Re: [WISPA] AN-50e won't power on

2011-06-05 Thread Blair Davis
when the lights blink every couple seconds on a switching power supply, it almost always means an overload... On 6/4/2011 9:08 PM, Mike Hammett wrote: This one has redundant power supplies. Neither one boots the system. I took the cover

Re: [WISPA] AN-50e won't power on

2011-06-04 Thread Mike Hammett
This one has redundant power supplies. Neither one boots the system. I took the cover off. One power supply ticks every 1 - 2 seconds. LEDs 12 and 13 blink at the same time. The other power supply doesn't tick, but the LEDs still just flash. My other unit that does power up has totally

[WISPA] AN-50e won't power on

2011-02-01 Thread Mike Hammett
I have an AN-50e that won't power on. I have tried either and both of the power supplies. Yes, they're plugged in to working outlets. Yes, the switches are on. Ideas? -- - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Josh Luthman
Unplug the odu. If it turns on then the odu or surge suppressors are bad. If it stays off power supply/idu is bad. On Feb 1, 2011 5:45 PM, Mike Hammett wispawirel...@ics-il.net wrote: I have an AN-50e that won't power on. I have tried either and both of the power supplies. Yes, they're plugged

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Eric Muehleisen
Replace the fuse? If you have an older AN-50 laying around and don't mind voiding warranty, you can crack the box and swap power supplies. -Eric On Tue, Feb 1, 2011 at 4:45 PM, Mike Hammett wispawirel...@ics-il.netwrote: I have an AN-50e that won't power on. I have tried either and both of

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Josh Luthman
Dozens of problems with them. Not one fuse problem. On Feb 1, 2011 5:49 PM, Eric Muehleisen ericm...@gmail.com wrote: Replace the fuse? If you have an older AN-50 laying around and don't mind voiding warranty, you can crack the box and swap power supplies. -Eric On Tue, Feb 1, 2011 at 4:45

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Eric Muehleisen
We have very bad commercial power out here in western Kansas. I've had several blown fuses. BTW, I've been through many dead ODU's and each time the IDU powers up regardless of what RG cable is connected to?? -Eric On Tue, Feb 1, 2011 at 4:57 PM, Josh Luthman j...@imaginenetworksllc.comwrote:

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Josh Luthman
Some times the ODU will cause it to not power up, but not every time. I guess it depends how the ODU was damaged? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Feb 1, 2011 at 6:01 PM, Eric Muehleisen ericm...@gmail.com wrote: We have

Re: [WISPA] AN-50e won't power on

2011-02-01 Thread Jon Auer
If all else fails, yank the power supply and use a different 24VDC PSU. See http://tapodi.net/~jda/an50dc/ for some ghetto hacking that I did a few years ago that might be relevant. Not that I'd recommended doing what I did. There should be a voltage regulator in there so you don't overvolt it if