Re: [WISPA] DC UPS (and Solar?) Setup.

2016-07-14 Thread Paul Hendry
-- This message has been scanned for viruses and dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is believed to be clean. ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless No virus

Re: [WISPA] chilly tower climb

2014-11-12 Thread Paul Hendry
list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- Paul Hendry Skyline Support - NZ NOC Skyline Networks NZ Ltd 13-17 Putaitai Street, Stoke, Nelson 7011 Tel: 022 639 3328 Email: paul.hen...@skyline-networks.com Web: http://www.skyline-networks.com This email

Re: [WISPA] Source for used Smart UPS XL

2014-11-06 Thread Paul Hendry
and dangerous content by *MailScanner* http://www.mailscanner.info/, and is believed to be clean. ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- Paul Hendry Skyline Support - NZ NOC Skyline Networks

Re: [WISPA] Source for used Smart UPS XL

2014-11-06 Thread Paul Hendry
and at worst cause an explosion or fire. On Nov 6, 2014 2:43 PM, Paul Hendry paul.hen...@skyline-networks.com mailto:paul.hen...@skyline-networks.com wrote: Anyone started use LiFePO4 batteries in APC's yet? On 07/11/2014 05:14, Mike Hammett wrote: I got some from (I think) Coastal

Re: [WISPA] mikrotik - bridge - van - eoip questions

2014-07-01 Thread Paul Hendry
assign vlan to wan interface create eoip tunnel assign ip address to vlan interface ? bridge ( lan, vlan, eoip tunnel) ? -- Paul Hendry Technical Director Skyline Networks Consultancy Ltd Unit 6C - Woodside Commercial Estate, Woodside, Thornwood, Epping, Essex CM16 6LJ Tel

Re: [WISPA] [Spam] Re: Mikrotik on Multi-core

2014-01-26 Thread Paul Hendry
We also had issues with the routing package on v5.26. Mikrotik didn't want to know as we weren't running the latest release. Pointed out v5.26 was the latest to which they said no, v6.7 is. V5 is unsupported even though it's still available on the website for download so bottom line, unless you

Re: [WISPA] MPLS / Mikrotik Assistance Needed

2013-11-11 Thread Paul Hendry
Hi Scott, What in particular are you looking to achieve? Many thanks, Paul. - Reply message - From: Scott Carullo sc...@brevardwireless.com To: wireless@wispa.org, us...@wispa.org Cc: Carullo, Scott sc...@flhsi.com Subject: [WISPA] MPLS / Mikrotik Assistance Needed Date: Mon, Nov 11,

[WISPA] Ceragon IP-10 Antenna Requirement

2013-08-17 Thread Paul Hendry
-C's? Many thanks, -- Paul Hendry Technical Director Skyline Networks Consultancy Ltd Web: http://www.skyline-networks.com This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom it is addressed. If you

Re: [WISPA] Mikrotik MPLS voodoo

2013-07-13 Thread Paul Hendry
First stage would be to check the basics. Can both ends of the VPLS tunnel ping each other? Are all interfaces between end points exchanging LDP? Assuming this is all good I suspect an MTU issue so have you got any RB450G, RB493G, older routerboards, etc. in the path? - Reply message -

Re: [WISPA] Mikrotik MPLS voodoo

2013-07-13 Thread Paul Hendry
Hi Scott, If you perform a ping between your pe routers (mikrotik devices prior to hand-off to customer), what is the maximum size packet you can send successfully, with df bit set? P. - Reply message - From: Scott Carullo sc...@brevardwireless.com To: Paul Hendry paul.hen...@skyline

Re: [WISPA] Mikrotik the dude

2012-11-23 Thread Paul Hendry
backend DB. On 22/11/2012 17:07, Josh Luthman wrote: I'm using ROS. It is a known bug. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 22, 2012 12:01 PM, Paul Hendry paul.hen...@skyline-networks.com mailto:paul.hen...@skyline-networks.com

Re: [WISPA] Mikrotik the dude

2012-11-22 Thread Paul Hendry
for viruses and dangerous content by *MailScanner* http://www.mailscanner.info/, and is believed to be clean. ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- Paul Hendry Technical Director Skyline

