Re: [WISPA] Who is using Towercoverage.com ?

2014-04-11 Thread Eric Muehleisen
Curious, I believe Towercoverage uses a form of Radio Mobile to create their maps. I have some experience with Radio Mobile, but does their coverage maps support dual-pol or slant for that matter? Would it make any difference in the in the outcome of the map? On Fri, Apr 11, 2014 at 8:54 AM, Bob

Re: [WISPA] 3650 Omni

2014-04-08 Thread Eric Muehleisen
Doesn't answer your question but, we've use splitters and sector antennas to get around the use of omni's. There are a couple of advantages to sector design. Downtilt being the most important. However, it does cost more tower rent and cable management can be a pain. We've used it with great

Re: [WISPA] Dual Frequency AP Radio

2014-02-13 Thread Eric Muehleisen
Maybe I'm misunderstanding the question, but there are several AP's that support dual-band operation inside an integrated unit. Ruckus and Ubiquity have integrated units that broadcast 2.4 and 5.7 simultaneously using the same or different SSID. On Thu, Feb 13, 2014 at 6:38 AM, Sam

Re: [WISPA] Cambium 450 Slow Interface

2014-01-02 Thread Eric Muehleisen
Run wireshark while on the GUI and see if anything interesting shows up On Thursday, January 2, 2014, heith petersen wrote: Since last week I have been struggling with a 450 AP, our first one. I don’t appear to be losing any performance, but the interface is struggling, taking almost 30

Re: [WISPA] Comcast asking FCC for more 5GHz spectrum.

2013-11-15 Thread Eric Muehleisen
http://www.ruckuswireless.com/press/releases/20130610-ruckus-adds-zoneflex-7781cm-access-point-to-its-portfolio $5k MSRP. Even at half that...ouch! On Fri, Nov 15, 2013 at 8:37 AM, Gino Villarini g...@aeronetpr.com wrote: Anyideas on the cost? It would be a great addition to any aerial fiber

Re: [WISPA] Trango M900 ap

2013-06-13 Thread Eric Muehleisen
upgrade instructions, examples and procedures here. https://dl.dropboxusercontent.com/u/1578608/Public/Trango_900.zip On Thu, Jun 13, 2013 at 11:24 AM, Terry White twh...@ueci.coop wrote: I had a trango M900 ap that got hit by lightning and I had to replace it. the one I replaced it with has

Re: [WISPA] Has Anyone seen this on 3.65

2012-10-05 Thread Eric Muehleisen
That sounds about right. Noise at -55 is awfully loud. They'd need to be right on top of you. -Eric On Fri, Oct 5, 2012 at 4:12 PM, Michael Geary mge...@greataukwireless.comwrote: Good Evening Christian, This had happened on some our APs. We had to replace them because of manufacturers

Re: [WISPA] Wire shark !

2012-08-31 Thread Eric Muehleisen
The device should send an arbitrary ARP upon bootup. This can be captured via Wireshark and viewed easily with ARP filter. -Eric On Fri, Aug 31, 2012 at 11:35 AM, Josh Luthman j...@imaginenetworksllc.comwrote: Are you saying the APs just randomly put packets out there? Josh Luthman Office:

Re: [WISPA] Wire shark !

2012-08-31 Thread Eric Muehleisen
, Aug 31, 2012 at 12:55 PM, Eric Muehleisen ericm...@gmail.comwrote: The device should send an arbitrary ARP upon bootup. This can be captured via Wireshark and viewed easily with ARP filter. -Eric On Fri, Aug 31, 2012 at 11:35 AM, Josh Luthman j...@imaginenetworksllc.com wrote: Are you

Re: [WISPA] Inexpensive alarm monitor

2012-03-27 Thread Eric Muehleisen
Call your generator manufacturer or reseller and ask about a fault/run relay board. We ordered relay boards for our Kohler generators for only $200 ish. http://www.apelectric.com/GM53102-KP1-Kohler-Common-fault-relay-p/gm53102-kp1.htm The boards relay run/faults to a APC AP9631 card that is setup

Re: [WISPA] What are the must have Android apps for installers

2012-02-24 Thread Eric Muehleisen
Google Maps/Earth. Points to you to your towers. -Eric On Fri, Feb 24, 2012 at 11:46 AM, Pat O'Connor p...@inlandnet.com wrote: Upgrading to a smartphone, HTC Hero S. Just wanted to see what tools are available for wireless installers. ___

