Re: [WISPA] PTP Link Recommendations - The Future of WISPs
bridging end to end on networks. Its technologies like OSLR that are bringing hope back to routing for wireless. OSPF is not adequate anymore on its own. 2007 will be the year for network redesign. It will be the year that Telcos deploy Wi-Max on every cell tower to flood the air waves, buying into the dream of Super Cell PtMP that will not work to the level that they thought it would. It will be the science experiment that fails, and forces the Telcos to spend all their money, and it will be the time that it sperates the men from the boys in network design. The PTP Mesh, will be neededto allow providers to quickly adapt, so they can fight the war of spectrum claim, without the subscriber feeling the pain. The only way to fight mass scale WiMax is to use PTP smarter, and have more spaces to broadcast from. (Interference happens at Radio not in the air.), It will be the year that challenges WISP contracts that exist. It will be the year to learn how loyal property owners are to their contract with WISPs. It will be the year that the WISP with the BEST and MOST agreements with MTU property owners at the lowest cost, will have the upper hand to be able to afford to install the many PTP links needed to build the MESH above the cities. Its the year Muni will crash and Burn, when the world learns its not the street light poles that are needed, but the roof in the sky. Its the year that property owners will start to re-get inflated values of what their roof are worth, as more and more providers fight for the colocation. The first in, will ahve the upper hand, if they do their job right. It will be the year that companies like Trango Broadband shine, and release their new WiMax gear at industry low prices, and forcing other Wi-Max vendors to drop their pricing to compete. It will be the year that investment pays off, and value of assets get proven. It will be the year of acquisition, because everyone will want the first choice to buy the first in WISPs, as aquirers will learn the hard way how important the first-in WISP's assets are needed for optimized success. I tell you, its been a hard five years. And this next year is going to be the hardest year of all, and not for the weak at heart. But those that make it through it, will become the legends of the WISP movement, and either cash out because they are worn out, or become part of a dominient entity that rules the local wireless frontier. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Butch Evans [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, September 21, 2006 10:42 PM Subject: Re: [WISPA] PTP Link Recommendations On Thu, 21 Sep 2006, Tom DeReggi wrote: Just remember OSPF does not detect packet loss, and does not properly switch to backup channels or switches to frequently between channels on marginal links. So when you use two spectrum channels for 1 link, you double your chance that the link will get interference and degration. OSPF detecting packet loss? Switching channels? That's the job of the radios. OSPF will simply use the links, regardless of the channel or even type of radio. ANY FDX radio is going to be 2 radios (and therefore 2 channels). -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ Mikrotik Certified Consultant (http://www.mikrotik.com/consultants.html) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.6/453 - Release Date: 9/20/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] PTP Link Recommendations - The Future of WISPs
I don't know if you are right or wrong Tom...only time will tell...but I'm clapping! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Friday, September 22, 2006 2:15 PM To: WISPA General List Subject: Re: [WISPA] PTP Link Recommendations - The Future of WISPs Butch, I do not disagree with your statements. I'm jsut saying readers may misinterperete the post if my statements were not added. If the intend is to do FDX, Using OFDM to accomplish it is one easy way to do it. The question that I was challenging is in what cases FDX is appropriate. It can be risky to rely on two channels in a noisy environment. What happens if those channels develop interference? What channels would you move to? Anyone can get a good link on day one, but what is the plan for preventing future disasters? I'm starting to justify FDX now that 10Mhz channels are becoming available. Two 10Mhz channels has less risk and more options than one 20 Mhz channel. When we first got into this business, we really thought we were smart. We were trying all kind of neat things. But at the end of the day, we learned reasons why the rest of the world wasn't doing it already. Its humbling for me to admit that publically, but I'm a smarter person for realizing it. We were doing a lot with OFDM in the early years. The idea was to use two 10mbps Trangos on two freqs to reach 20 mbps. Sometimes Full Duplex, Some times bonded Half Duplex. The end result is the noise floor got to high, and it was to hard to move channels around, when needing to cater to what channel was deployed adjacent, taking up two channels for a single link. Selecting FDX might have meant not serving a particular direction. The problem is that when a channel gets packet loss, OSPF doesn't know what to do, when its up and when its down. We were setting up OSPF so that they took different paths with full duplex immulated but if one of the links went down, the second path (by OSPF) was the other channel converting it to half duplex in the emergency state. In general we deliver packet loss less links. But its not just a factor of the technology