Re: [WISPA] Upload and download Shaping in MikroTik radios

2012-09-05 Thread Paul Hendry
/wireless -- Paul Hendry Technical Director Skyline Networks Consultancy Ltd Unit 6C - Woodside Commercial Estate, Woodside, Thornwood, Epping, Essex CM16 6LJ Tel: 0845 004 0404 Mob: 0783 492 1803 Email: paul.hen...@skyline-networks.com Web: http://www.skyline-networks.com

Re: [WISPA] Upload and download Shaping in MikroTik radios

2012-09-05 Thread Paul Hendry
on the wire interface. On 9/5/2012 9:13 AM, Paul Hendry wrote: Depends on your topology. If you are planning to use username/passwords with PPP then bandwidth limits can be done on the PPP concentrator. If they are just going to be routed then you will need to mark all traffic then use queue

Re: [WISPA] RB-411AH being really Weird

2010-12-14 Thread Paul Hendry
Do the ethernet ports show any errors? Do you use ferrites on the cat5 cables? -original message- Subject: [WISPA] RB-411AH being really Weird From: Steve Barnes st...@pcswin.com Date: 14/12/2010 1:56 pm Mikrotik Gurus please Read and give advice sorry for the length of this. I have a tower

[WISPA] Filters Anyone?

2010-11-23 Thread Paul Hendry
Hi guys, Can anyone recommend some good quality BPF’s for 5GHz? Many thanks, Paul Hendry Technical Director Skyline Networks Consultancy Ltd Unit 6C - Woodside Commercial Estate, Woodside, Thornwood, Epping, Essex CM16 6LJ Tel: 0845 004 0404 Mob: 0783 492

Re: [WISPA] Nagios vs. The Dude

2010-11-16 Thread Paul Hendry
a different Dude than I am. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On 11/15/2010 11:03 PM, RickG wrote: Never, and I mean never, has Dude locked on my Win 2003 server. On Mon, Nov 15, 2010 at 1:46 PM, Paul Hendry paul.hen...@skyline-networks.com wrote: Dude makes

Re: [WISPA] Nagios vs. The Dude

2010-11-15 Thread Paul Hendry
Dude makes it much easier for support staff to properly support the network and provides all sorts of stats to prove issue to customers. We do however have issues with Dude locking up on both WinXP and RouterOS when the back-end database gets to 2GB. _ From: Jason Hensley

Re: [WISPA] Mikrotik Dude 2GB Limitation

2010-10-20 Thread Paul Hendry
hesitant to move to it since it’s still beta. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Paul Hendry Sent: Tuesday, October 19, 2010 3:02 PM To: wireless Subject: Re: [WISPA] Mikrotik Dude 2GB Limitation The majority of the data is traffic

[WISPA] Mikrotik Dude 2GB Limitation

2010-10-19 Thread Paul Hendry
. Anyone know what the issue is likely to be and any possible work arounds? Many thanks, Paul Hendry Technical Director Skyline Networks Consultancy Ltd Unit 6C - Woodside Commercial Estate, Woodside, Thornwood, Epping, Essex CM16 6LJ Tel: 0845 004 0404 Mob: 0783 492 1803

Re: [WISPA] Mikrotik Dude 2GB Limitation

2010-10-19 Thread Paul Hendry
To: WISPA General List Subject: Re: [WISPA] Mikrotik Dude 2GB Limitation Use RouterOS? On Oct 19, 2010 8:46 AM, Paul Hendry paul.hen...@skyline-networks.com wrote: Hi all, We have been using the latest beta version of the Dude to monitor bandwidth on some devices and have hit a slight snag

Re: [WISPA] Mikrotik Dude 2GB Limitation

2010-10-19 Thread Paul Hendry
Hi guys, I don’t want to suggest this thread has been hijacked but can we get back to the original question? Does anyone know if the 2GB limit is OS, SQLite or Dude related and if there is any work around? Many thanks, Paul. _ From: Josh Luthman

Re: [WISPA] Mikrotik Dude 2GB Limitation

2010-10-19 Thread Paul Hendry
distro? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 19, 2010 at 3:14 PM, Paul Hendry paul.hen...@skyline-networks.com wrote: Hi guys, I don’t want to suggest this thread has been hijacked but can we get back

Re: [WISPA] Mikrotik Dude 2GB Limitation

2010-10-19 Thread Paul Hendry
when I tried to back up. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 19, 2010 at 3:33 PM, Paul Hendry paul.hen...@skyline-networks.com wrote: Josh, Did you actually read the original post? The latest dude beta

