Re: [WISPA] Mimosa B5-160 v UBNT AF5-US Chart (working)

2014-08-22 Thread Matt Jenkins
I wear a size 15 shoe. I really hate shopping for shoes. Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 08/07/2014 09:25 AM, Patrick Leary wrote: With a size 15 shoe, it's a bit like a sasquatch sighting, only more rare... Patrick Leary M 727.501.3735 -Original

[WISPA] Mimosa questions: TX/RX and Spatial Diversity.

2014-08-22 Thread Matt Jenkins
Currently we deploy a lot of PTP600 and PTP650 links. The primary reason, is the ability to have split TX/RX frequencies. Due to competitors, we cannot always find the same clear channel on two sides of a link. Does Mimosa support this? Also, we deploy in locations where the antennas move,

Re: [WISPA] Mimosa Networks New product released

2014-08-22 Thread Matt Jenkins
UDP, 1500bytes, no retransmits? Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 08/05/2014 02:33 PM, Josh Reynolds wrote: If you use their cloud based link planner, it will tell you the answer to your first question :P 2x80MHz - 975Mbps 2x40MHz - 487.5Mbps 2x20MHz -

Re: [WISPA] Ethernet over cat3 options

2014-07-31 Thread Matt Jenkins
http://www.netsys-direct.com/Ethernet_Extenders_s/1814.htm Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 07/29/2014 03:59 PM, Brett Woollum wrote: We've used the StarTech ones with a lot of success. They've worked well for us in cases where running a new Ethernet line would

Re: [WISPA] mikrotik - bridge - van - eoip questions

2014-07-02 Thread Matt Jenkins
Think of the bridge as a switch. You add ports (to the bridge) that you want to be part of your switch. \ So you can have untagged traffic on ether5 and ether7 send data to vlan20 on ether1 and vlan20 on ether9. You put all of those in a bridge. You cannot add a bridge to a bridge. I suggest

Re: [WISPA] Do i have enough separation

2014-03-14 Thread Matt Jenkins
I require 3' of physical separation between all 5ghz ubnt products and any other 5ghz product. Any closer and they usually cause interference issues. Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 03/14/2014 12:11 PM, heith petersen wrote: So I had my new tech go on this

Re: [WISPA] Bandwidth usage

2014-02-18 Thread Matt Jenkins
Bill for overusage. Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 02/18/2014 11:08 AM, ~NGL~ wrote: So how do you stop torrents? NGL *From:* Josh Reynolds mailto:j...@spitwspots.com *Sent:* Tuesday, February 18, 2014 11:03 AM *To:* wireless@wispa.org

Re: [WISPA] Bandwidth usage

2014-02-18 Thread Matt Jenkins
My torrents are encrypted over port 443 in a tunnel to a registered tracker. But if they are using plain ol' piratebay or equivalent a box like that will work fine to block it. Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 02/18/2014 11:15 AM, Josh Reynolds wrote: We do L7

Re: [WISPA] Recommend Managed Switch

2014-02-12 Thread Matt Jenkins
Do you know if these support port isolation or Cisco's protected port? Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 02/05/2014 11:52 AM, Josh Reynolds wrote: Not sure if it's outdoor temp rated, but for the price of an HP 1810-24G v2 (around $250), you really can't go

Re: [WISPA] Completed Video of Tower work and quadcopter

2014-02-12 Thread Matt Jenkins
Is the background music Hocico? Matthew Jenkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 01/29/2014 09:14 AM, Gino Villarini wrote: Final edited version: http://www.youtube.com/watch?v=1spQgL3bS_Y Gino A. Villarini g...@aeronetpr.com mailto:g...@aeronetpr.com Aeronet Wireless

Re: [WISPA] Advice Needed on 200 Mbps FDX Radios

2014-01-08 Thread Matt Jenkins
Food for thought: If you want reliable, pick any two: Unlicensed, 11 miles, 200mbps FDX I suggest you look at 11ghz licensed. SAF or SIAE equipment can help do this for under $10k total. If you have to be unlicensed your going to need to find out what your 5725-5850mhz spectrum looks like on

Re: [WISPA] Solution to Regulate Video Streaming?

2014-01-02 Thread Matt Jenkins
To regulate a specific application (Video Streaming) you will need a product like Procera. On 12/31/2013 10:55 AM, Joey Craig wrote: My employer is looking for a solution to monitor, regulate and bill for video streaming to the customer if he/she goes over a predetermined amount per month.

