that time.. but after... WOW! ryan On Dec 22, 2009, at 12:27 PM, Robert West wrote:

Re: [WISPA] Being Rude to Customers

2009-12-22 Thread D. Ryan Spott
and lcd panels but eventually it dies from repeated abuse. Or beer being spilled on it. Works for awhile until it gets fuzzy inside. Yuck! Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of D. Ryan Spott Sent: Tuesday

Re: [WISPA] Ubiquiti Nanostation NSM5

2009-12-16 Thread D. Ryan Spott
You will have 1 container less to count if the shipment comes in at the right time! :) ryan On Dec 16, 2009, at 5:58 PM, Eje Gustafsson wrote: Yepp that is the shipment with the antennas. I thought the antennas was on the shipment we were to receive last week but it's on the shipment

Re: [WISPA] Telephones such. Was:Not About Health Insurance

2009-12-09 Thread D. Ryan Spott
On some smart-phones you can set them so only the people in your address book get CID. Everyone else is blocked. ryan On Dec 9, 2009, at 9:59 PM, RickG wrote: Yes on VZW. Now that may be the way to go. I tried blocking CID but hated that my wife son didnt know it was me calling.

Re: [WISPA] Fixing buried cable

2009-12-08 Thread D. Ryan Spott
If you are running more than 6-7mbits then use some other splice or replace the whole cable. If you are running less than this, then most any splice will work. :) ryan On Dec 8, 2009, at 2:45 PM, Robert West robert.w...@just-micro.com wrote: I think anything you do, as long as the

Re: [WISPA] Tranzeo TR-902 Firmware

2009-12-01 Thread D. Ryan Spott
Can you be more specific? ryan On Dec 1, 2009, at 3:00 PM, NGL n...@ngl.net wrote: Has anyone had problems with the new Firmware TR6-5.0.2Rt? If so what and what is the fix? --- --- --- --- WISPA Wants You! Join

Re: [WISPA] Cat3 instead of Cat5

2009-11-18 Thread D. Ryan Spott
Rick, Do you provide 100mbps service to consumer level connections via wireless links? If I can get 4-12mbits down a cat3 or telco wire for a home user then then I'll probably go for it. ;) Ryan On Nov 18, 2009, at 9:06 AM, RickG rgunder...@gmail.com wrote: Those old phone line units

Re: [WISPA] Nano Sation 2

2009-11-12 Thread D. Ryan Spott
I have been hearing 'bout that '1-2 week period' for about 10 weeks now. Ryan On Nov 12, 2009, at 3:13 PM, Robert West robert.w...@just- micro.com wrote: Wlanparts has it. I also got an email from Ben over at Ubiquiti who says ...the big volumes haven't landed yet...There are some that

Re: [WISPA] Metered Billing

2009-11-09 Thread D. Ryan Spott
When I setup metering for the colo I used to work for we bought in $15k in overages a month. It was great! Ryan On Nov 7, 2009, at 10:59 AM, Scott Reed scottr...@onlyinternet.net wrote: With the proper setup the network complexity does not change. Why would I want to give up

Re: [WISPA] Buffering video.

2009-10-15 Thread D. Ryan Spott
On Youtube, right click and change the buffer to infinity. You have to do this for each website. *.youtube.com, *.youporn.com etc... ryan On Oct 15, 2009, at 8:22 PM, Mike wrote: How come the Windows video codecs don't buffer before playing? If youtube videos stutter, I hear about it.

Re: [WISPA] Competitor at -40

2009-10-13 Thread D. Ryan Spott
Ha! I have a pic of a competitor pointing a 13db 900 MHz panel at my gear. 30 feet away at the same colo site! ryan On Oct 13, 2009, at 11:41 AM, Jeremy Parr jeremyp...@gmail.com wrote: Gotta love it. Picking up another wisps overamped Omni at -40 with a 16dbi panel, pointed *away* from

Re: [WISPA] To G or not to G :-)

2009-10-04 Thread D. Ryan Spott
(below is from http://en.allexperts.com/e/i/ie/ieee_802.11e.htm) HCCA: The HCCA works a lot like the PCF: the interval between two beacon frames is divided into two periods, the CFP and the CP. During the CFP, the Hybrid Coordinator (HC) controls the access to the medium. During the CP, all

Re: [WISPA] OT - Text Messages

2009-09-29 Thread D. Ryan Spott
Nah, she is not screwed up. My 6 year old has already told me she wants to 'play antenna' like daddy when she grows up. She also wants to drive the bucket truck as her car when she learns to drive! ryan On Sep 29, 2009, at 8:14 AM, St. Louis Broadband li...@stlbroadband.com wrote:

[WISPA] Mountaintop Propane...