Re: [WISPA] Mikrotik Dude 2GB Limitation

2010-10-19 Thread Paul Hendry
to stand on when bringing it up to Mikrotik. I would use the forum. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 19, 2010 at 4:02 PM, Paul Hendry paul.hen...@skyline-networks.com wrote: The majority of the data is traffic

Re: [WISPA] Tower Footings

2010-09-20 Thread Paul Hendry
a bunch of bucks but gotta make sure you stay within specs for the new tower. Also, bolting onto the old foundation, go deep! Bob- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Paul Hendry Sent: Saturday, September 18, 2010 12:07 PM To: wireless

[WISPA] Tower Footings

2010-09-18 Thread Paul Hendry
for mounting directly onto existing foundations or if this is just not a very good idea at all. Many thanks, Paul Hendry Technical Director Skyline Networks Consultancy Ltd Unit 6C - Woodside Commercial Estate, Woodside, Thornwood, Epping, Essex CM16 6LJ Tel: 0845 004 0404 Mob: 0783

Re: [WISPA] [WISPA Members] Suggestions on high-powered indoor CPEs?

2010-07-08 Thread Paul Hendry
Ruckus -Original Message- From: Josh Luthman [mailto:j...@imaginenetworksllc.com] Sent: 08 July 2010 15:24 To: memb...@wispa.org Cc: WISPA General List Subject: Re: [WISPA] [WISPA Members] Suggestions on high-powered indoor CPEs? Ubiquiti products Josh Luthman Office: 937-552-2340

[WISPA] DragonWave Horizon

2010-06-09 Thread Paul Hendry
Hey guys, Is anyone on-list a DragonWave reseller? Please hit me off-list. Many thanks, Paul Hendry Technical Director Skyline Networks Consultancy Ltd Unit 50, Weald Hall Commercial Centre, North Weald, Essex CM17 9LD Tel: 0845 004 0404 Mob: 0783 492 1803 Email

Re: [WISPA] Stupid MT tricks

2010-05-28 Thread Paul Hendry
Been there, done that. Did you check the NIC's against MT's hardware compatability list before ordering? -original message- Subject: [WISPA] Stupid MT tricks From: Marlon K. Schafer o...@odessaoffice.com Date: 28/05/2010 5:09 pm OK, yeah, I'm frustrated I'm sitting here beside a nice shiny

Re: [WISPA] Call Tracking / Customer management software

2010-05-12 Thread Paul Hendry
Hey Matt, I'm just about to start looking at Freeside for automating VoIP rating and billing. Have you had any joy with that? Only problem with Freeside I've seen so far is the lack of documentation which I'm guessing is on purpose to get you to pay for support. Many thanks, Paul.

Re: [WISPA] Ever wonder how bad RB333/444 stacked cards interfere?

2010-04-28 Thread Paul Hendry
IntAirNet- Fixed Wireless Broadband - Original Message - From: Paul Hendry paul.hen...@skyline-networks.com To: wireless wireless@wispa.org Sent: Tuesday, April 27, 2010 6:41 AM Subject: Re: [WISPA] Ever wonder how bad RB333/444 stacked cards interfere? Hey Tom, Do you have any issues

Re: [WISPA] Couple more questions for the 11Ghz folks

2010-04-23 Thread Paul Hendry
Hey Mike, As you have already done the path calcs for 11GHz, what frequency comes out best for the 30 mile shot in that environment? Cheers, P. -Original Message- From: michael mulcay [mailto:m...@wirelessstrategies.net] Sent: 23 April 2010 06:38 To:

Re: [WISPA] Pulling my hair out with an RB750

2010-03-02 Thread Paul Hendry
Can you ping the public address on the 750G from the lan? Can you ping any external public addresses from the 750G? If answer to both is yes, check masq rule on outbound interface and that connection tracking is enabled. -Original Message- From: Greg Ihnen [mailto:os10ru...@gmail.com]

Re: [WISPA] Solar suggestion for ultra low use site?

2010-01-18 Thread Paul Hendry
Do these charges have any builtin monitoring via SNMP? -Original Message- From: Christopher Erickson [mailto:christopher.k.erick...@gmail.com] Sent: 15 January 2010 19:22 To: 'WISPA General List' Subject: Re: [WISPA] Solar suggestion for ultra low use site? Latitude and average cloud

Re: [WISPA] High Pings for an AP?

