|
Jason, It ought to work like a charm. It sounds
like maybe a bad gateway set in the BH unit or an Ethernet mismatch maybe or
even a port on a switch. Did you check that link on the ground and
pass data through it? Like surf the net before hanging them in the air???? Mac From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Hensley I'm current setup with a tower at my NOC
running Tranzeo 2.4, WDS with a Tranzeo 2.4 on a water tower
about 1/2 mile away, and then a Tranzeo 5.8 backhaul from the water tower
to a third POP about 8 miles away. No LOS from the NOC to the third
POP. The backhaul from the water tower to 3rd
tower is using TR-5a-24f's. Works great. 5a on the water tower is
in AP mode, 5a on the other POP is a client. Now, I need to get rid
of my WDS setup for obvious reasons. I can get good signal with
another TR-5a at the NOC to the 5a on the water tower. But, I can't seem
to get data to pass all the way from the third POP to the NOC. I'm
guessing that the AP being in the middle is causing this, correct? Everything
is bridged at this point. Can I make this work or am I going to have
to put another backhaul unit on the WT for a link between the NOC and
WT? Thanks! |
-- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