2009-09-02 Thread D. Ryan Spott
Hello, While this is not necessarily a WISP issue, I would like to lean on the experience of the WISPs and wireless operators on these lists. I am building a new repeater site on the top of a 4K foot peak. I have my solar worked out and I am augmenting it with a TEG. The TEG burns propane and

Re: [WISPA] Changing cards in Mikrotik - now Safety First

2009-08-25 Thread D. Ryan Spott
I think IIFSTA and the NFPA (while gathering lots of $$) helped quite a bit more than OSHA. :) ryan Forbes Mercy wrote: I have to agree here, I've done more tower climbs alone than I should. Every time I do I'm filled with the feeling that if I fall no one will know until someone comes

[WISPA] Mountain Top Grounding

2009-08-23 Thread D. Ryan Spott
I have a site I am putting in on a mountain-top consisting of stacked rocks. Well, they were stacked by glaciers, Techtonic movements, Paul Bunyan etc... Mostly 6-30 across with bedrock downthere somewhere. Do any of you have a site like this? How did you or the site owner ground the

Re: [WISPA] Handheld GPS recommendations, anyone?

2009-08-21 Thread D. Ryan Spott
Most of the GPS capability on cell phones is quasi GPS using cell tower locations to give location data. When there is only 1 cell tower in the area, it is sorta hard to do triangulation! ryan On Aug 21, 2009, at 5:45 AM, Scott Reed wrote: Because 1/2 the cell phones on the planet don't

Re: [WISPA] Mikrotik Redirect

2009-08-12 Thread D. Ryan Spott
Someone on the list had a story about causing a panic when a screen with you didn't pay your bill was flashed to an early morning employee. I guess they thought the company was shutting down. Now the page just says: Please contact us. ryan On Aug 12, 2009, at 1:08 PM, Jason Wallace wrote:

Re: [WISPA] work order software

2009-08-10 Thread D. Ryan Spott
zendesk.com Wonderful. :) Free or really cheap. ryan On Aug 10, 2009, at 7:08 PM, RickG wrote: Any idea of price? -RickG On Mon, Aug 10, 2009 at 3:21 PM, Curtis Maurandcmaur...@xyonet.com wrote: I kind of like this one. http://www.accord5.com/trellis Jason Hensley wrote: We use

Re: [WISPA] Tranzeo 900 Latency

2009-08-08 Thread D. Ryan Spott
Remember that you can do these changes from the command line with Curl! Use Curl to do something like this: curl -m 10 -u username:password http://1.2.3.4/set_config.cgi?wireless.beacon_period=1000admin.cmd=store curl -m 10 -u username:password http://1.2.3.4/set_config.cgi?admin.cmd=reboot No

Re: [WISPA] Tranzeo 900 Latency

2009-08-06 Thread D. Ryan Spott
Hey Marlon, Are you totally bridged or are you routed to each Tower? ryan Marlon K. Schafer wrote: Most of my tranzeo AP's have had to be replaced due to similar things. They started out good, but as people have done more things with the internet they are dying. We're changing them ALL.

Re: [WISPA] Tranzeo 900 Latency

2009-08-06 Thread D. Ryan Spott
that goes in usually doubles the speeds and has NO problems with lockups etc. marlon - Original Message - From: D. Ryan Spott rsp...@cspott.com To: WISPA General List wireless@wispa.org Sent: Thursday, August 06, 2009 11:38 AM Subject: Re: [WISPA] Tranzeo 900 Latency Hey Marlon, Are you

Re: [WISPA] Tower Locations

2009-07-23 Thread D. Ryan Spott
Hrm... Wifi for tugboat operators... ryan -Original Message- From: Blake Bowers bbow...@mozarks.com Sent: Thursday, July 23, 2009 8:28 AM To: WISPA General List wireless@wispa.org Subject: Re: [WISPA] Tower Locations I have nothing to do with these towers - I have been offered them a

Re: [WISPA] NCIC, FIPS, and wireless

2009-07-22 Thread D. Ryan Spott
I provide some service to the local PD. You provide transport, and transport only. The PD and their IT guys should do all of the encryption... You REALLY don't want to be responsible for the security of their data. Does the telco provide encryption? No way.. Easy and cheap to do, but the risk!

Re: [WISPA] 802.11 CPE's

2009-07-21 Thread D. Ryan Spott
As a WISPA member I suggest a WISPA vendor: http://www.linktechs.net/ that sells FCC Cert-ed systems. I think WISPA members get a discount... But I am not sure. ryan On Jul 20, 2009, at 3:09 PM, Mike wrote: Looking for a good MT vendor. The fellow I've been trying to work with has gone

Re: [WISPA] FW: Introducing Bullet M: 100+Mbps Real TCP/IP Throughput

2009-07-21 Thread D. Ryan Spott
A vendor local to me lamented that he had JUST bought several cases of ns2 and right when he recieved the often delayed for manufacturing shipment... They released the pico bullet etc line so all of his inbound sales calls were 'hey! Do you have any poco bullets etc in stock?' Why doesn't