2009-12-14 Thread Paul Hendry
Had a similar thing on a tower in Cyprus a few years back. Swapped cable twice, used shielded cable, tried all sorts. In the end we put the original cable back (none shielded, nothing special outdoor cat5e) but put ferrite beads on the cable and no further issues ;) Have put ferrites in every

Re: [WISPA] 20 mile link

2009-12-04 Thread Paul Hendry
We saw the same thing with Mikrotik + N. 4 AP's out there now running 4.1 (best of a bad bunch) in the hope the next release sorts some of the problems. I know this is a bit off topic but does anyone have the v4.0beta releases anywhere? -Original Message- From: George Morris

Re: [WISPA] 20 mile link

2009-12-04 Thread Paul Hendry
Hogg Shelby Broadband 502-722-9292 ch...@shelbybb.com http://www.shelbybb.com -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Paul Hendry Sent: Friday, December 04, 2009 7:26 AM To: wireless Subject: Re: [WISPA] 20 mile link We saw

Re: [WISPA] 20 mile link

2009-12-04 Thread Paul Hendry
. Seems pretty picky on this. - Be sure the RouterBoard firmware (not just RouterOS) is the correct revision ( /system routerboard print and /system routerboard upgrade) George -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Paul Hendry

Re: [WISPA] Dual Pol Grid Parabolic

2009-11-25 Thread Paul Hendry
, November 24, 2009 11:07 PM To: Paul Hendry; WISPA General List Subject: Re: [WISPA] Dual Pol Grid Parabolic I dont want to speak for the person who started the thread sector question... But I'm thrilled with the UBNT's Dual POl sector option. I think the only problem is availabilty. Tom DeReggi

Re: [WISPA] Dual Pol Grid Parabolic

2009-11-24 Thread Paul Hendry
Any reason the UBNT ones are not an option or is it just availability? -original message- Subject: Re: [WISPA] Dual Pol Grid Parabolic From: Tom DeReggi wirelessn...@rapiddsl.net Date: 25/11/2009 3:49 am yes they do for $1200. each :-( Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed

Re: [WISPA] MK VPLS via BGP!

2009-10-12 Thread Paul Hendry
Tested this a while back and although it saves on overhead and CPU, couldn't see how you could implement QoS on wireless links between P routers. How are you implementing QoS across the MPLS network? -Original Message- From: Gino Villarini [mailto:g...@aeronetpr.com] Sent: 10 October

Re: [WISPA] Bgp and mt

2009-10-05 Thread Paul Hendry
AS prepend tends to be only for inbound traffic, to influence outbound you can use a few different BGP attributes. There is a pecking order (at least in Cisco) as per below: Weight Local preference Multi-exit discriminator Origin AS_path Next hop Community Cheers, P. -Original

Re: [WISPA] Bgp and mt

2009-10-05 Thread Paul Hendry
Actually there are other ways to influence inbound traffic other than specific routes or AS Prepending (i.e. MED). The problem with more specific routes is that some ISP's will drop routes that have a small subnet (i.e too specific) as a way to reduce there BGP tables. Here is the logic behind

Re: [WISPA] Bgp and mt

2009-10-05 Thread Paul Hendry
. Prepending alone resolved my traffic engineering needs without causing any bad side effects. On Mon, Oct 5, 2009 at 11:20 AM, Paul Hendry paul.hen...@skyline-networks.com wrote: AS prepend tends to be only for inbound traffic, to influence outbound you can use a few different BGP attributes

Re: [WISPA] Remote Switch/UPS

2009-09-28 Thread Paul Hendry
Where looking at these a while back for some of our smaller sites. Do they support full SNMP? -Original Message- From: Brad Belton [mailto:b...@belwave.com] Sent: 28 September 2009 19:12 To: 'WISPA General List' Subject: Re: [WISPA] Remote Switch/UPS

Re: [WISPA] Remote Switch/UPS

2009-09-28 Thread Paul Hendry
MikroTik routers using the included USB cable. The only way to actually power cycle its outlets is via the web interface. Best, Brad -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Paul Hendry Sent: Monday, September 28, 2009 1:34 PM

Re: [WISPA] 5.8Ghz Sector Antenna Recommendations

2009-09-27 Thread Paul Hendry
Has anyone tried out the new Ubiquiti dual-pol sectors yet? They look pretty good and could be good for future proofing assuming they perform. -original message- Subject: [WISPA] 5.8Ghz Sector Antenna Recommendations From: pat p...@inlandnet.com Date: 25/09/2009 6:50 pm Looking to add a few

Re: [WISPA] Mikrotik Weirdness!?