Re: [WISPA] looking to purchasing bandwidth

2014-01-02 Thread Matt Jenkins
One good trick is to get a fiber circuit from a cable company to a datacenter they already connect to. Then buy bandwidth at the data center. This is how we get bandwidth. You should also call this guy. He can provide options from a bunch of different providers. Patrick Fidell National

Re: [WISPA] Solution to Regulate Video Streaming?

2014-01-02 Thread Matt Jenkins
Solutions http://www.ics-il.com *From: *Matt Jenkins m...@smarterbroadband.net *To: *joey craig joey.cr...@firenet1.com, WISPA General List wireless@wispa.org *Sent: *Thursday, January 2, 2014 1:00:49 PM *Subject: *Re

Re: [WISPA] 2.4ghz AP interfering with 2-way radio

2013-11-06 Thread Matt Jenkins
We had this happen on a tower and it turned out we left a single loop of cable at the top. This loop was about the right size to cause noise for the two-way. Once the loop was removed and all cables as straight as possible the problem went away. Matthew Jenkins SmarterBroadband m...@sbbinc.net

Re: [WISPA] ATT Contact

2013-10-14 Thread Matt Jenkins
You could try calling ACC. My contact is: Patrick Fidell National Account Executive/Team Lead Office: 310-697-0287 - Matt On 10/14/2013 08:48 AM, Roger Howard wrote: Does anyone have a contact for wholesale sales within ATT for fiber circuits? Looking on http://wholesale.att.com/ I see no

[WISPA] Exalt ExtremeAir Special

2013-08-22 Thread Matt Jenkins
If anyone has asked Exalt for a quote, can you share what price they are offering? Original Message Subject: [WISPA Approved Ad] Announcing the Exalt ExtremeAir Promotion Exclusively for US and Canada WISPs Date: Wed, 21 Aug 2013 16:00:56 -0700 From: Joe Schraml

Re: [WISPA] Recommendations for Ubiquiti 3.65 site

2013-07-31 Thread Matt Jenkins
I agree. We used to have a bunch of 3.65 Ubnt deployed in PTMP. I have removed almost all of it after being unable to maintain stable performance. If you are going to use it, keep connections pure line of sight and keep all AMQ and Capacity above 90%. Also don't install anyone over -66dbm

[WISPA] OT: Help with Units and Polygon in Google Earth

2013-05-24 Thread Matt Jenkins
I have a kml with all my customers and a kml with a polygon. I need to produce one KML with both the polygon and only the customers who are in that polygon. Does anyone have a simple way to do this? ___ Wireless mailing list Wireless@wispa.org

Re: [WISPA] High Capacity AP alternatives?

2013-01-28 Thread Matt Jenkins
ics-il.com - Original Message - From: "Matt Jenkins" m...@smarterbroadband.net To: us...@wug.cc, "WISPA General List" wireless@wispa.org Sent: Friday, January 25, 2013 5:36:26 PM Sub

[WISPA] High Capacity AP alternatives?

2013-01-25 Thread Matt Jenkins
Besides Cambium, Mikrotik, Ubnt and other WiFi products, is anyone successfully deploying something else to service both residential and business customers? Thanks, - Matt ___ Wireless mailing list Wireless@wispa.org

[WISPA] Sky Pilot and EOIP?

2012-11-28 Thread Matt Jenkins
I am working with another operator in my area. He wants me to provide connectivity for one of his Access Gateways. I can get a link to his remote site and his main office, my plan is to build an EOIP tunnel for him. Has anyone ever used an EOIP tunnel to connect a Gateway back to the

Re: [WISPA] OT: Flowchart

2012-11-07 Thread Matt Jenkins
GHLKFDSAA!!! On 11/07/2012 07:53 AM, Mike Hammett wrote: Here is a flowchart that sometimes applies to this list: http://flowingdata.com/2011/08/05/flowchart-should-you-argue-on-the-internet/ - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com

Re: [WISPA] [off topic] Anything better than Paypal?

2012-10-17 Thread Matt Jenkins
Not sure if this works in Europe. https://squareup.com/ On 10/17/2012 07:55 AM, Paolo Di Francesco wrote: Hi Mike I tried for a couple of months to work on the setup with them, then I guess they gave up :( Do you advice them? If so I will

Re: [WISPA] Ubiquiti Radios as routers

2012-10-11 Thread Matt Jenkins
I did this for the first time last week. It seems to work fine. On 10/11/2012 12:46 PM, Arthur Stephens wrote: We currently use Ubiquitiradios in bridge mode and assign a ip address to the customers router. He have heard other wisp are using

Re: [WISPA] WISPA's recent

2012-10-02 Thread Matt Jenkins
*applause* On 09/23/2012 11:22 PM, Jack Unger wrote: Section 706 of the Telecommunications Act of 1996, as amended (1996 Act), requires the FCC to determine and report annually on whether advanced telecommunications

[WISPA] Exalt ExploreAIR PoE and SFP together?

