Re: [WISPA] MIMO antenna cabling...

2011-01-12 Thread Tom DeReggi
to crimp cables up on a roof without the need for a soldering iron. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: MDK To: WISPA General List Sent: Tuesday, January 11, 2011 2:16 PM Subject: [WISPA] MIMO antenna cabling

Re: [WISPA] MIMO antenna cabling...

2011-01-12 Thread Tom DeReggi
- Fixed Wireless Broadband - Original Message - From: Gino Villarini To: WISPA General List Sent: Tuesday, January 11, 2011 3:37 PM Subject: Re: [WISPA] MIMO antenna cabling... Beware of interference problems between the cards in the board Gino A. Villarini g

Re: [WISPA] MIMO antenna cabling...

2011-01-12 Thread Tom DeReggi
yet? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: MDK To: WISPA General List Sent: Tuesday, January 11, 2011 2:16 PM Subject: [WISPA] MIMO antenna cabling... I'm in the position of wanting to test the Star-OS MIMO

Re: [WISPA] MIMO antenna cabling...

2011-01-12 Thread MDK
Scanner software for Ncards yet? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: MDK To: WISPA General List Sent: Tuesday, January 11, 2011 2:16 PM Subject: [WISPA] MIMO antenna cabling... I'm in the position of wanting

[WISPA] MIMO antenna cabling...

2011-01-11 Thread MDK
I'm in the position of wanting to test the Star-OS MIMO mode, and it occurs to me that connecting an antenna through a few feet of cable may have some pitfalls... I'm going to use dual polarity antennas, and so I'm wondering if I need to use very closely matching cable lengths for the cables

Re: [WISPA] MIMO antenna cabling...

2011-01-11 Thread support
10ft in RF cable is a Bad Idea I would put you board in a weather proof box and put it next to your antennas On 1/11/2011 1:16 PM, MDK wrote: I'm in the position of wanting to test the Star-OS MIMO mode, and it occurs to me that connecting an antenna through a few feet of cable may have some

Re: [WISPA] MIMO antenna cabling...

2011-01-11 Thread Scott Reed
Why is 10' of cable a bad idea. I am not doing MIMO, but I have cables from 8 to 145' working just fine. And, the real question wasn't about using cables, but do they need to be the same length. Since MIMO is looking for the best signal and/or combining what is sees from

Re: [WISPA] MIMO antenna cabling...

2011-01-11 Thread MDK
: support Sent: Tuesday, January 11, 2011 11:51 AM To: WISPA General List Subject: Re: [WISPA] MIMO antenna cabling... 10ft in RF cable is a Bad Idea I would put you board in a weather proof box and put it next to your antennas On 1/11/2011 1:16 PM, MDK wrote: I'm in the position of wanting

Re: [WISPA] MIMO antenna cabling...

2011-01-11 Thread Gino Villarini
List Subject: Re: [WISPA] MIMO antenna cabling... I'm aware of cable loss issues, but in this case, that's just not an option. LMR-400 has low enough loss at 5 ghz that I don't see any big issue with using it, and the run really isn't all that long. The radio system is an ALIX mini-itx

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-08-03 Thread Fred Goldstein
At 8/3/2010 01:54 AM, Tom DeReggi wrote: Fred, The Arc Wireless dual pol panel is a great value with embedded genII enclosure. You have to use the enclosure for the mount to screw on to the antenna. You can still use cables to an external radios, its just that your cables are inside the

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-08-03 Thread Scott Carullo
BSF_SPF_SOFTFAIL Custom Rule SPF Softfail Subject: [WISPA] MIMO 5.8 GHz panel antennas? X-BeenThere: wireless@wispa.org X-Mailman-Version: 2.1.9 Precedence: list Reply-To: WISPA General List wireless@wispa.org List-Id: WISPA General List wireless.wispa.org List-Unsubscribe: http://lists.wispa.org

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-08-03 Thread Scott Carullo
2010 12:14:33 -0400 (EDT) X-Mailer: QUALCOMM Windows Eudora Version 7.1.0.9 Date: Fri, 30 Jul 2010 12:14:25 -0400 To: WISPA General List wireless@wispa.org From: Fred Goldstein fgoldst...@ionary.com In-Reply-To: 4c52f6d5.2030...@tc3net.com X-ASG-Orig-Subj: Re: [WISPA] MIMO 5.8 GHz panel antennas

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-08-02 Thread Tom DeReggi
Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? The trouble with the Powerbridge is that it has the radio built in, and is thus an Ethernet hop away from the switch (probably a Routerboard), and one more active device to manage. Also, since a Ubiquiti card drives the radio, it can only run

