Solutions
http://www.ics-il.com
- Original Message -
From: Tim Wolfe [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, May 30, 2007 8:29 AM
Subject: Re: [WISPA] Ethernet problems
I was reading this thread, and I had a thought (scary thing!, LOL
]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, May 30, 2007 8:29 AM
Subject: Re: [WISPA] Ethernet problems
I was reading this thread, and I had a thought (scary thing!, LOL), it
it possible that inside the conduit, there is a rough edge (maybe the
edge of a junction box if you
Sent: Tuesday, May 29, 2007 3:10 PM
Subject: [WISPA] Ethernet problems
I installed a customer in October and started having Ethernet problems in
March. I have an approximately 200' Ethernet run from the top of a TV
tower, to the house, and through the basement. I installed a Belden?
outdoor
Alan, I was an electrician for just about 30 years.
Drywallers with routers in their hands are one the most dangerous things .
George
Alan Cain wrote:
Tim Wolfe wrote:
I was reading this thread, and I had a thought (scary thing!, LOL), it
it possible that inside the conduit, there is a
What if you plug directly (or as direct as you can) into the Mikrotik CPE
with your laptop??
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Tuesday, May 29, 2007 4:11 PM
To: WISPA General List
Subject: [WISPA] Ethernet
' wireless@wispa.org
Sent: Wednesday, May 30, 2007 7:31 AM
Subject: RE: [WISPA] Ethernet problems
What if you plug directly (or as direct as you can) into the Mikrotik CPE
with your laptop??
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
) into the Mikrotik CPE
with your laptop??
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Tuesday, May 29, 2007 4:11 PM
To: WISPA General List
Subject: [WISPA] Ethernet problems
I installed a customer in October and started having
I installed a customer in October and started having Ethernet problems in
March. I have an approximately 200' Ethernet run from the top of a TV tower,
to the house, and through the basement. I installed a Belden? outdoor Cat5E
cable, a Mohawk outdoor gel cable, a rope for future cable
Subject: [WISPA] Ethernet problems
I installed a customer in October and started having Ethernet problems in
March. I have an approximately 200' Ethernet run from the top of a TV
tower, to the house, and through the basement. I installed a Belden?
outdoor Cat5E cable, a Mohawk outdoor gel cable
]
To: 'WISPA General List' wireless@wispa.org
Sent: Tuesday, May 29, 2007 3:22 PM
Subject: RE: [WISPA] Ethernet problems
Mike,
5
Is there 120v power running parallel to the cable? What else is on this
tower? Any high wattage RF transmitters? I have seen shielded cat5
interfered with to the point where
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Tuesday, May 29, 2007 4:37 PM
To: WISPA General List
Subject: Re: [WISPA] Ethernet problems
The only location where power might be parallel to the cable is in the
basement, but all of the power cables there (IIRC
o n a t h a n
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Rick Harnish
Sent: Tuesday, May 29, 2007 3:49 PM
To: 'WISPA General List'
Subject: RE: [WISPA] Ethernet problems
You should be able to find a supplier of ferrite beads on google
: [WISPA] Ethernet problems
You should be able to find a supplier of ferrite beads on google. They
are
relatively inexpensive and you may have some in your attic of inventory
that
you didn't even realize. It sounds like you have eliminated other
thoughts
I had.
What are the bumps at the end
, if any, it made.
Thanks,
. . . j o n a t h a n
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Tuesday, May 29, 2007 4:23 PM
To: WISPA General List
Subject: Re: [WISPA] Ethernet problems
I wondered how it discerns good RF from bad RF
, 2007 5:54 PM
Subject: RE: [WISPA] Ethernet problems
Mike, the ferrite snap-on is an inductance that prevents common mode RF,
of
any frequency you care about, from waltzing down the wire into your
system.
You just snap the hinged double-half-core onto the cable over the
insulation
so
Can you define Ethernet problem a little more.
No link lights, intermittent link, no data, small packet data only,
intermittent data?
My first thought is bad connector or bad port on a device. I have seen
hub ports that will look fine, do small packets fine, but don't try to
move a lot of
General List wireless@wispa.org
Sent: Tuesday, May 29, 2007 7:15 PM
Subject: Re: [WISPA] Ethernet problems
Can you define Ethernet problem a little more.
No link lights, intermittent link, no data, small packet data only,
intermittent data?
My first thought is bad connector or bad port
[EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Tuesday, May 29, 2007 1:48 PM
Subject: RE: [WISPA] Ethernet problems
You should be able to find a supplier of ferrite beads on google. They
are
relatively inexpensive and you may have some in your attic of inventory
that
you
18 matches
Mail list logo