2012-09-27 Thread Matt Jenkins
I am looking at the ExploreAIR LR 11ghz for a project. Can anyone confirm if you can use PoE for power and out of band management and then use SFP for actual Layer2 data? ___ Wireless mailing list Wireless@wispa.org

Re: [WISPA] Exalt ExploreAIR PoE and SFP together?

2012-09-27 Thread Matt Jenkins
the POE version I believe you are limited to copper interface at the POE module. I will see if I can dig up some info and send to you off list. -B- On 9/27/2012 11:39 AM, Matt Jenkins wrote: I am looking at the ExploreAIR LR 11ghz for a project. Can anyone confirm if you can use PoE

Re: [WISPA] What's this 900mhz Interference look like?

2012-08-31 Thread Matt Jenkins
We have one around here too. IIRC they can do up to 50 Watts tx power too right? On 08/25/2012 07:39 AM, Jason Bailey wrote: Chris,I am a ham and wisp down in Jackson. I know all to

Re: [WISPA] Internet Speed test..are they inaccurate with wireless?

2012-08-23 Thread Matt Jenkins
much bandwidth on average are you seeing to your speed test servers? We're considering becoming a speedtest.net host, but are concerned about the amount of bandwidth generated by users outside our network. -- Blake Covarrubias On Aug 22, 2012, at 9:54 AM, Matt Jenkins m...@smarterbroadband.net wrote

Re: [WISPA] Internet Speed test..are they inaccurate with wireless?

2012-08-22 Thread Matt Jenkins
We setup a speedtest server. So when customers connect to speedtest.net they reach our local server. The test data never leaves our network. On 08/21/2012 12:27 PM, Joey Craig wrote:

Re: [WISPA] Internet Speed test..are they inaccurate with wireless?

2012-08-22 Thread Matt Jenkins
http://www.speedtest.net/mini.php On 08/21/2012 12:22 PM, Bret Clark wrote: We mostly deal with business customer and guarantee bandwidth to customers. We validate the bandwidth using IPERF from a Linux server off of our

Re: [WISPA] 100Mbps+ BH Solutions.

2012-03-16 Thread Matt Jenkins
I assume its probably because wifi chips wont meet the spectrum masks required. Also 24ghz requires a transmit channel and a receive channel be many hundred mhz apart. On 03/16/2012 10:35 AM, Kyle Duren wrote: Along those same lines, what is keeping them from

Re: [WISPA] Solution for high bandwidth semi-mobile link

2012-01-25 Thread Matt Jenkins
+1. This would be my suggestion too. On 01/25/2012 09:06 AM, Gino Villarini wrote: Ptp link to the nearest point as you stated, them a PTP600 link using a 60 deg dual pol sector on the Master

Re: [WISPA] Mikrotik Question..

2012-01-23 Thread Matt Jenkins
I think you can go into connections in the firewall and delete the appropriate connection for the winbox user. That should drop them. On 01/23/2012 10:01 AM, Faisal Imtiaz wrote: Thanks.. I was hoping that there would be a better way ... something like clear connection .type command..

Re: [WISPA] Bandwidth Monitoring and Presentation

2012-01-06 Thread Matt Jenkins
: On Wed, 2011-12-28 at 13:51 -0800, Matt Jenkins wrote: I put together a very simple page: http://usage.sbbnet.com Currently it takes an IP address but could easily take a customer ID number instead. http://usage.sbbnet.com/customer.php?customer=173.195.182.210curDate=1325107879 http

Re: [WISPA] Bandwidth Monitoring and Presentation

2011-12-28 Thread Matt Jenkins
I put together a very simple page: http://usage.sbbnet.com Currently it takes an IP address but could easily take a customer ID number instead. http://usage.sbbnet.com/customer.php?customer=173.195.182.210curDate=1325107879

Re: [WISPA] 3650 MHz permission letters?

2011-12-28 Thread Matt Jenkins
a...@afmug.com. Cambium (Canopy) posts on this list. On 12/22/2011 03:30 PM, John Buwa wrote: Is there a good canopy list? John Buwa Michiana Wireless,Inc  574-233-7170 Sent from my iPhone

Re: [WISPA] I'm new, I hope this is the right list...