Re: [WISPA] painting an antenna

2012-02-24 Thread Eric Muehleisen
I have some experience. Hit me offlist. -Eric On Fri, Feb 24, 2012 at 11:46 AM, brandon jolley brandonjoll...@gmail.comwrote: Hi Any Trango 900 Users out there that might be able to help me with a issue I am working on? thanks Brandon ___

Re: [WISPA] Splitters with Motorola Canopy 320 - Results Update

2011-10-25 Thread Eric Muehleisen
Thanks for posting your results Chuck. I've been looking into this idea for a while, but never pulled the trigger. I presume you used the Moto stock sectors? -Eric On Tue, Oct 25, 2011 at 8:39 AM, Chuck Hogg ch...@shelbybb.com wrote: I thought I would post back on here what we did and our

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Eric Muehleisen
Replace the fuse? If you have an older AN-50 laying around and don't mind voiding warranty, you can crack the box and swap power supplies. -Eric On Tue, Feb 1, 2011 at 4:45 PM, Mike Hammett wispawirel...@ics-il.netwrote: I have an AN-50e that won't power on. I have tried either and both of

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Eric Muehleisen
: Dozens of problems with them. Not one fuse problem. On Feb 1, 2011 5:49 PM, Eric Muehleisen ericm...@gmail.com wrote: Replace the fuse? If you have an older AN-50 laying around and don't mind voiding warranty, you can crack the box and swap power supplies. -Eric On Tue, Feb 1, 2011

Re: [WISPA] Motorola PMP 320

2010-12-17 Thread Eric Muehleisen
Shiverscshiv...@aristotle.net wrote: Thanks for the info and the link to the .pdf. What kind of speed are you getting out of the 5 MHz channels? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Muehleisen Sent: Thursday, December 16

Re: [WISPA] Motorola PMP 320

2010-12-17 Thread Eric Muehleisen
wrote: Thanks for the info and the link to the .pdf. What kind of speed are you getting out of the 5 MHz channels? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Muehleisen Sent: Thursday, December 16, 2010 4:05 PM To: wireless

Re: [WISPA] Motorola PMP 320

2010-12-17 Thread Eric Muehleisen
at. -Eric On 12/17/2010 9:18 AM, Carl Shivers wrote: Thanks for the info and the link to the .pdf. What kind of speed are you getting out of the 5 MHz channels? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Muehleisen Sent

Re: [WISPA] Motorola PMP 320

2010-12-16 Thread Eric Muehleisen
We have a pretty large 320 network (200 SM's) and just recently had to move to 3.5mhz channel sizes because of self-interference between sectors. The ABAB channel plan will not scale well and you will suffer high packet loss as a result. Once your cluster hits around 20-30 SM's you'll begin to

Re: [WISPA] Motorola PMP 320

2010-12-16 Thread Eric Muehleisen
wrote: Are your APs not GPS-synced? Dave On Dec 16, 2010 5:04 PM, Eric Muehleisen ericm...@gmail.com mailto:ericm...@gmail.com wrote: We have a pretty large 320 network (200 SM's) and just recently had to move to 3.5mhz channel sizes because of self-interference between sectors. The ABAB

Re: [WISPA] GPS synced systems

2010-06-14 Thread Eric Muehleisen
Redline Redmax AN-100U and UX both use GPS. I know that Airspan and Alvarions 3.65 products also use GPS. I believe anything 802.16d/e uses GPS. -Eic On 6/14/2010 11:44 AM, Rubens Kuhl wrote: RedMAX 3.5 GHz (not for use in the US) products sure use GPS. RedConnec AN-80i don't. Is the 3.65

[WISPA] OT: Needing - Dragonwave AirPair IDU

2010-04-23 Thread Eric Muehleisen
If anyone has a working Dragonwave Airpair IDU modem that they can part with, please let me know. -Eric WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Routing / Bridging / VLAN Use

2010-04-14 Thread Eric Muehleisen
We are primarily a PPPoE shop and run a bridged system for that reason. Each AP has it's own VLAN bridged back to the core. We've done this for many years without a single issue. We have different service offerings like VOIP, PPPoE, DHCP, PTPVPN and even extend our metro ethernet across our

Re: [WISPA] Routing / Bridging / VLAN Use

2010-04-14 Thread Eric Muehleisen
Approx. 3,500 wireless subs and 32 tower sites. Our wireless network has began to shrink since we've started to replace with FTTH. My only point is that I do recommend a routed network vs. bridged. But, a bridged network can work very well if designed properly. -Eric On 4/14/2010 1:24 PM,