2009-09-25 Thread Paul Hendry
Sounds like a duplex mismatch to me. Are both ends set to auto-negotiate and have they both negotiated 100mb/full? Have you checked for errors or discards on the interfaces at either end? -Original Message- From: sa...@michianawireless.com [mailto:sa...@michianawireless.com] Sent: 24

Re: [WISPA] Dual Pol FDX Link Issue

2009-09-24 Thread Paul Hendry
Are you running the XR5's at full power? Have you tried dialing down the tx power? We had a similar issue with some dual-pol antennas and had to turn the tx power down to less than 14db. -Original Message- From: Steve Barnes [mailto:st...@pcswin.com] Sent: 24 September 2009 12:46 To:

Re: [WISPA] Gettin sick of Microtik

2009-08-24 Thread Paul Hendry
Are you running NStreme as 120 clients seems a lot for an NStreme enabled AP without wireless-test package? Do you have latency to clients on all radio cards or just 1? Have you disabled connection tracking and default forward on the radio cards? -Original Message- From: Forbes Mercy

Re: [WISPA] Bullet M5 HP

2009-08-18 Thread Paul Hendry
Anyone had a chance to fully test any of Ubiquiti's claims like 150+mbps real throughput and 300+ subscribers per AP? Much more impressive numbers than Canopy. Matt wrote: Ubiquity has introduced their new product lines, at www.ubnt.com. Looking to take Canopy on. Anything like GPS

Re: [WISPA] Bullet M5 HP

2009-08-18 Thread Paul Hendry
- From: Paul Hendry paul.hen...@skyline-networks.com To: wireless wireless@wispa.org Sent: Tuesday, August 18, 2009 11:59 AM Subject: Re: [WISPA] Bullet M5 HP Anyone had a chance to fully test any of Ubiquiti's claims like 150+mbps real throughput and 300+ subscribers per AP? Much more impressive

Re: [WISPA] 5.8 Distance

2009-07-30 Thread Paul Hendry
Like a MT411a XR2 and a Arc 23 DB Panel Steve Barnes Manager PCS-WIN RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Paul Hendry Sent: Wednesday, July 29, 2009 12:58 PM To: WISPA General List Subject: Re

Re: [WISPA] 5.8 Distance

2009-07-29 Thread Paul Hendry
Depends on many things. What's at the CPE end for example. Steve Barnes wrote: I have a 2.4 sector that has terrible interference from a competitor pointing right at it and I am considering changing it to 5.8. With a 17dBi 120 degree sector what should the effective distance I can hope to

Re: [WISPA] Nice unit for POP Router / Appliance

2009-07-29 Thread Paul Hendry
Hey Randy, Any joy with testing ROS on one of these? Would be interesting to see how it stacks up against the RB1000's or the original PoweRouter. P. Randy Cosby wrote: I've got one of the supermicro units. They are hard to get - lots of demand. As soon as I get time I'll be putting

Re: [WISPA] Question about BGP + Mikrotik

2009-04-18 Thread Paul Hendry
Lots of memory. Do you redistribute the partial routes into your igp? -Original Message- From: Gino Villarini [mailto:g...@aeronetpr.com] Sent: 18 April 2009 15:45 To: WISPA General List Subject: [WISPA] Question about BGP + Mikrotik List Im running 3.15 on our Core Router to our

[WISPA] Freeside Forum ??

2007-12-06 Thread paul hendry
Hi all, Looking at playing with Freeside for various billing reasons but, as some of you have pointed out, it's not the best product for when it comes to support. Have anyone found any good forums or documents that have helped you in the past? Many thanks, Paul.

RE: [WISPA] Strange Symptoms

2007-03-12 Thread paul hendry
What board are you running Mikrotik on and do you see any latency on the 5.8 side? -Original Message- From: Rick Smith [mailto:[EMAIL PROTECTED] Sent: 12 March 2007 20:28 To: 'WISPA General List' Subject: RE: [WISPA] Strange Symptoms yep, no matter which channel. -Original

RE: [WISPA] 18ghz links

2007-03-06 Thread paul hendry
Hi Travis, Just looking to venture into the world of 18GHz. We are looking at our first link to be about 17.5 miles and I'm wondering if you could give us more details on your 19 mile link (heights, dish size/db, throughput speeds, fade margin, etc.) Many thanks, Paul. -Original