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-31 Thread Eric Merkel
General List Subject: Re: [WISPA] MIMO 5.8 GHz panel ... WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-31 Thread Eric Merkel
Woops hit send before I was done. We've had good luck with mt 4.10. Waiting for version 5 non-beta before ugrading but 5 looks promising. Eric On Jul 31, 2010 9:30 AM, Eric Merkel ejmerkel.li...@gmail.com wrote: We've had great success with mt running On Jul 30, 2010 1:08 PM, Steve

[WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Fred R. Goldstein
I wonder if any of you have experience with 5.8 GHz MIMO antennas. I'm trying to design a point-to-point link, about 10 miles, that will carry a high percentage of a whole network's backhaul. So I'd like it to go at about 80 Mbps, MCS 12 in 20 MHz. The UBNT SR71-15 card can plug into a

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Michael Baird
They have a Powerbridge M5 that includes a 25 db MIMO panel. Regards Michael Baird I wonder if any of you have experience with 5.8 GHz MIMO antennas. I'm trying to design a point-to-point link, about 10 miles, that will carry a high percentage of a whole network's backhaul. So I'd like it

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Steve Barnes
] On Behalf Of Michael Baird Sent: Friday, July 30, 2010 11:28 AM To: WISPA General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? They have a Powerbridge M5 that includes a 25 db MIMO panel. Regards Michael Baird I wonder if any of you have experience with 5.8 GHz MIMO antennas. I'm

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Michael Baird
) for the PowerBridge M5 link margin 14.4 Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Michael Baird Sent: Friday, July 30, 2010 11:28 AM To: WISPA General List Subject: Re: [WISPA] MIMO

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Fred Goldstein
To: WISPA General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? They have a Powerbridge M5 that includes a 25 db MIMO panel. Regards Michael Baird I wonder if any of you have experience with 5.8 GHz MIMO antennas. I'm trying to design a point-to-point link, about 10 miles

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Steve Barnes
General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? Yea, it's wrong. Try something besides MCS14 or MCS15 on their calculator, or a better link calculator. I've got NB22's with +25 deployed at 10 miles. Regards Michael Baird http://www.ubnt.com/linkcalculator/ Says that this would

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Steve Barnes
Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? The trouble with the Powerbridge is that it has the radio built in, and is thus an Ethernet hop away from the switch (probably a Routerboard), and one more active device to manage. Also, since a Ubiquiti card drives the radio, it can only run

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Fred Goldstein
: Friday, July 30, 2010 12:14 PM To: WISPA General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? The trouble with the Powerbridge is that it has the radio built in, and is thus an Ethernet hop away from the switch (probably a Routerboard), and one more active device to manage. Also, since

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Faisal Imtiaz
General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? They have a Powerbridge M5 that includes a 25 db MIMO panel. Regards Michael Baird I wonder if any of you have experience with 5.8 GHz MIMO antennas. I'm trying to design a point-to-point link, about 10 miles

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Steve Barnes
. Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Fred Goldstein Sent: Friday, July 30, 2010 12:43 PM To: WISPA General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? At 7/30/2010 12

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Josh Luthman
: [WISPA] MIMO 5.8 GHz panel ... WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] MIMO 5.8 GHz panel antennas?

2010-07-30 Thread Fred Goldstein
deal. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Fred Goldstein Sent: Friday, July 30, 2010 12:43 PM To: WISPA General List Subject: Re: [WISPA] MIMO 5.8 GHz panel antennas? At 7/30/2010 12:21 PM, Steve Barnes wrote: So you

[WISPA] MIMO

2006-04-11 Thread Peter R.
http://www.dslreports.com/shownews/73487 *Avoiding MIMO* /Professor warns: stick with 802.11g/ Posted 2006-04-10 13:22:06 Incorrectly advising users that new 802.11n gear won't work with old hotspots, an article in the Boston Globe

Re: [WISPA] MIMO

2006-04-11 Thread Jeromie Reeves
That guy needs to do more research. AirGo MIMO is far better then the other MIMO's products. Netgear dumped the majority of its older MIMO in lue of AirGo because of these reasons. Its pure misunderstanding about AirGo mimo not working with old hotspots. I bought a Pre-N card the week they came

[WISPA] MIMO

2005-12-11 Thread Paul Hendry
Just been doing a bit of work on the Atheros based Netgear WPN824. It's implementation of MIMO seems to work very well and I was wondering if anyone has started production on a NLOS outdoor AP based on MIMO yet. I wouldn't have thought it would be too difficult to attach some pigtails to the