Re: [WISPA] Routing / Bridging / VLAN Use

2010-04-14 Thread Eric Muehleisen
LOL. It's very minimal. If 20% of your BH is saturated with PPPoE broadcasts then you have something else to worry about. Typical non-unicast packet rates on an average AP is around 1 pps. If anyone is interested in broadcast packet rates on a heavily utilized bridged network, let me know,

Re: [WISPA] 3.65 GHz WiMAX deal

2010-03-18 Thread Eric Muehleisen
In the Motorola 320, the AP as 2 TX and 2 RX. The SM's have 2 TX and 1 RX. It will operate at MIMO Matrix B if optimal signal can be achieved. Otherwise it operates at MIMO A. -Eric On 3/18/2010 2:39 PM, Randy Cosby wrote: Can someone clarify, is the Motorola 320 MIMO out of the box? Is it

Re: [WISPA] 3.65 GHz WiMAX deal

2010-03-18 Thread Eric Muehleisen
The ASN is good for cellular type hand-off in the 802.16e mobility profile. It's typically very expensive. Not usually required if in a fixed application. -Eric On 3/18/2010 2:41 PM, Randy Cosby wrote: For us WiMAX neophytes, could you explain the ASN gateway and why it's on your list of

Re: [WISPA] 3.65 GHz WiMAX deal

2010-03-18 Thread Eric Muehleisen
You are correct. Thanks for the clarification. -Eric On 3/18/2010 2:58 PM, Gino Villarini wrote: Sm has 2 rx 1 tx Sent from my Motorola Startac... On Mar 18, 2010, at 3:55 PM, Eric Muehleisenericm...@gmail.com wrote: In the Motorola 320, the AP as 2 TX and 2 RX. The SM's have 2 TX

Re: [WISPA] 3.65 GHz WiMAX deal

2010-03-18 Thread Eric Muehleisen
Correct. No ASN. Service flows and classifications are set directly in the AP. Radius is built into the SM. It's fully L3 routeable. Currently no L2 functionality. -Eric On 3/18/2010 3:11 PM, Randy Cosby wrote: Thanks. Now, on the Motorola 320, for example, the ASN gateway is not part of

[WISPA] 700mhz Wimax

2010-03-10 Thread Eric Muehleisen
Aside from Airspan, can any suggest a manufacturer that produces 700mhz Wimax equipment? We own several licenses. Trolling salesmen and vendors, feel free to contact me offlist. -Eric WISPA Wants You! Join today!

Re: [WISPA] Motorola telemarketing call

2010-02-23 Thread Eric Muehleisen
It is currently in Beta. I would expect it to start shipping around the first part of April. -Eric On 2/23/2010 9:03 AM, Jeremie Chism wrote: I guess motorola is calling wisps about there new 3650 gear which the representative said will be available in the next few weeks. Sent from my

Re: [WISPA] Anyone use this: Motorola Point-to-Multipoint CAP 320 Access Point

2010-02-20 Thread Eric Muehleisen
It is still in beta testing. Product is slated for shipping in early April. -Eric On 2/20/2010 11:30 AM, Scott Carullo wrote: Thanks... Scott Carullo Brevard Wireless 321-205-1100 x102 WISPA Wants You!

[WISPA] EBS Licensing

2010-01-21 Thread Eric Muehleisen
I need some information as to how Clear (Clearwire) is fulfilling their subleasing requirements in the EBS band. The rules state the following: 1. There must be a minimum of 20 hours per 6 MHz channel per week of educational use of EBS spectrum. 2. For analog facilities, EBS licensees must

Re: [WISPA] EBS Licensing

2010-01-21 Thread Eric Muehleisen
]on Behalf Of Eric Muehleisen Sent: Thursday, January 21, 2010 5:03 PM To: WISPA General List Subject: [WISPA] EBS Licensing I need some information as to how Clear (Clearwire) is fulfilling their subleasing requirements in the EBS band. The rules state the following: 1. There must

Re: [WISPA] EBS Licensing

2010-01-21 Thread Eric Muehleisen
] On Behalf Of Eric Muehleisen Sent: Thursday, January 21, 2010 5:03 PM To: WISPA General List Subject: [WISPA] EBS Licensing I need some information as to how Clear (Clearwire) is fulfilling their subleasing requirements in the EBS band. The rules state the following: 1. There must