to accomplish that in noisy areas. Its strategy of the WISP. Using more spectrum for a task than one needs to, can be wasteful, and give WISPs less options for selecting the channels that will allow them to use radios that will prevent the packet loss. Again, excellent arguements have been made on this list, specifically by Matt Liotta and Lonnie, on how using 10Mhz channels or GPS syncing with Full Duplex for a link can actually be more spectrum efficient than 20Mhz channels in Half Duplex. In real world I have not seen that yet, but in theory it all made sense. Its actually those debates that got me thinking to start doing more PtP links on my network and attempting spectrum re-use, that I am now more effectively accomplishing. My general rule is Do you need 20 mbps for the link? Do you demand Full Duplex? If the answer to both of these question is yes, and it may be for dominately VOIP applications, then it may very well be worth using OSPF for FDX deployments. But there is risk in doing it. Because if I really only need 10 mbps, or can survive with half duplex, I'd rather know that if any of my links encounter interference, that it only takes down half the customers, not all the customers, because I have customers spread out across more radios. Having two radios operating independantly using half duplex, allows redundancy on the fly, when needed. My end of the day conclusion was, if in Rural or Licensed, go for it, but otherwise I wouldn't do FDX unless doing it with 10Mhz channel size. The exception to this is that when 5.4Ghz gear is legal, there are many more available channels where it is less risky to take two channels for a link. 5.4Ghz will be the spectrum that revolutionizes FDX and PTP links in Urban/Suburban America. 5.4Ghz is almost useless in PtMP on small sectors. But it allows PTP links to go 7 miles with margin. Can you think of it now, 10Mhz channels on 100% clear fresh spectrum on day 1, thats 50 new channels, including polarity. Or 25 new channels using smart Dual Pol NLOS antennas. It will be the year of 2 ft dishes, to go the distance with low power spectrum. 2007 will be the year of smart routing. Not MESH as the world typically knows as MESH, but MESH as the definition, a network with two paths or more. PTP reduces latency over PTMP systems, allowing more hops to deliver the same QOS. Networks will be designed to go to building to buidling more often. WISPS will start to install two antennas as a requirement for every new install. Networks will be run layers on top of each other in parallel, so customers have fewest number of hops to the transit locations, but so more buildings can be served. In other words it won't be one large mesh, it will be many small mesh segments, with engineered PTP paths. This is not a new idea
Re: [WISPA] PTP Link Recommendations - The Future of WISPs
On Fri, 22 Sep 2006, Tom DeReggi wrote: I'm jsut saying readers may misinterperete the post if my statements were not added. The parts that you added, though, were specifically related to the radio portion of the network (and you were correct there), but it has nothing to do with what we did (now 3 times) with OSPF. It was that part that I responded to. If the intend is to do FDX, Using OFDM to accomplish it is one easy way to do it. OFDM isn't full duplex, unless I'm sorely mistaken. The question that I was challenging is in what cases FDX is appropriate. It can be risky to rely on two channels in a noisy environment. What happens if those channels develop interference? What channels would you move to? Anyone can get a good link on day one, but what is the plan for preventing future disasters? This is actually a better question. The fact is, that MOST people who brag on their 10, 20, 50Mbps infrastructure don't need anywhere near that. In 2 of the cases where I built this type of setup, there was a real need that a FDX implementation solved. These were not ISPs, but a corporate install where they were doing VoIP among other things. The third one was an ISP and they had 2 links up and running (one in 5.8 and another in 2.4) and wanted to find a way to utilize these better (they were previously just bridged and STP was running). Two 10Mhz channels has less risk and more options than one 20 Mhz channel. This is obviously true and very spectrum conscious. Its humbling for me to admit that publically, but I'm a smarter person for realizing it. :-) I have a hard time admitting that I _could_ have _possibly_ been wrong. ;-) (I guess that's just human nature.) I tend to agree (a little) with the vision that you posted, but that's also a bit off the topic at hand. I guess you get the right to stray from the topic, being the long-timer that you are. :-) -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ Mikrotik Certified Consultant (http://www.mikrotik.com/consultants.html) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations - The Future of WISPs