RE: [WISPA] External battery on UPS

2007-03-04 Thread paul hendry
. Changing the quantity and/or type of battery risks damaging either the charger or the batteries. Also, runtime is determined by the batteries, so changing them changes the runtime. paul hendry wrote: Is anyone using external batteries on the larger APC UPS's? I've got an old Smart-UPS

RE: [WISPA] External battery on UPS

2007-03-01 Thread paul hendry
Is anyone using external batteries on the larger APC UPS's? I've got an old Smart-UPS 3000 RM that has 8 x 12v batteries in it. The thing is they are wired in a bit of a strange config. It looks to me like they are split into 4 sets of 2 batteries running in series then 2 of those sets are

RE: [WISPA] SmartPhone Happiness...

2007-01-25 Thread paul hendry
/24/07, paul hendry [EMAIL PROTECTED] wrote: I'm running putty on my E70. Is great to be on a roof with mobile in one hand whilst you pan your StarOS or Mikrotik cpe ;) Only down side seems to be the lack of a tab key. -Original Message- From: Chad Halsted [mailto:[EMAIL PROTECTED

RE: [WISPA] Mikrotik 1 to 1 NAT question

2007-01-25 Thread paul hendry
You will need to add a srcnat rule for every dstnat rule you want to work. Cheers, P. Skyline Networks Consultancy Ltd www.skyline-networks.com -Original Message- From: Don Annas [mailto:[EMAIL PROTECTED] Sent: 25 January 2007 04:52 To: wireless@wispa.org Subject: [WISPA] Mikrotik 1

RE: [WISPA] SmartPhone Happiness...

2007-01-24 Thread paul hendry
I'm running putty on my E70. Is great to be on a roof with mobile in one hand whilst you pan your StarOS or Mikrotik cpe ;) Only down side seems to be the lack of a tab key. -Original Message- From: Chad Halsted [mailto:[EMAIL PROTECTED] Sent: 23 January 2007 19:32 To: WISPA General

RE: [WISPA] SmartPhone Happiness...

2007-01-22 Thread paul hendry
I have been using the E70 for a while and it is great. It has all the features of the E61 (sip, wifi, etc) but it also has a camera and flips open to reveal a full qwerty keyboard which I found really quick to get use to. Add an SSH client and I can suddenly manage almost every aspect of my

RE: [WISPA] MTI Dual-Pol with Integrated Enclosure

2007-01-21 Thread paul hendry
order it for you, if they don't stock it. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: paul hendry [EMAIL PROTECTED] To: wireless@wispa.org Sent: Saturday, January 20, 2007 11:29 AM Subject: RE: [WISPA] MTI Dual-Pol with Integrated

RE: [WISPA] MTI Dual-Pol with Integrated Enclosure

2007-01-20 Thread paul hendry
Hi Rick, Do you know if Winncom sell the dual-pols that are compatible with the MTI enclosure? I can see they sell the enclosure and the standalone dual-pols but can't see any reference to it on there site and unfortunately there aren't open on Saturdays to ask :( Many thanks, Paul.

RE: [WISPA] External battery on UPS

2006-11-25 Thread Paul Hendry
PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mario Pommier Sent: 24 November 2006 19:04 To: WISPA General List Subject: Re: [WISPA] External battery on UPS Yes, Paul. What are you looking for? Mario Paul Hendry wrote: Just out of interest, does anyone run batteries (via fuses) directly

RE: [WISPA] External battery on UPS

2006-11-24 Thread Paul Hendry
Just out of interest, does anyone run batteries (via fuses) directly into cat5 instead of converting back to AC just to run standard 48v PoE up the tower? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Wallace Sent: 17 November 2006 21:19 To: WISPA

RE: [WISPA] Anyone using Exalt radios????

2006-11-14 Thread Paul Hendry
Interesting. Any idea what the retail value on the 5GHz kit is? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Moldashel Sent: 14 November 2006 02:00 To: WISPA General List Subject: [WISPA] Anyone using Exalt radios Just looking for

RE: [WISPA] Anyone using Exalt radios????

2006-11-14 Thread Paul Hendry
detailed price sheet including accessories and extended warranties. http://www.connectronics.com/exalt/ Regards, Dawn DiPietro Paul Hendry wrote: Interesting. Any idea what the retail value on the 5GHz kit is? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

RE: [WISPA] Alvarion is Back!!!