Re: [WISPA] DHCP options

2009-10-08 Thread Eric Muehleisen
This has DHCP option 82 written all over it. It's very popular in a DOCSIS environment. I assume the Alvarion equipment doesn't support option 82. If this is the case you could do it via an option 82 capable switch. The switch could tell you what port, MAC, IP, etc. Good luck. -Eric Cameron

Re: [WISPA] Defective Microtik

2009-08-04 Thread Eric Muehleisen
Scott, So do you solder or ground the shielded end at any point or just ground the drain wire only? -Eric Scott Reed wrote: From way back when I was an electrical engineering student, ground one end. Or ground every 10 to 20 feet along the run. Otherwise you have the potential for a

[WISPA] Redline AN80i latest firmware

2009-08-03 Thread Eric Muehleisen
If you have the latest please send offlist with documentation if you have it. Thanks, -Eric WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Default a AN80i?

2009-07-27 Thread Eric Muehleisen
It certainly works. I've done it numerous times. However, it is a pain and a bit awkwardly implemented IMO. -Eric Josh Luthman wrote: Joe, If you wouldn't mind please share how easy/difficult this is. For me it seems like a pain due to timing but I would trust your word much more then my

Re: [WISPA] Default a AN80i?

2009-07-26 Thread Eric Muehleisen
http://supportcenteronline.com/ics/support/KBAnswer.asp?questionID=377fieldOffset=14hitOffset=709+20+ Joe Laura wrote: Does anyone know how to default an AN80i Redline? Joe Laura - Original Message -

Re: [WISPA] Default a AN80i?

2009-07-26 Thread Eric Muehleisen
portal session has expired - Original Message - From: Eric Muehleisen ericm...@gmail.com To: WISPA General List wireless@wispa.org Sent: Sunday, July 26, 2009 9:17 PM Subject: Re: [WISPA] Default a AN80i? http://supportcenteronline.com/ics/support/KBAnswer.asp?questionID

Re: [WISPA] radio mobile

2009-03-08 Thread Eric Muehleisen
FYI...If your using RadioMobile as a path calculator for PtP links, the antenna pattern is irrelevant. Using an omni antenna for both TX and RX will give you accurate numbers. -Eric Brian Rohrbacher wrote: So, I have been working on radio mobile for the past couple days. I need to make my

Re: [WISPA] radio mobile

2009-03-03 Thread Eric Muehleisen
Get your SRTM data from here... ftp://e0srp01u.ecs.nasa.gov/srtm/version1/United_States_1arcsec/1arcsec/ -Eric Marlon K. Schafer wrote: Sold! I tried to download the terrain data, but I got the NED instead of the srtm. I don't know which data set to get. WHAT a POS system this is! Also,

Re: [WISPA] Anybody use Aperto for 3.65GHz? I'd like to know what you think.

2009-02-21 Thread Eric Muehleisen
Tranzeo now offers a low cost 3.65 basestation with CPE that is compatible with Redline's Redmax basestation and CPE. -Eric Pat O'Connor wrote: We're looking to deploy 3.65GHz this year in a couple of different locations because of interference issues. So far they have the most compelling

[WISPA] OT: Redline AN50e QoS

2009-02-09 Thread Eric Muehleisen
Does anybody know if Redline's AN50e support any low-latency modes, Diffserv or any other QoS prioritization for VOIP applications? The latest firmware I have (1.36.046) does not have these features. -Eric WISPA

Re: [WISPA] [Motorola II] OT: Redline AN50e QoS

2009-02-09 Thread Eric Muehleisen
Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer On Mon, Feb 9, 2009 at 5:32 PM, Eric Muehleisen ericm...@gmail.com wrote: Does anybody know if Redline's AN50e support

Re: [WISPA] [Motorola II] OT: Redline AN50e QoS

2009-02-09 Thread Eric Muehleisen
UNIX are condemned to reinvent it, poorly. --- Henry Spencer On Mon, Feb 9, 2009 at 6:02 PM, Eric Muehleisen ericm...@gmail.com mailto:ericm...@gmail.com wrote: I assumed so. I know that Motorola/Orthogon has this feature set. It might be useful on those congested backhaul links where

Re: [WISPA] Using PPPoE DHCP simultaneously?