2011-11-29 Thread Matt Jenkins
Yes. On 11/28/2011 05:18 PM, Rich _ wrote: Then, most WISP operations use unlicensed freqencies? WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] I'm new, I hope this is the right list...

2011-11-28 Thread Matt Jenkins
Proprietary equipment in most cases. They also use licensed frequency which they pay a premium for. On 11/28/2011 04:51 PM, Rich _ wrote: What type of equipment does Clear/OpenRange use that allows a connection using one of those 1"x3" USB things?

Re: [WISPA] Bandwidth shaping and QOS

2011-11-02 Thread Matt Jenkins
Even I finally went the Mikrotik route. Use the Tik to set max speeds. But I use the CPE to set sustained and burst amounts. This prevents bursting to the max speed of the AP. Gives us better control over the plans we provide. Add in a backend radius server for the Tik and CPE and you can

Re: [WISPA] Fiber On Air (gigabit wireless)

2011-10-26 Thread Matt Jenkins
Where is this link going to be? (City/State?) On 10/26/2011 09:02 AM, Jawad A Hai wrote: 60 GHZ product (AR60X) is max 2.5 KM only. I just browsed their website. -- From: Josh Luthmanj...@imaginenetworksllc.com Sent: Wednesday, October 26,

Re: [WISPA] Antenna Mounts

2011-10-12 Thread Matt Jenkins
To mount a Andrew 3' dish with the included Andrew mounting kit you need the following: 1x about a 4' length of 4.5inch outer diameter schedule 20 or 40 pipe. 2x http://wbmfg.com/products.cfm?PID=33 There are other mounting kits for the andrew antenna's,

Re: [WISPA] Rack Mount POE Injector

2011-10-10 Thread Matt Jenkins
We have been having issues with the ubiquiti converters failing and even killing radios. On 09/15/2011 04:49 PM, Faisal Imtiaz wrote: U can try something like this...

Re: [WISPA] Rack Mount POE Injector

2011-10-10 Thread Matt Jenkins
/ Regards. Faisal Imtiaz Snappy Internet Telecom 7266 SW 48 Street Miami, Fl 33155 Tel: 305 663 5518 x 232 Helpdesk: 305 663 5518 option 2 Email: supp...@snappydsl.net On 10/10/2011 3:16 PM, Matt Jenkins wrote: We have been having issues with the ubiquiti converters failing and even

[WISPA] Anyone ever use this cable? CA5EF-FTP-RF1000

2011-07-07 Thread Matt Jenkins
We have a new GM and has switched us to using a new cable for towers. Its made by pcAirLink Wireless part number: CA5EF-FTP-RF1000. I am worried about the gel inside getting hot and running down the cable. Anyone ever used this? If not what do you use? Does the gel/waterblock leak when hot?

Re: [WISPA] Remote generator monitoring?

2011-06-28 Thread Matt Jenkins
Automatic transfer switch into a site monitor into a RB750. RB750 has a l2tp connection back to the core router. This allows us to have small generators that can be put at any site and monitored easily. On 06/24/2011 02:34 PM, Forrest Christian wrote:

Re: [WISPA] Ubiquity UniFi Dual Band Radios

2011-01-07 Thread Matt Jenkins
I just had it confirmed that it is dual band concurrently. On 01/06/2011 08:53 PM, Robert West wrote: But will they be Dual Band concurrently or will they run only either or?

Re: [WISPA] 3.65 sample letter to grandfather earth satellite

2011-01-04 Thread Matt Jenkins
Below is what I sent to Sprint for their approval. It took 90 days for Sprint to respond but I got permission. I have some of the other earth stations contact information if you need it. -Cheers Dear Robin Cohen, I was given your email by Jerry Richardson

Re: [WISPA] Motorola PMP 320

2010-12-16 Thread Matt Jenkins
Can you post what latency looks like when using 1400 byte packets at least 10 ever second? Thanks, - Matt On 12/16/2010 12:06 PM, David Sovereen wrote: The current firmware works very well. If you haven't done so already, upgrade to the latest firmware, as it resolves tons of RF link

Re: [WISPA] Verizon Network Extender

2010-12-16 Thread Matt Jenkins
I have customers in 2+ story stucco houses with tile roofs. They might as well be caves! On 12/16/2010 02:05 PM, Philip Dorr wrote: It requires GPS (which most people not in caves have) and about 60k connection both ways per conversation (up to 3 conversations). It creates an IPSEC VPN out to

Re: [WISPA] Open Internet Filers thus far

2010-12-13 Thread Matt Jenkins
I think it would be good if we California WISPs mention that the CPUC (California Public Utilities Commission) includes us in their Mobile coverage? On 12/13/2010 08:11 AM, Rick Harnish wrote: Below is a list of companies that