2006-11-13 Thread Paul Hendry
program, but Patrick, why only the 5.8 gear included in this? Doesn't help us out much where we have TONS of trees, right? Why no 2.4 or 900 gear included in the program too? - Original Message - From: Paul Hendry [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent

RE: [WISPA] Alvarion is Back!!!

2006-11-13 Thread Paul Hendry
Thanks guys. Patrick, is there a reason this is only available to the US? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: 13 November 2006 18:44 To: 'WISPA General List' Subject: RE: [WISPA] Alvarion is Back!!! Did it not get sent

RE: [WISPA] OT: The AlvarionCOMNET is coming 11/13...

2006-11-09 Thread Paul Hendry
So for those of us that couldn't make it, any more news? Is it a cheaper version of the VL? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Leary Sent: 07 November 2006 22:14 To: WISPA General List Subject: [WISPA] OT: The AlvarionCOMNET is coming

RE: [WISPA] lightning

2006-10-16 Thread Paul Hendry
Hi Brad, Im curious as to why you chose this particular model of ferrite and if you run poe through these cables? Did these resolve a problem you where having with interference on the cat5? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jenco Wireless Sent: 08

[WISPA] DIY Wireless Enclosures

2006-10-04 Thread Paul Hendry
Hi all, This is aimed at anyone who builds there own x86 kit but anyone with experience in this arena is more than welcome to chime in. Basically I'm trying to gauge if using a sealed enclosure is really best for mounting x86 based kit outdoors or if a well ventilated enclosure would be better.

RE: [WISPA] Routing woes.....

2006-09-17 Thread Paul Hendry
In a routed network I would expect all interfaces that directly connect on the same lan segment to have addresses from the same network range. As yours do not then it suggests you are bridging and, as Lonnie said, chances are this is the route cause of your problems. Perhaps now is the time to

RE: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Paul Hendry
Brian, Just out of interest, did you try running both power and data over the new cable and did you still see the same issue? P. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: 15 September 2006 02:43 To: WISPA General List

RE: [WISPA] OT: OpenSER and CCME

2006-09-14 Thread Paul Hendry
-Original Message- From: Paul Hendry [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 13, 2006 05:44 PM To: ''WISPA General List'' Subject: [WISPA] OT: OpenSER and CCME Hi all, This is slightly un wireless related but I was wondering if anyone else is using OpenSER for there VoIP

RE: [WISPA] MT power supplies

2006-09-13 Thread Paul Hendry
Have you tried just using a different PSU with higher voltage and higher ampage? Also, how many re-terminations do you have between the power injector and the RB532? P. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: 12 September

RE: [WISPA] MiniPCI wireless card recommendation...

2006-09-13 Thread Paul Hendry
I would say that it depends on the application. The CM9 and the R52 use different generation of Atheros chipset. The main difference between the 2 chipsets is the newer chipset requires slightly less power to run and if you are running the card in 10MHz or 5MHz modes it will only listern

RE: [WISPA] MiniPCI wireless card recommendation...

2006-09-13 Thread Paul Hendry
when set to 5 MHz mode? Lonnie On 9/13/06, Paul Hendry [EMAIL PROTECTED] wrote: I would say that it depends on the application. The CM9 and the R52 use different generation of Atheros chipset. The main difference between the 2 chipsets is the newer chipset requires slightly less power

RE: [WISPA] MT power supplies

2006-09-13 Thread Paul Hendry
injector and the RB532? Where do I find this info? Brian -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: 13 September 2006 13:25 To: WISPA General List Subject: Re: [WISPA] MT power supplies Paul Hendry wrote: Have you tried

RE: [WISPA] Bragging on Mikrotik

2006-09-06 Thread Paul Hendry
Hi Butch, It was my understanding that using Mikrotik, EoIP, WDS and RSTP you could achieve a similar thing with only 1-2 ping drops per handoff between AP's at least that's what is being claimed by some on the MK forum. We are just about to test such a setup to facilitate a roaming VoIP solution

RE: [WISPA] MT on WAR

2006-09-06 Thread Paul Hendry
Different hardware architectures so I doubt it. As far as I know MK doesn't support Intel IXP-420 which is what the WAR's are. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson Sent: 06 September 2006 23:03 To: isp-wireless@isp-wireless.com;

RE: [WISPA] Routerboard 532 and NStreme2

2006-08-17 Thread Paul Hendry
So with this MTU increase is there any chance of packet aggregation so we can make use of it? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lonnie Nunweiler Sent: 17 August 2006 07:24 To: WISPA General List Subject: Re: [WISPA] Routerboard 532 and

RE: [WISPA] Re: [Ham-80211] Which PDA to buy as a WiFi Finder?