2009-01-27 Thread Eric Muehleisen
Bridging DHCP and PPPoE on the same physical LAN segment is not a good idea, but can be done. I've done this as a quick way to convert PPPoE subs to DHCP and visa-versa. Use VLAN's to separate the two if you can. -Eric Doug Ratcliffe wrote: I know it's considered bad practice to do this, but

Re: [WISPA] [Motorola II] High CRC errors on RedMax?

2008-12-15 Thread Eric Muehleisen
I've seen this when there is a bad SU registered. CRC's climb out of control. I have not seen this on multiple SU's before. It's typically singled out. Have you rebooted the AP recently. I'm running the latest beta code and have experience a couple of lockups over the past couple of months.

Re: [WISPA] [Motorola II] High CRC errors on RedMax?

2008-12-15 Thread Eric Muehleisen
2.1.8.FCCMade on: Sep 4 2008, 14:15:50 Also, we are using AN-100UX's not U's. -Eric John McDowell wrote: What code are you on? We're running 2.0.26.FCC On Mon, Dec 15, 2008 at 12:02 PM, Eric Muehleisen ericm...@gmail.com mailto:ericm...@gmail.com wrote: I've seen this when

Re: [WISPA] [Motorola II] Book1.xls

2008-12-07 Thread Eric Muehleisen
Nex-Tech participated in this poll and we are around 4000 subs. 90% Canopy shop. -Eric Chuck McCown - 3 wrote: How far do you reckon that folks have stretched their numbers? I'll be happy to put my name by my number. - Original Message - From: Mac Dearman [EMAIL PROTECTED] To:

Re: [WISPA] 3.65Ghz Parabolic Dish

2008-11-14 Thread Eric Muehleisen
Try these http://www.stelladoradus.com/3.2-3.8.3.5.ghz.parabolic.antennas.php http://www.hyperlinktech.com/productfamily.aspx?id=173 http://www.tiltek.com/products/newantennaSeries.php?range=3400-3700range2=series=TA-3400Antenna_Type= http://www.mtiwe.com/tree.aspx?parent=18id=41type=11 -Eric

Re: [WISPA] wierd ap issue - ap thinks default plug is in

2008-10-18 Thread Eric Muehleisen
I've seen this happen in the past. Do you have a sync cable plugged into the sync port? Have you tried upgrading firmware? -Eric WISP wrote: I had to reboot one of my towers tonight and when the access point came back with Default plug overrides configured parameters Since this P10 AP has

Re: [WISPA] deliberant/ligowave

2008-10-08 Thread Eric Muehleisen
Put a LigoPTP on a public IP and I'll whip us some quick cacti templates. -Eric Matt Jenkins wrote: You current software for the LigoPTP radios uses standard SNMP OIDs for traffic interfaces. At least it does in Cacti. I would really like to see Cacti templates for things like db, snr, etc.

Re: [WISPA] deliberant/ligowave

2008-10-08 Thread Eric Muehleisen
: Eric, Can you post them when you are done? --- On Wed, 10/8/08, Eric Muehleisen [EMAIL PROTECTED] wrote: From: Eric Muehleisen [EMAIL PROTECTED] Subject: Re: [WISPA] deliberant/ligowave To: WISPA General List wireless@wispa.org Date: Wednesday, October 8, 2008, 1:30 PM Put a LigoPTP

Re: [WISPA] Redline Wimax Rough Pricing

2008-09-10 Thread Eric Muehleisen
Roughly $7-8k for basestation and $300 per SU if ordered by the pallet (72). If you have the budget go for the AN-100UX. It will give you much needed power and help you reach EIRP. This would also make it possible to use the SU-I's (indoor). -Eric [EMAIL PROTECTED] wrote: Anyone have any

Re: [WISPA] Redline Wimax Rough Pricing

2008-09-10 Thread Eric Muehleisen
:38 PM, Eric Muehleisen [EMAIL PROTECTED]wrote: Roughly $7-8k for basestation and $300 per SU if ordered by the pallet (72). If you have the budget go for the AN-100UX. It will give you much needed power and help you reach EIRP. This would also make it possible to use the SU-I's (indoor

Re: [WISPA] quality rugged, outdoor-friendly switches?