Re: [WISPA] UBNT GPS

2010-11-25 Thread Matt Jenkins
Just for clarification, UBNT-Hal is in Georgia. On 11/25/2010 06:53 PM, Chuck Hogg wrote: I don't even think WHT is saying much about it...from what people say about him, he's a big beta/alpha tester. If you look at the GPS Coordinates from the page, it shows

Re: [WISPA] 5 gig antennas

2010-11-16 Thread Matt Jenkins
There is a 6dbi option with 30deg beamwidth. The link to the catalog is: http://www.larsen-antennas.com/docfiles/ASB10/BroadbandAntennas.pdf On 11/16/2010 09:46 AM, Marlon K. Schafer wrote: Boy, that's the only suggestion? Pretty scary that there are so few out there. That one only has an

Re: [WISPA] Nagios vs. The Dude

2010-11-15 Thread Matt Jenkins
What about pnp4nagios for graphing and nagvis for map of network? Have you looked at NINJA for nagios? On 11/15/2010 09:45 AM, Mark Nash wrote: We have Nagios for monitoring/alerting on: - wireless network components : up/down, flapping, signal levels, is ssh interface

Re: [WISPA] 5 gig antennas

2010-11-15 Thread Matt Jenkins
Larsen RO5810NF 10dbi Omni with N-Female connector. On 11/15/2010 10:42 AM, Marlon K. Schafer wrote: Hi All, I need a 5 gig omni. 8 or 9 dB. I've got one from Winncomm but I don't like it much. The mount seems to place the raydome below the mounting bracket etc. What are folks using and

[WISPA] Mikrotik Filters Question

2010-11-15 Thread Matt Jenkins
I have 6 virtual wlan interfaces. I want to prevent traffic form any wlan interface to reach any other wlan interface. This includes the IP address of the wlan interface. Besides creating 42 (I think) filters to do this is there any way to group interfaces into a filter template or something?

Re: [WISPA] Mikrotik Question: Subinterface?

2010-11-15 Thread Matt Jenkins
Ok simplification of what I need to do. I need to get more than 1 DHCP address on the same physical ethernet port I can assign more than 1 static address, so why not more than 1 dynamic address? On 11/02/2010 01:15 PM, Matt Jenkins wrote: How do I create a subinterface on an ethernet port

Re: [WISPA] Mikrotik Question: Subinterface?

2010-11-15 Thread Matt Jenkins
In this instance, I have no control upstream beyond the mikrotik On 11/15/2010 03:16 PM, Josh Luthman wrote: You can only have 1 dhcp server port per interface. You'll need to do vlans. On Nov 15, 2010 6:12 PM, "Matt Jenkins" m...@smarterbroadband.net wrote: Ok simp

Re: [WISPA] Mikrotik Filters Question

2010-11-15 Thread Matt Jenkins
. Drop all other traffic that enters the router from any interface that is not public (i.e. enter on lan and leave on otherlan). - On 11/15/2010 5:46 PM, Matt Jenkins wrote: I have 6 virtual wlan

Re: [WISPA] Mikrotik Filters Question

2010-11-15 Thread Matt Jenkins
awesome thanks! I didn't realize you could specify a != that simplifies a bunch of other filters I have setup before. On 11/15/2010 04:06 PM, Butch Evans wrote: On Mon, 2010-11-15 at 14:46 -0800, Matt Jenkins wrote: I have 6 virtual wlan interfaces. I want to prevent traffic form any

Re: [WISPA] Telescoping Mast

2010-11-09 Thread Matt Jenkins
We just flipped from booking an install to doing site surveys. Even when checking google earth and radio mobile approximately 50% of installs booked would fail due to foliage being in the way. We can have over 1 hour drive time to get to some of these locations. For us its much more sensible

Re: [WISPA] New UBNT 900 gear

2010-11-09 Thread Matt Jenkins
With the only certified antenna for the RocketM900 being the 13dbi panel I am skeptical about its performance. In addition the LocoM900 is only 7dbi. I however am losing access to 900 due to the smart meters in the area. AirSelect might help with performance and maintain some ability to use

Re: [WISPA] Need Mikrotik Wireless help

2010-11-09 Thread Matt Jenkins
and such, an RB493AH might be worth the few extra dollars. Sneaky one-liner to block inter-client traffic... /ip firewall filter add chain=forward \ in-interface=!ether1 out-interface=!ether1 action=drop -Kristian On Tue, 2010-11-09 at 12:29 -0800, Matt Jenkins wrote: What mikrotik would