2006-08-14 Thread Paul Hendry
Nokia E70. Is a mobile + VoIP + wifi + runs Symbian which has a couple of stumbler type programs. I have one and it means with a PuTTy for Symbian I can look after my network no matter where I am ;) From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer

RE: [WISPA] Routerboard 532 and NStreme2

2006-08-13 Thread Paul Hendry
Hi Gino, Thanks for the results. As expected, small packets seriously damages the available throughput. Do you know if it also hammers the throughput on your other backhaul links where you use the Spectra or Atlas? I know a few people have asked Lonnie to incorporate some form of packet

RE: [WISPA] Routerboard 532 and NStreme2

2006-08-12 Thread Paul Hendry
Hi Lonnie, Would be great to see your test results using smaller packet sizes of 100bytes which seems to be around the average packet size for the majority of the traffic on my network. This test always seems to have a massive impact on the available throughput and is currently the reason why we

RE: [WISPA] orthogon gemini lite connectorized

2006-08-08 Thread Paul Hendry
Title: Message Hey JohnnyO, Being a big StarOS and Mikrotik user I have always been curious as to how these compare with the likes of Orthogon. I always saw the Gemini more as a product to use in NLOS environments. Have you ever compared Mikrotik on an RB532 with Orthogon in NLOS?

RE: [WISPA] Wrap 2 power

2006-08-03 Thread Paul Hendry
There are no new WRAP models on the market and due to AMD discontinuing the SC1100 CPU, the current WRAP models have a limited life. I have it on good authority that there may well be a replacement (with a much faster CPU) this side of Christmas ;) From: [EMAIL PROTECTED]

RE: [WISPA] RouterBoard 532A

2006-08-02 Thread Paul Hendry
Mikrotik is builtin. CF is for optional stuff like web caching. Boot it up and plug a console cable in to access. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: 02 August 2006 23:31 To: WISPA General List Subject: [WISPA] RouterBoard

[WISPA] Mikrotik CPE's

2006-07-29 Thread Paul Hendry
Ola, Anyone know anywhere that has stock of the RIC/522's from Mikrotik? Lead times direct are 3 - 4 weeks at the mo but we need 20 ASAP to be shipped to Cyprus. Cheers, P. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database:

RE: [WISPA] SercoNet

2006-07-22 Thread Paul Hendry
Would be interesting to see how long a cable run you could run these over. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter R. Sent: 20 July 2006 16:14 To: WISPA General List Subject: [WISPA] SercoNet Mixed Signals Wireless networks get a boost from

RE: [WISPA] frame size and fps - was OT: about 70Mbps for under $ 6K

2006-06-21 Thread Paul Hendry
I am and always have been a StarOS fan. They came out on top when we where initially tested various products 2 years ago and have been great since however we had to revisited RouterOS recently when we noticed that the majority of our traffic was 100 - 200 byte packets which was killing our WAR

RE: [WISPA] ATA - SIP Adapters

2006-06-21 Thread Paul Hendry
In my experience ATA adapters have always given better quality voice than a software solution. P. www.skyline-networks.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter R. Sent: 21 June 2006 21:28 To: WISPA General List Subject: Re: [WISPA] ATA

RE: [WISPA] frame size and fps - was OT: about 70Mbps for under $ 6K

2006-06-16 Thread Paul Hendry
Are these figures in the lab? I have seen similar with a Mikrotik/N-Streme solution. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Leary Sent: 16 June 2006 19:57 To: WISPA General List Subject: RE: [WISPA] frame size and fps - was OT: about

RE: [WISPA] looking for a device

2006-06-14 Thread Paul Hendry
the network, as that is when the jitter and sparatic latency happens. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Paul Hendry [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Tuesday, June 13, 2006 9:02 AM Subject: RE

RE: [WISPA] looking for a device

2006-06-13 Thread Paul Hendry
We too have been looking at moving from routed to a switched Mikrotik for the core network but the unknown quantity seems to be if there are any latency or speed issues related to the move. A true switched network is faster than a routed network as the switching is done at a hardware level but in

  1   2   3   >