2008-09-07 Thread Eric Muehleisen
Cisco 2955 - http://cisco.com/en/US/products/ps6738/index.html Moxa EDS series - http://www.moxa.com/product/Managed_Redundant_Switches.htm Garrettcom Magnum - http://www.garrettcom.com/mp62.htm to name a few -Eric Rogelio wrote: I've got tons of various Bridgewave devices that I will need to

Re: [WISPA] 3.65 SUO not passing traffic

2008-09-07 Thread Eric Muehleisen
Gino, I'd consult the vendor you got your equipment from. They should be able to help you get your deployment off the ground. If you'd like I could provide (offline) you with some screenshots of a basic setup. -Eric Gino Villarini wrote: I must have something setup wrong here... SUO

Re: [WISPA] 3.65 SUO no layer 2 trafic

2008-09-03 Thread Eric Muehleisen
Gino, I'm sending you a note offlist. -Eric Gino Villarini wrote: Aside from the quick setup guide, any other parameter needs to be configured to pass data trough the SUO units? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145

Re: [WISPA] 3.65 SUO initial config

2008-08-30 Thread Eric Muehleisen
John runs the Redmax AN-100U which is limited to 23dbm transmit power. However, the AN-100UX is limited to 36dbm. With a sector antenna at the base station running 27-28dbm transmit power you could easily do 2+ miles NLOS with 64QAM/16QAM which would give you about 11mb/s down and 4mb/s up @

Re: [WISPA] 3.65 SUO initial config

2008-08-30 Thread Eric Muehleisen
could get with line of site? Travis Microserv Eric Muehleisen wrote: John runs the Redmax AN-100U which is limited to 23dbm transmit power. However, the AN-100UX is limited to 36dbm. With a sector antenna at the base station running 27-28dbm transmit power you could easily do 2+ miles NLOS

Re: [WISPA] Redline AN100 Latest software?

2008-08-29 Thread Eric Muehleisen
Gino, I'm sending you 1.36.046 offlist. -Eric Gino Villarini wrote: I have 1.2.24 on my AN100 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145

Re: [WISPA] Redline indoor subscriber

2008-08-01 Thread Eric Muehleisen
Performance was poor in our testing. the SU-I has only 8dbi gain on it's directional antenna (back of unit). It would obviously need to be window mounted for it to work. We tested on an interior room not even .25miles out and could not link up. -Eric Gino Villarini wrote: Please share

Re: [WISPA] 3.65 Redline SUA buzzer command?

2008-07-23 Thread Eric Muehleisen
ON: set boardConfig Buzzer 1 OFF: set boardConfig Buzzer 0 They are not very accurate. I would still recommend that you have someone on the remote end giving you a verbal. -Eric John McDowell wrote: yeah, i tried it to...no workie I look through some of the manuals and see On Wed, Jul

Re: [WISPA] 3.650 Wimax in the field

2008-07-22 Thread Eric Muehleisen
are not the intended recipient, please contact the sender and delete all copies. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Muehleisen Sent: Tuesday, July 22, 2008 12:06 AM To: WISPA General List Subject: Re: [WISPA] 3.650 Wimax in the field Redmax 100U

Re: [WISPA] [Motorola II] RedMax Timing Module

2008-07-15 Thread Eric Muehleisen
Are you setting up sectors in different parts of a town or is this for one site? There are 3 non-overlapping channels you can use, but adding a 4th sector may require timing unless you can get away with the proper channel arrangements and/or polarizations. -Eric John McDowell wrote: Hey

Re: [WISPA] [Motorola II] RedMax Timing Module

2008-07-15 Thread Eric Muehleisen
You can sync the two sectors together using a cable then use the other non-overlapping channel on the omni. Obviously, if you add another sector you'll need a timing device. -Eric John McDowell wrote: Omni...9 miles away from 2 sectors. On Tue, Jul 15, 2008 at 3:03 PM, Eric Muehleisen

Re: [WISPA] Open Range

2008-04-10 Thread Eric Muehleisen
Bob, Can you please share more info either on-list or off-list please? -Eric M. bcochran wrote: Chris, Yes I know all about this organization. Bob WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] wireless monitoring with rrdtool / Cacti

2008-03-30 Thread Eric Muehleisen
You name it...we graph it. I've been using cacti to graph our Canopy, Trango, Airspan, Dragonwave, Mikrotik, APC...etc. Jitter, Power, SNR, Ping, CPU utilization, PPS. Basically anything that has an SNMP OID. -Eric Rogelio wrote: Has anyone found Cacti (or any other rrdtools) particularly

Re: [WISPA] pppoe server, Redback capability of other solutions?

