this and
putting an 18V power supply seem to resolve the problem.
/ Eje
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Saturday, November 17, 2007 3:51 PM
To: WISPA General List
Subject: Re: [WISPA] PowerStation2 Problem
Replace the unit.
I've
If it is the ethernet side I would check the ethernet cabling to make
sure you didn't kink it when stringing the wire or got a bad end on it.
Also depending on what you are plugging the ethernet into you may want
to turn off auto negotiate or set the rate manually if you have the
capability
- Original Message -
From: Andrew Niemantsverdriet [EMAIL PROTECTED]
To: wireless@wispa.org
Sent: Friday, November 16, 2007 4:22 PM
Subject: [WISPA] PowerStation2 Problem
I have a Ubiquiti PowerStaion2 that is having some weird issues. It
has a -68 signal and good LOS to the AP
]
To: wireless@wispa.org
Sent: Friday, November 16, 2007 4:22 PM
Subject: [WISPA] PowerStation2 Problem
I have a Ubiquiti PowerStaion2 that is having some weird issues. It
has a -68 signal and good LOS to the AP however there is packet loss
on the link but only from the Ethernet side of it. From
---RJ45---LS2 ---wireless-any AP--RJ45--PC2
Kevin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer
Sent: Sunday, November 18, 2007 12:33 AM
To: WISPA General List
Subject: Re: [WISPA] PowerStation2 Problem
Bad radio
Replace the unit.
I've seen 2 like that.
Sam Tetherow wrote:
If it is the ethernet side I would check the ethernet cabling to make
sure you didn't kink it when stringing the wire or got a bad end on it.
Also depending on what you are plugging the ethernet into you may want
to turn off
I have a Ubiquiti PowerStaion2 that is having some weird issues. It
has a -68 signal and good LOS to the AP however there is packet loss
on the link but only from the Ethernet side of it. From the radio side
(pinging from the gateway) I see no such loss. The Ethernet drops from
10-30 seconds and
Subject: [WISPA] PowerStation2 Problem
I have a Ubiquiti PowerStaion2 that is having some weird issues. It
has a -68 signal and good LOS to the AP however there is packet loss
on the link but only from the Ethernet side of it. From the radio side
(pinging from the gateway) I see no such loss