Re: [WISPA] Need Mikrotik Wireless help

2010-11-09 Thread Matt Jenkins
- too many ports is better then not enough. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Nov 9, 2010 at 3:49 PM, Matt Jenkins m...@smarterbroadband.net wrote: I will need to do 1 simple queue per customer for throughput

Re: [WISPA] Need Mikrotik Wireless help

2010-11-09 Thread Matt Jenkins
with the rb493ah and xr2 - too many ports is better then not enough. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Nov 9, 2010 at 3:49 PM, Matt Jenkins m...@smarterbroadband.net wrote: I will need to do 1 simple queue per customer

Re: [WISPA] Need Mikrotik Wireless help

2010-11-09 Thread Matt Jenkins
On 11/9/2010 3:11 PM, Matt Jenkins wrote: Why the extra for an XR2 vs 1/3 the cost for a R52? On 11/09/2010 12:54 PM, Josh Luthman wrote: It looks to me like the rb411ahr (or whatever has the radio built in) would work. If you need a better radio get an rb411a + xr2. You

Re: [WISPA] OT; securing extension ladder to SUV roof rack

2010-11-08 Thread Matt Jenkins
We use bungee cords, preferably the kind with the carabiners on each end. One in the front and one in the back. They have never failed. Only people have caused failures so far. On 11/08/2010 12:48 PM, Steven McGehee wrote: Hi all, Got a situation that I think a lot of you all probably deal

Re: [WISPA] Licensed 11ghz Hops

2010-11-05 Thread Matt Jenkins
If you want to leverage dual pol with XPIC you could look at Dragonwave quantum. On 11/04/2010 02:20 PM, Matt wrote: We are looking at upgrading our network and adding a handful(7) 11ghz licensed hops. What gear out there can use both horizontal and vertical at once to increase throughput?

[WISPA] Mikrotik Question: Subinterface?

2010-11-02 Thread Matt Jenkins
How do I create a subinterface on an ethernet port on a rb750? Bridged CPE - Tik Port1 - Port2 Cust 1 - Port3 Cust 2 I need to create two sub interfaces on Port 1. One for each customer to receive an IP via DHCP. Then I need to NAT each of those sub

[WISPA] RB1100U Anywhere?

2010-10-29 Thread Matt Jenkins
Does anyone know of a company with stock of these? I am possibly looking for 6-8 of them. Thx, - Matt WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] RB1100U Anywhere?

2010-10-29 Thread Matt Jenkins
What is the power draw of the 1100? On 10/29/2010 04:15 PM, Mark Nash wrote: Well Butch you like very much to tell people that's not what I said when someone disagrees with you. Well That's not what I said. You took that leap. I wasn't comparing x86...don't even remember typing those

Re: [WISPA] Licensed at 40-60-80Ghz - short distance link

2010-10-28 Thread Matt Jenkins
Bridgewave now has an 18ghz and 23ghz product that will do 1gbps. On 10/28/2010 07:47 AM, Paolo Di Francesco wrote: Hi All, I was wondering if somebody of you is working at those frequencies, on moutain top or heavy-rain The point is that I am curious to know your experience at those

Re: [WISPA] Remote Controlled Drone

2010-10-21 Thread Matt Jenkins
Shaver yes: http://www.tomsoft.co.uk/iphone/shaver.htm On 10/20/2010 09:01 PM, RickG wrote: Does an iphone include a shaver swiss knife yet? :) On Wed, Oct 20, 2010 at 8:21 PM, John Thomas jtho...@quarnet.com wrote: I have no idea if this would be on any use to anyone, but it seems

Re: [WISPA] 3650 Deployment

2010-10-19 Thread Matt Jenkins
Through heavy foliage (4 miles and 20 oak trees), when using 3.65 vs 900 Motorola equipment I got better downlink but worse uplink. This was because the CPE is only 2x1 MIMO (has only one TX radio). I believe the use of a true 2x2 MIMO 3.65 CPE will perform better than most 900 systems in some

Re: [WISPA] WISPA Ex Parte Filing from yesterday

2010-10-15 Thread Matt Jenkins
Brian, I really like your idea for a full duplex system. Your example does not appear to have much foliage and has rather high density. I feel that TVWS should be used primarily for the low density with lots of foliage. High density areas like that could very easily be serviced with higher