2008-02-07 Thread Eric Muehleisen
Redback is untouchable in terms of PPPoE aggregation. Cisco is really the only other Router out there that is of Redback's caliber. We currently terminate close to 15,000 subscribers using a Redback SE 400. Attached is our current CPU usage. -Eric rabbtux rabbtux wrote: All I'm in the

Re: [WISPA] 3.65 needs more lobbying (was Re: One Ring Networks ToRollout New WiMAX Service)

2008-01-25 Thread Eric Muehleisen
affiliated with Airspan or Redline. We are an Internet Service Provider serving the greater Midwestern Kansas. Eric Muehleisen Sr. Internet Technology Specialist Nex-Tech - Lightning Jack 785.625.7070 office 785.621.2980 voip George Rogato wrote: Only thing I want to know is the price range

Re: [WISPA] 3.65 needs more lobbying (was Re: One Ring Networks ToRollout New WiMAX Service)

2008-01-25 Thread Eric Muehleisen
We just completed a demo of Airspan's Hipermax in Emporia, Kansas yesterday. Stutler Technologies hosted us as they are one of the largest systems integrators for Airspan. I must say that I was very impressed with it's NLOS performance. We tested both the indoor self install and the outdoor ST

Re: [WISPA] IP Database?

2007-12-06 Thread Eric Muehleisen
IPplan http://iptrack.sourceforge.net/ Works quite well. PHP based. -Eric M. Dennis Burgess wrote: Just wondering if anyone has any recommendations of IP databases? I have a customer that is interested in being able to track all of the subnets etc, but needs a easy way of doing it.

Re: [WISPA] Vuze / Comcast / Peer to Peer / FCC

2007-11-23 Thread Eric Muehleisen
I don't think he meant completely lock it up. I think he mean that a P2P sub seeding a torrent causes this. A good torrent is enough to cause major connectivity issues on 4 meg Canopy 900 AP. -Eric Eric Rogers wrote: Does your 900 AP have a public IP? There is a known issue with HTTP

Re: [WISPA] Standard Motorola 5.8 GHz Channel Frequencies

2007-09-13 Thread Eric Muehleisen
All flavors of Canopy support 5mhz steps. Centers are 5735, 5740, 5745 and so on. I think they are 10-12 mhz wide...i could be wrong on that. -Eric Jack Unger wrote: Could someone advise me what the Motorola Canopy 5.7 to 5.8 GHz standard channel center frequencies are? Also, how

Re: [WISPA] You're all going to lose ( I hope not)

2007-09-09 Thread Eric Muehleisen
Here in Midwest Kansas the competition is surprisingly tough. The ATT's out there continue to escalate speeds and drop pricing...however, we continue to kill the competition with our local flavor of services. People here in the rural settings tend to buy into the we are the local guys more

Re: [WISPA] redline

2007-09-06 Thread Eric Muehleisen
The maximum transmit power allowed on my units is 18dBm. The receive sensitivity all depends on what UBR your currently at. When I was aiming them I was able to achieve 54mb at -85 ish. This is with 1ft panels going about 1.5 miles. -Eric Travis Johnson wrote: Hi, Does anyone know off the

Re: [WISPA] See what we put up with!

2007-08-22 Thread Eric Muehleisen
Except if your a WISP! Mac Dearman wrote: Everyone takes a nap on Sunday :-) Mac -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Reed Sent: Tuesday, August 21, 2007 4:35 PM To: WISPA General List Subject: Re: [WISPA] See what we put up

Re: [WISPA] Trango VOIP

2007-07-02 Thread Eric Muehleisen
Doug, I will second Forrest's comments. We have been running VOIP on Canopy for several years now will great success. The key is setting the high priority queues and DiffServ settings. We also tagged VOIP traffic in a high priority DHCP VLAN. We've found that PPPoE encapsulation really

Re: [WISPA] Trango VOIP

2007-07-02 Thread Eric Muehleisen
trunking would allow more VOIP calls over the same data bandwidth due to packet size / aggregation? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Muehleisen Sent: Monday, July 02, 2007 3:05 PM To: WISPA General List Subject: Re: [WISPA] Trango

Re: [WISPA] Low cost generator

2007-06-30 Thread Eric Muehleisen
Travis, How do you go about tweaking a UPS? We use APC 750's at most small tower sites. During the event of a power outage we use 1000watt generators but as you said...the UPS just shuts off and on, repeatedly. -Eric Travis Johnson wrote: Brad, You can adjust the sensitivity of the APC

[WISPA] test

2007-06-21 Thread Eric Muehleisen
test -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] Ethernet Extenders