If the intend is to do FDX, Using OFDM to accomplish it is one easy way to do it. OFDM isn't full duplex, unless I'm sorely mistaken. OOPs typo. MEant OSPF. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Butch Evans [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Friday, September 22, 2006 5:31 PM Subject: Re: [WISPA] PTP Link Recommendations - The Future of WISPs On Fri, 22 Sep 2006, Tom DeReggi wrote: I'm jsut saying readers may misinterperete the post if my statements were not added. The parts that you added, though, were specifically related to the radio portion of the network (and you were correct there), but it has nothing to do with what we did (now 3 times) with OSPF. It was that part that I responded to. If the intend is to do FDX, Using OFDM to accomplish it is one easy way to do it. OFDM isn't full duplex, unless I'm sorely mistaken. The question that I was challenging is in what cases FDX is appropriate. It can be risky to rely on two channels in a noisy environment. What happens if those channels develop interference? What channels would you move to? Anyone can get a good link on day one, but what is the plan for preventing future disasters? This is actually a better question. The fact is, that MOST people who brag on their 10, 20, 50Mbps infrastructure don't need anywhere near that. In 2 of the cases where I built this type of setup, there was a real need that a FDX implementation solved. These were not ISPs, but a corporate install where they were doing VoIP among other things. The third one was an ISP and they had 2 links up and running (one in 5.8 and another in 2.4) and wanted to find a way to utilize these better (they were previously just bridged and STP was running). Two 10Mhz channels has less risk and more options than one 20 Mhz channel. This is obviously true and very spectrum conscious. Its humbling for me to admit that publically, but I'm a smarter person for realizing it. :-) I have a hard time admitting that I _could_ have _possibly_ been wrong. ;-) (I guess that's just human nature.) I tend to agree (a little) with the vision that you posted, but that's also a bit off the topic at hand. I guess you get the right to stray from the topic, being the long-timer that you are. :-) -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ Mikrotik Certified Consultant (http://www.mikrotik.com/consultants.html) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] PTP Link Recommendations
I have a potential customer that is looking to replace a fiber link with wireless. Need best recommendation for a 1.5mile clear LOS shot. Bridge as it is to replace a fiber link that goes switch to switch. And probably 45Mbps would be good. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
Scott, P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. Travis Microserv Scott Reed wrote: I have a potential customer that is looking to replace a fiber link with wireless. Need best recommendation for a 1.5mile clear LOS shot. Bridge as it is to replace a fiber link that goes switch to switch. And probably 45Mbps would be good. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
Travis Johnson wrote: P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. As long as it doesn't rain. :) Seriously, I've got two pair of these, and while they're rock-solid most of the time, I do have a few issues with rain fade. Normal drizzle and light rain aren't a problem, but torrential pouring-down-buckets Katrina flashback rain will make the link drop for a few minutes. (The two links I have are about 1/2 mile and 1 1/2 miles, and the longer one is a bit more susceptible to rain fade. They're both running near or at the maximum legal transmit power, and have the highest-gain antennas I could find for that gear.) Also, to stay nice and legal, don't forget to factor in the license costs. (38GHz is licensed spectrum, but you can lease a license for $500 per link per year. Not a big cost, but something to keep in mind.) David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
This is what I would buy to replace a fiber in this case: http://www.alvarion.com/B100/?ref=wispabanner Scott Reed wrote: I have a potential customer that is looking to replace a fiber link with wireless. Need best recommendation for a 1.5mile clear LOS shot. Bridge as it is to replace a fiber link that goes switch to switch. And probably 45Mbps would be good. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net http://www.nwwnet.net/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.6/453 - Release Date: 9/20/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
David, What are your signal levels on each side (the actual RSSI using the management program)? Even at 1.5 miles, with 2ft dishes I show you should have a -26db RSSI and total downtime during a 1 year period of 7 minutes. (99.9% uptime). Travis Microserv David E. Smith wrote: Travis Johnson wrote: P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. As long as it doesn't rain. :) Seriously, I've got two pair of these, and while they're rock-solid most of the time, I do have a few issues with rain fade. Normal drizzle and light rain aren't a problem, but torrential pouring-down-buckets Katrina flashback rain will make the link drop for a few minutes. (The two links I have are about 1/2 mile and 1 1/2 miles, and the longer one is a bit more susceptible to rain fade. They're both running near or at the maximum legal transmit power, and have the highest-gain antennas I could find for that gear.) Also, to stay nice and legal, don't forget to factor in the license costs. (38GHz is licensed spectrum, but you can lease a license for $500 per link per year. Not a big cost, but something to keep in mind.) David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] PTP Link Recommendations