Re: [WISPA] New Listserv Policy QA

2010-10-12 Thread Matt Jenkins
Would you mind highlighting (bold or something) what has changed? On 10/12/2010 05:43 AM, Rick Harnish wrote: I just sent out an announcement for the new WISPA Listserv Policy. I have opened this thread to address any comments, questions and concerns about the new policy. The

Re: [WISPA] Shopping for bandwidth

2010-10-04 Thread Matt Jenkins
I can get Cogent for $600 per month for 100/100 meg! Just have to BH it 44 miles.. On 10/04/2010 12:55 PM, support wrote: Tell them you pay $200 per month for A 50/50 meg link can you beat that? :) On 10/4/2010 2:46 PM, Cameron Kilton wrote: I just laugh at them and say,

Re: [WISPA] Transmit Antenna Height

2010-10-01 Thread Matt Jenkins
What are the headings for your chart? I don't understand it On 09/30/2010 08:13 PM, Fred Goldstein wrote: At 9/30/2010 10:37 PM, Jack Unger wrote: Fred, I'm sorry to seem dense but I don't understand your explanation below. I'd appreciate it if you would re-explain. The FCC said:

Re: [WISPA] Transmit Antenna Height

2010-10-01 Thread Matt Jenkins
/01/2010 11:56 AM, Fred Goldstein wrote: At 10/1/2010 02:27 PM, Matt Jenkins wrote: What are the headings for your chart? I don't understand it Eudora had trouble with cut-and-paste of the original document. The first column is height above average terrain, from x to y meters (10

Re: [WISPA] Transmit Antenna Height

2010-10-01 Thread Matt Jenkins
wrote: At 10/1/2010 02:27 PM, Matt Jenkins wrote: What are the headings for your chart? I don't understand it Eudora had trouble with cut-and-paste of the original document. The first column is height above average terrain, from x to y meters (10 but less than 30, from

Re: [WISPA] 11GHz fade margin

2010-09-29 Thread Matt Jenkins
Why Exalt over Dragonwave or SAF? On 09/29/2010 12:49 PM, Marco Coelho wrote: We're looking at the exalt ExploreAir for these links. Anyone using them in 11 GHz? I'd like some first hand feedback. Marco On Wed, Sep 29, 2010 at 2:02 PM, David E. Smith d...@mvn.net wrote: On

[WISPA] Batch HAAT Calculator

2010-09-28 Thread Matt Jenkins
Does anyone know of a tool to calculate HAAT for hundreds or thousands of coordinates? WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Dual Polarity, Dual Band Dish

2010-09-28 Thread Matt Jenkins
Most dual band antennas I have seen work by putting one frequency on vertical and one frequency on horizontal. On 09/28/2010 08:01 AM, Nick White wrote: Anyone have ideas on a dual band(2.4Ghz and 5Ghz), dual polarity dish? I found this, but it appears to be single polarity

Re: [WISPA] Batch HAAT Calculator

2010-09-28 Thread Matt Jenkins
is of swapping most of my 900 customer base to TVWS. I am wondering how many of them will be above the limit... On 09/28/2010 10:38 AM, Cameron Crum wrote: for what purpose? On Tue, Sep 28, 2010 at 11:14 AM, Matt Jenkins m...@smarterbroadband.net wrote: Does anyone know of a tool to calculate HAAT

Re: [WISPA] Batch HAAT Calculator

2010-09-28 Thread Matt Jenkins
Only one at a time. :( On 09/28/2010 11:10 AM, Jim Patient wrote: Radio Mobile Jim Patient Cell: 314-565-6863 Desk: 636-692-4200 YIM: jeffcosoho www.wlan1.com www.linktechs.net www.wifimidwest.com On 9/28/2010 11:14 AM, Matt Jenkins wrote: Does anyone know of a tool

Re: [WISPA] FW: TechNet Flash: IE9 Beta is here

2010-09-23 Thread Matt Jenkins
I was really liking Chrome until I discovered there is no print selection capability So back to Firefox for me too! On 09/22/2010 11:23 PM, RickG wrote: I rolled back to Firefox :) On Wed, Sep 22, 2010 at 10:36 PM, Tom Sharples tsharp...@qorvus.com mailto:tsharp...@qorvus.com wrote:

Re: [WISPA] Referral Programs

2010-09-23 Thread Matt Jenkins
We actually mail a check for $25 to the person who referred. The check in hand is a physical reminder of the referral. We feel that this is better than the nebulous credit they really don't see or interact with. On 09/23/2010 06:59 AM, Jeremy Rodgers wrote: We are looking into creating a solid