2007-06-05 Thread Eric Muehleisen
Can anyone offer any experiences with ethernet extenders? We are looking for an alternative to wireless backhaul in one of our ILEC towns. We own the copper and are looking to go up to 1 mile. We have looked at VDSL as an alternative also. This particular application requires 20mb/s

Re: [WISPA] Licensing my BH Links

2007-05-15 Thread Eric Muehleisen
I use CTI Dragonwave. They will do the path analysis together and determine which frequency will give you the best performance based on distance, rain zones, etc. The path plus licensing cost is $2500. Contact Boun Senekham (bsenekham(at)cticonnect.com (773) 667-4585 x 840

Re: [WISPA] Mirrored Switch

2007-05-01 Thread Eric Muehleisen
Try the Zyxel ES-2008 series. It will do exactly what you need for a sub $200 price tag. -Eric Matt wrote: Does anyone reccommend a good switch that supports this and is rack mount? Hopefully available at newegg.com. Putting together a Linux server is easy but my luck a good switch might be

Re: [WISPA] Network Monitoring and Graphing

2007-04-25 Thread Eric Muehleisen
Look at CACTI. It has a steep learning curve, but is open source and there is a ton of help in it's forums. We use it to monitor around 4,000 wireless subscribersincluding access points, switches, routers, mail servers, etc. It also has an alert/notification plug-in available that will

Re: [WISPA] PPPoE The good, the bad and the ugly please

2007-04-09 Thread Eric Muehleisen
Scriv, We use Redback for PPPoE authentication to around 15,000 subs. It's a breeze for customer accounting and really simplifies routing static IP's, subnets and private contexts. We are also in the VOIP arena where PPPoE has failed us. PPPoE encapsulation will strip most of your QoS. Keep

Re: [WISPA] PPPoE The good, the bad and the ugly please

2007-04-09 Thread Eric Muehleisen
Once you encapsulate VoIP in PPPoE then QoS is unavailable to any device in the middle; which is where most of the bottlenecks in bandwidth are. So you gain something and lose something more important. We have moved all of our VOIP subscribers to DHCP w/ VLAN priorities that are mapped to

Re: [WISPA] PPPoE The good, the bad and the ugly please

2007-04-09 Thread Eric Muehleisen
You could, but I think your QoS would get very crippled. Each device between your ATA/PC and core router/softswitch would need to be able to read your QoS markings within the PPPoE encapsulation. You simply cannot prioritize tagged packets within PPPoE encapsulation end-to-end very

Re: [WISPA] Service Offerings - Competing

2007-02-04 Thread Eric Muehleisen
We have a stipulation in our AUP when the customer signs the initial contract that prohibits maximizing their connection for a sustained period of time. We enforce a 3 strike rule then kick 'em off-line if violated. If they choose to go with another provider then good riddance. Let the

Re: [WISPA] remote power

2006-12-12 Thread Eric Muehleisen
http://www.digital-loggers.com/EPC.html http://www.hw-group.com/products/ip_watchdog/index_lite_en.html http://www.surpluscomputers.com/store/main.aspx?p=ItemDetailitem=NET10332 http://dataprobe.com/products/power/index.html -Eric chris cooper wrote: Can anyone share what they use for remote

Re: [WISPA] vendor specs

2006-09-25 Thread Eric Muehleisen
: 650.641.1243 Patrick, I would be very interested in obtaining this doc. My wireless department is comprised of roughly 90% Canopy gear (4,000 subs), which we are very happy with. However, we are always looking for greener pastures. Thank you, Eric Muehleisen Internet Technology Specialist Nex-Tech

[WISPA] OT: Dragonwave Cacti

2006-08-05 Thread Eric Muehleisen
Way off topic...but, does anyone who uses Dragonwave gear have any Cacti templates available? -Eric -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] 18Ghz through power lines?

2006-06-27 Thread Eric Muehleisen
Getting ready to deploy 18Ghz DragonWave links. However, in the middle of my path is a set of 4 power lines (no transformer). Has anyone had any experience with this? Here is my path: DragonWave master - - - - -1/4 mile / power lines - - - - - 3 miles DragonWave slave -Eric -- WISPA

[WISPA] Applying for Licensed Spectrum

2006-03-08 Thread Eric Muehleisen
How does one go about getting a license for deploying PTP backhaul links in the 11ghz to 18ghz band? -Eric -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/