Depends on what rain zone hes in, but I agree that a 1.5 mile and certainly a .5 mile 38GHz shot should be a walk in the park. I expect alignment is the issue and hes probably lined up on a side lobe. We spend an inordinate amount of time aligning our 38GHz links. We also use very heavy mounts sometimes as large as 4 ID. Cant afford to have this stuff move. grin Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson Sent: Thursday, September 21, 2006 3:09 PM To: WISPA General List Subject: Re: [WISPA] PTP Link Recommendations David, What are your signal levels on each side (the actual RSSI using the management program)? Even at 1.5 miles, with 2ft dishes I show you should have a -26db RSSI and total downtime during a 1 year period of 7 minutes. (99.9% uptime). Travis Microserv David E. Smith wrote: Travis Johnson wrote: P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. As long as it doesn't rain. :)Seriously, I've got two pair of these, and while they're rock-solid mostof the time, I do have a few issues with rain fade. Normal drizzle andlight rain aren't a problem, but torrential pouring-down-buckets Katrinaflashback rain will make the link drop for a few minutes. (The two linksI have are about 1/2 mile and 1 1/2 miles, and the longer one is a bitmore susceptible to rain fade. They're both running near or at themaximum legal transmit power, and have the highest-gain antennas I couldfind for that gear.)Also, to stay nice and legal, don't forget to factor in the licensecosts. (38GHz is licensed spectrum, but you can lease a license for $500per link per year. Not a big cost, but something to keep in mind.)David SmithMVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
On Thu, September 21, 2006 3:09 pm, Travis Johnson wrote: What are your signal levels on each side (the actual RSSI using the management program)? I'd have to drive over to one end (or the other) to look, but IIRC, on that longer link, it shows a signal of about -40 or so. The link may actually be a bit longer than 1 1/2 miles; I don't have my Big Spreadsheet Full O' GPS Coordinates handy. It won't be longer than about 2 miles or so, though, because it's about a 2-mile drive, and I have to use roads ;) Even at 1.5 miles, with 2ft dishes I show you should have a -26db RSSI and total downtime during a 1 year period of 7 minutes. (99.9% uptime). Our total downtime on that link is probably about a half-hour so far this year, and the link does give you a consistent 45Mbps all the time when it works (which is most of the time, admittedly). Heck, most of the time, if it's raining hard enough to make the link drop, folks on one end or the other won't have power anyway because of the storm that brought said rain :) David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] PTP Link Recommendations
Certainly the B100 can and will probably get you about 70mbps at that range (City of New Orleans gets 80mbps from a short LOS link and AM gets over 60mbps sustained at 16 miles). It will also trunk over 1,000 concurrent VoIP sessions. Not too much money, especially for the value. Patrick From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Reed Sent: Thursday, September 21, 2006 1:34 PM To: WISPA General List Subject: Re: [WISPA] PTP Link Recommendations What about unlicensed? Anything that can do this link well? Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: David E. Smith [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thu, 21 Sep 2006 14:57:21 -0500 Subject: Re: [WISPA] PTP Link Recommendations Travis Johnson wrote: P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. As long as it doesn't rain. :) Seriously, I've got two pair of these, and while they're rock-solid most of the time, I do have a few issues with rain fade. Normal drizzle and light rain aren't a problem, but torrential pouring-down-buckets Katrina flashback rain will make the link drop for a few minutes. (The two links I have are about 1/2 mile and 1 1/2 miles, and the longer one is a bit more susceptible to rain fade. They're both running near or at the maximum legal transmit power, and have the highest-gain antennas I could find for that gear.) Also, to stay nice and legal, don't forget to factor in the license costs. (38GHz is licensed spectrum, but you can lease a license for $500 per link per year. Not a big cost, but something to keep in mind.) David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ --- End of Original Message --- This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses(192). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses(43). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
Scott, I think the biggest problem you will have when trying to replace a fiber line will be half-duplex vs. full-duplex. They are "used" to full-duplex... and 99% of the unlicensed equipment is only half-duplex. If you move to Orthogon or something that will do 200Mbps half-duplex, you should be fine... but you are talking a LOT more money than the 38ghz stuff. ;) Travis Microserv Scott Reed wrote: What about unlicensed? Anything that can do this link well? Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: "David E. Smith" [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thu, 21 Sep 2006 14:57:21 -0500 Subject: Re: [WISPA] PTP Link Recommendations Travis Johnson wrote: P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. As long as it doesn't rain. :) Seriously, I've got two pair of these, and while they're rock-solid most of the time, I do have a few issues with rain fade. Normal drizzle and light rain aren't a problem, but torrential pouring-down-buckets Katrina flashback rain will make the link drop for a few minutes. (The two links I have are about 1/2 mile and 1 1/2 miles, and the longer one is a bit more susceptible to rain fade. They're both running near or at the maximum legal transmit power, and have the highest-gain antennas I could find for that gear.) Also, to stay nice and legal, don't forget to factor in the license costs. (38GHz is licensed spectrum, but you can lease a license for $500 per link per year. Not a big cost, but something to keep in mind.) David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ --- End of Original Message --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