Re: [WISPA] Transmit Antenna Height

2010-09-23 Thread Matt Jenkins
They listed all fixed devices must be below 75 meters HAAT. A lot of customers fixed CPE could be well above that as well. On 09/23/2010 01:50 PM, Brian Webster wrote: If you are on a high mountain and there are also a lot of other high locations around you your HAAT number could still be

Re: [WISPA] Transmit Antenna Height

2010-09-23 Thread Matt Jenkins
Especially since the 900 works in the low areas where you can shut out the noise using the terrain. On 09/23/2010 02:34 PM, Fred Goldstein wrote: At 9/23/2010 04:50 PM, Brian Webster wrote: If you are on a high mountain and there are also a lot of other high locations around you your HAAT

Re: [WISPA] Specifications for Internet services on public frequency

2010-09-21 Thread Matt Jenkins
Robert West, Glenn Kelley and of course Matt Jenkins, strongly recommended me this list for my “case”. We are located in Haiti. My team is working on technical and technological specifications of a document for the deployment of Internet service on public frequencies in rural areas. We welcome

Re: [WISPA] FW: Specifications for Internet services on public frequency

2010-09-18 Thread Matt Jenkins
the area I work with. These are just some of the thoughts off the top of my head. If I can offer anything further I would be more than happy to do so. Cheers, Matt Jenkins SmarterBroadband On 09/18/2010 03:51 PM, Robert West wrote: Hey all. I've reached out and replied to Paul here

Re: [WISPA] FW: Specifications for Internet services on public frequency

2010-09-18 Thread Matt Jenkins
be damn fun to do it! Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Matt Jenkins Sent: Saturday, September 18, 2010 8:05 PM To: WISPA General List Cc: Robert West; 'Georges-Keny PAUL' Subject: Re: [WISPA] FW

Re: [WISPA] Moto BH Reset to Default

2010-09-12 Thread Matt Jenkins
I have had Cacti cause changed to some of my switches and to an couple of APs before. I also had an SM that ants infected and caused a short across the timing port causing the SM to reset itself. This is one of the hazards of putting SMs 100+ feet up trees. On 09/09/2010 09:59 AM, Forbes

Re: [WISPA] OT: Looking for Layer 3 Switch with BGP?

2010-09-11 Thread Matt Jenkins
After many days of searching it looks like I found something in the sub $20k range. The ME-C6524GT-8S appears to do it all. On 09/08/2010 04:16 PM, Jon Auer wrote: Needing full BGP routes takes you out of the realm of cheap Layer 3 switches... You need to worry about TCAM (hardware route

Re: [WISPA] OT: Looking for Layer 3 Switch with BGP?

2010-09-11 Thread Matt Jenkins
I am thinking its time to use a switch as a switch and a router as a router. I am thinking about using this for the MPLS backbone and put in actual 7200/7300 routers at locations where full BGP needs to be offered. What I haven't yet worked out is whether two routers can establish a BGP

Re: [WISPA] OT: Looking for Layer 3 Switch with BGP?

2010-09-11 Thread Matt Jenkins
No I haven't. But I will look into it now. Let me know how your talk with the sales guys goes? On 09/11/2010 02:38 PM, Jon Auer wrote: That makes sense. BGP over a VPLS VC shouldn't be any different than BGP across a Ethernet cable AFAIK. Have you checked out the Alcatel-Lucent SR series

Re: [WISPA] OT: Looking for Layer 3 Switch with BGP?

2010-09-11 Thread Matt Jenkins
Yikes $40k again. I am trying to come up with a sub $12k solution. On 09/11/2010 02:39 PM, Matt Jenkins wrote: No I haven't. But I will look into it now. Let me know how your talk with the sales guys goes? On 09/11/2010 02:38 PM, Jon Auer wrote: That makes sense. BGP over a VPLS VC

[WISPA] OT: Looking for Layer 3 Switch with BGP?

2010-09-08 Thread Matt Jenkins
I am trying to find a Layer 3 switch that has 24 or 48 1000 base-T ports with enough RAM to handle Full BGP Internet Routes. Anyone have any suggestions? For those who wonder why I am upgrading all of my backhauls to support ~300mbps. In addition I need to be able to offer BGP connections

Re: [WISPA] OT: Looking for Layer 3 Switch with BGP?

2010-09-08 Thread Matt Jenkins
cant find a router that has more than about 6 1000base-T ports so I was thinking a Layer 3 switch that has 1GB of ram might be easier to find. The switch would also have the backplane to handle the traffic. On 09/08/2010 02:36 PM, David E. Smith wrote: On Wed, Sep 8, 2010 at 16:31, Matt Jenkins

  1   2   >