Re: [WISPA] MT question

2010-08-10 Thread Josh Luthman 
My first bet is that you want this device to bridge (since the wlan1
and an ether are in a bridge) but you do not have WDS enabled and the
station is set to station-wds, which your AP is configured to do.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Aug 10, 2010 at 3:38 PM, Mike Delp  wrote:
> Few More Questions.
>
> Is Wireless card set to AP Bridge?  Can you put the card in Scan and see
> anything else?  Are the other devices in the scan list within the right
> signal levels?  If so, set the card back to ap Bridge and look for the ESSID
> on a laptop or other client device.
>
> If nothing shows in scan (and something should be there) then look at the
> possibility of the card not working.  If scan shows fine, then look further
> into the configuration of the wireless interface. R only shows when
> something is connected to it.  In the Wireless interface, click on Reset
> configuration and see if that clears the problem.
>
> Mike
>
> On Tue, Aug 10, 2010 at 1:22 PM, Forbes Mercy 
> wrote:
>>
>> You're basic 433 with an SR2, Winbox sees both but the "R" isn't by the
>> SR2.  We checked bridge then port and they're all set up right, there is
>> the hash mark next to the SR2 but they won't bridge traffic, no one
>> registers and field tests don't detect the radio.  So is it the board or
>> the SR2?
>>
>> Thanks,
>> Forbes
>>
>>
>>
>> 
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
>> 
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
> 
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> 
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] MT question

2010-08-10 Thread Mike Delp 
Few More Questions.

Is Wireless card set to AP Bridge?  Can you put the card in Scan and see
anything else?  Are the other devices in the scan list within the right
signal levels?  If so, set the card back to ap Bridge and look for the ESSID
on a laptop or other client device.

If nothing shows in scan (and something should be there) then look at the
possibility of the card not working.  If scan shows fine, then look further
into the configuration of the wireless interface. R only shows when
something is connected to it.  In the Wireless interface, click on Reset
configuration and see if that clears the problem.

Mike

On Tue, Aug 10, 2010 at 1:22 PM, Forbes Mercy
wrote:

> You're basic 433 with an SR2, Winbox sees both but the "R" isn't by the
> SR2.  We checked bridge then port and they're all set up right, there is
> the hash mark next to the SR2 but they won't bridge traffic, no one
> registers and field tests don't detect the radio.  So is it the board or
> the SR2?
>
> Thanks,
> Forbes
>
>
>
> 
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> 
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] MT question

2010-08-10 Thread Forbes Mercy 
Hmm now why didn't I think of that I knew better, I had better go 
test it myself.


On 8/10/2010 11:25 AM, Ryan Spott wrote:

Is anyone registered to that wireless interface?

If not, then the R shouldn't show up as it is not running until 
something is connected to it.


ryan

On Tue, Aug 10, 2010 at 11:22 AM, Forbes Mercy 
mailto:forbes.me...@wabroadband.com>> 
wrote:


You're basic 433 with an SR2, Winbox sees both but the "R" isn't
by the
SR2.  We checked bridge then port and they're all set up right,
there is
the hash mark next to the SR2 but they won't bridge traffic, no one
registers and field tests don't detect the radio.  So is it the
board or
the SR2?

Thanks,
Forbes




WISPA Wants You! Join today!
http://signup.wispa.org/



WISPA Wireless List: wireless@wispa.org 

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/






WISPA Wants You! Join today!
http://signup.wispa.org/


WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/





WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] MT question

2010-08-10 Thread Forbes Mercy 
AP and no WDS

On 8/10/2010 11:25 AM, Josh Luthman wrote:
> Is it a station or AP?
>
> Do you have WDS enabled?
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
>
> On Tue, Aug 10, 2010 at 2:22 PM, Forbes Mercy
>   wrote:
>
>> You're basic 433 with an SR2, Winbox sees both but the "R" isn't by the
>> SR2.  We checked bridge then port and they're all set up right, there is
>> the hash mark next to the SR2 but they won't bridge traffic, no one
>> registers and field tests don't detect the radio.  So is it the board or
>> the SR2?
>>
>> Thanks,
>> Forbes
>>
>>
>> 
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> 
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>  
>
> 
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> 
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>




WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] MT question

2010-08-10 Thread Josh Luthman 
Is it a station or AP?

Do you have WDS enabled?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Aug 10, 2010 at 2:22 PM, Forbes Mercy
 wrote:
> You're basic 433 with an SR2, Winbox sees both but the "R" isn't by the
> SR2.  We checked bridge then port and they're all set up right, there is
> the hash mark next to the SR2 but they won't bridge traffic, no one
> registers and field tests don't detect the radio.  So is it the board or
> the SR2?
>
> Thanks,
> Forbes
>
>
> 
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> 
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] MT question

2010-08-10 Thread Ryan Spott 
Is anyone registered to that wireless interface?

If not, then the R shouldn't show up as it is not running until something is
connected to it.

ryan

On Tue, Aug 10, 2010 at 11:22 AM, Forbes Mercy  wrote:

> You're basic 433 with an SR2, Winbox sees both but the "R" isn't by the
> SR2.  We checked bridge then port and they're all set up right, there is
> the hash mark next to the SR2 but they won't bridge traffic, no one
> registers and field tests don't detect the radio.  So is it the board or
> the SR2?
>
> Thanks,
> Forbes
>
>
>
> 
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> 
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] MT question

2010-08-10 Thread Forbes Mercy 
You're basic 433 with an SR2, Winbox sees both but the "R" isn't by the 
SR2.  We checked bridge then port and they're all set up right, there is 
the hash mark next to the SR2 but they won't bridge traffic, no one 
registers and field tests don't detect the radio.  So is it the board or 
the SR2?

Thanks,
Forbes



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/