I've heard of some folks using an OSPF router on both ends and two hdx backhaul radios to simulate FDD, with excellent results. Added benefit of having a backup link already in place if one radio fails. I will be trying this on my next set of backhaul deployments. Matt Larsen [EMAIL PROTECTED] Travis Johnson wrote: Scott, I think the biggest problem you will have when trying to replace a fiber line will be half-duplex vs. full-duplex. They are used to full-duplex... and 99% of the unlicensed equipment is only half-duplex. If you move to Orthogon or something that will do 200Mbps half-duplex, you should be fine... but you are talking a LOT more money than the 38ghz stuff. ;) Travis Microserv Scott Reed wrote: What about unlicensed? Anything that can do this link well? Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net http://www.nwwnet.net/ *-- Original Message ---* From: David E. Smith [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thu, 21 Sep 2006 14:57:21 -0500 Subject: Re: [WISPA] PTP Link Recommendations Travis Johnson wrote: P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps full-duplex (90Mbps total). Total equipment cost less than $3,000. Check on ebay. As long as it doesn't rain. :) Seriously, I've got two pair of these, and while they're rock-solid most of the time, I do have a few issues with rain fade. Normal drizzle and light rain aren't a problem, but torrential pouring-down-buckets Katrina flashback rain will make the link drop for a few minutes. (The two links I have are about 1/2 mile and 1 1/2 miles, and the longer one is a bit more susceptible to rain fade. They're both running near or at the maximum legal transmit power, and have the highest-gain antennas I could find for that gear.) Also, to stay nice and legal, don't forget to factor in the license costs. (38GHz is licensed spectrum, but you can lease a license for $500 per link per year. Not a big cost, but something to keep in mind.) David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ *--- End of Original Message ---* -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
On Thu, 21 Sep 2006, Matt Larsen - Lists wrote: I've heard of some folks using an OSPF router on both ends and two hdx backhaul radios to simulate FDD, with excellent results. Added benefit of having a backup link already in place if one radio fails. I will be trying this on my next set of backhaul deployments. I have done this. All you need is 2 radio links with ethernet ports, a couple of Mikrotik (preferred) boxes and a few minutes beyond getting the links up and running. A 100Mbps HDX link becomes a 100Mbps FDX link for just a little more than twice the price of the HDX link. The nice thing is, you can add more links and you have the ability to add even more bandwidth. Depending on whether you what you use for the radio links, you can do this very inexpensively. -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ Mikrotik Certified Consultant (http://www.mikrotik.com/consultants.html) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
Just remember OSPF does not detect packet loss, and does not properly switch to backup channels or switches to frequently between channels on marginal links. So when you use two spectrum channels for 1 link, you double your chance that the link will get interference and degration. Going two 10mhz channels, however, reduces the risk equivellent to one 20 mhz channel. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Butch Evans [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, September 21, 2006 5:52 PM Subject: Re: [WISPA] PTP Link Recommendations On Thu, 21 Sep 2006, Matt Larsen - Lists wrote: I've heard of some folks using an OSPF router on both ends and two hdx backhaul radios to simulate FDD, with excellent results. Added benefit of having a backup link already in place if one radio fails. I will be trying this on my next set of backhaul deployments. I have done this. All you need is 2 radio links with ethernet ports, a couple of Mikrotik (preferred) boxes and a few minutes beyond getting the links up and running. A 100Mbps HDX link becomes a 100Mbps FDX link for just a little more than twice the price of the HDX link. The nice thing is, you can add more links and you have the ability to add even more bandwidth. Depending on whether you what you use for the radio links, you can do this very inexpensively. -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ Mikrotik Certified Consultant (http://www.mikrotik.com/consultants.html) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.6/453 - Release Date: 9/20/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] PTP Link Recommendations
On Thu, 21 Sep 2006, Tom DeReggi wrote: Just remember OSPF does not detect packet loss, and does not properly switch to backup channels or switches to frequently between channels on marginal links. So when you use two spectrum channels for 1 link, you double your chance that the link will get interference and degration. OSPF detecting packet loss? Switching channels? That's the job of the radios. OSPF will simply use the links, regardless of the channel or even type of radio. ANY FDX radio is going to be 2 radios (and therefore 2 channels). -- Butch Evans Network Engineering and Security Consulting 573-276-2879 http://www.butchevans.com/ Mikrotik Certified Consultant (http://www.mikrotik.com/consultants.html) -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/