Re: [WISPA] 802.11 CPE's

2009-07-20 Thread D. Ryan Spott
AM To: WISPA General List Subject: Re: [WISPA] 802.11 CPE's One thing is for sure..Tranzeo is pretty solid once you get them in place. On 7/19/09, D. Ryan Spott rsp...@cspott.com wrote: Tranzeo CPQ19? They are not bad... really! I have several hundred in the air. ryan On Jul 18

Re: [WISPA] OT Hotmail email black hole

2009-07-10 Thread D. Ryan Spott
Can you give more detail as to what requirements were placed on you? With more details I might be able to help you. I was tier-4 at MSN/Hotmail/Passport for a bit. (these services are now called Live, or Bing, or whatever they call them this week!) ryan Marlon K. Schafer wrote: Hi All,

Re: [WISPA] residential repeater site contract

2009-06-25 Thread D. Ryan Spott
My repeater contact is simple. If un-served-behind-the-big-rock-customer (USBTBR) wants service, they need to talk to their neighbor about it. If they establish some sort dialog, then the house-with-service-customer (HWSC) calls me to tell me it is OK. I find that this makes it a

[WISPA] Looking for service on Tonganoxie Rd, Leavenworth, KS 66048

2009-06-23 Thread D. Ryan Spott
Looking for service in this area: http://maps.google.com/maps?q=2560+tonganoxie+rd+leavenworth,+ksie=UTF8split=0gl=usei=uvVASqz9JI_KsQOnrPyMCQll=39.236292,-94.978931spn=0.012199,0.019312t=hz=16iwloc=A Does anyone service this area outside of Leavenworth/Lansing? ryan

Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ???

2009-06-09 Thread D. Ryan Spott
http://www.tranzeofaq.com/oct102008.html ryan Kurt Fankhauser wrote: Well I thought that it happened this way, I may be wrong, - Tranzeo didn't want to look at the problem and somebody on the list did some packet sniffing and the Tranzeo's were randomly sending a bunch of 0o0o0o0o0's and

Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ???

2009-06-09 Thread D. Ryan Spott
Kevin Lamothe wrote: We've had other issues with the latest firmware, we mostly use Cisco APs, after a fw 4.0.2 radio associates, it will take anywhere from 2-10 minutes before the radio can pass any traffic, this issue wasn't present in 3.6.7. Their new management VLAN tagging feature

Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ???

2009-06-09 Thread D. Ryan Spott
Kurt Fankhauser wrote: Tranzeo informed me yesterday that they will not support Mikrotik related problems. Dude, I have this network problem, on my network, and because you are on this list, I want you to fix it for me... at your cost. OH! and it requires replacing a tower, please pay for

Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ???

2009-06-09 Thread D. Ryan Spott
Why you would route AT the AP boggles my mind... Routing Before the AP is the way to go. Why add additional load on an AP when it should be working on sending and receiving wireless data. ryan Rick Kunze wrote: I've got about 50 or 60 CPQ's and SL2's out there, as well as a dozen or so

Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ???

2009-06-09 Thread D. Ryan Spott
Solutions http://www.ics-il.com -- From: D. Ryan Spott rsp...@cspott.com Sent: Tuesday, June 09, 2009 1:38 PM To: rku...@colusanet.com; WISPA General List wireless@wispa.org Subject: Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ??? Why

Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ???

2009-06-09 Thread D. Ryan Spott
because they couldn't do their UPS shipping until we did. Apparently, we may need to move all of them to bridge mode but with hundreds of units out there I really don't like that idea. steve D. Ryan Spott wrote: Why you would route AT the AP boggles my mind... Routing Before the AP

Re: [WISPA] Electronic Signatures

2009-06-08 Thread D. Ryan Spott
I think in most states paying the bill obligates you to the terms of service/contract. ryan Charles Wyble wrote: Ah. Gotcha. Thanks for clarifying. RickG wrote: Having an AUP is fine but it doesnt spell out the terms of a specific obligation between you the end user. The big

Re: [WISPA] [WISP] 900 PtP

2009-06-05 Thread D. Ryan Spott
of the competitive pressure of Tranzeo/UBNT handing out 802.11b/g type speeds over 900mhz. ryan Dave D. Ryan Spott wrote: http://www.tranzeofaq.com/images/lewis.jpg This is a 900Mhz Client running at 5Mhz on TR902 radios. The AP is a TR902-13 and the client is a TR902-N with a 15DB yagi

Re: [WISPA] 3.65 Wimax

2009-06-05 Thread D. Ryan Spott
I agree. When you see wifi vendors with sub-$1000 APs in the 2.4 space and they suddenly want to sell yo basically the same tech (at a different freq range) for $1 there is a problem. Someone is cashing in on hype becase the RD CANNOT be that expensive when you take volume of CPE/AP sales

  1   2   3   4   >