Hey Guys,
I am trying to build some super cheap backhauls. How much traffic could
I pass with the 133 and a couple of sr5, and would I want a level 3 or 4
lic?
Thanks,
Brian
Would you like to see your
12-15 meg.. depending on rules, connection tracking off may get you more.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
Hey Guys,
I am trying to build some super cheap backhauls. How much traffic could
I pass with the 133 and a couple of sr5, and would I want a level 3 or 4
lic?
@wispa.org
Sent: Friday, July 20, 2007 11:17 AM
Subject: Re: [WISPA] RB 133c
12-15 meg.. depending on rules, connection tracking off may get you more.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
Hey Guys,
I am trying to build some super cheap backhauls. How much traffic could
I pass
Message - From: Dennis Burgess
[EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, July 20, 2007 11:17 AM
Subject: Re: [WISPA] RB 133c
12-15 meg.. depending on rules, connection tracking off may get you
more.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote
Tranzeo isn't cheap when you consider the failure rate.
Chris
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Ralph
Sent: Friday, July 20, 2007 1:09 PM
To: 'WISPA General List'
Subject: RE: [WISPA] RB 133c
Why not use a couple or Tranzeos or Deliberants
like a Linksys or other low duty device.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of JohnnyO
Sent: Friday, July 20, 2007 11:52 AM
To: WISPA General List
Subject: Re: [WISPA] RB 133c
Don't use 133s for backhauls. You will NOT get 12meg-15meg We
utilization at 6meg with very very
little else going on other then traffic.
JohnnyO
- Original Message - From: Dennis Burgess
[EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, July 20, 2007 11:17 AM
Subject: Re: [WISPA] RB 133c
12-15 meg.. depending on rules
PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, July 20, 2007 9:57 AM
Subject: Re: [WISPA] RB 133c
6 meg would do. I would install a higher cpu unit later.
Brian
JohnnyO wrote:
Don't use 133s for backhauls. You will NOT get 12meg-15meg We have
a 133 in place
Brian,
Use the RB 532 or 532A. Little more expensive, but I get 20 Mbit/sec +
thru them in a PtMP setup on 5.8GHz with sr5 or xr5 cards.
Brian Rohrbacher wrote:
Hey Guys,
I am trying to build some super cheap backhauls. How much traffic
could I pass with the 133 and a couple of sr5, and
: Dennis Burgess
[EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, July 20, 2007 11:17 AM
Subject: Re: [WISPA] RB 133c
12-15 meg.. depending on rules, connection tracking off may get
you more.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
Hey Guys,
I am trying
Ya, but it's an extra $280 per link, times 10. It's that $2800 I don't
have now.
Blair Davis wrote:
Brian,
Use the RB 532 or 532A. Little more expensive, but I get 20 Mbit/sec
+ thru them in a PtMP setup on 5.8GHz with sr5 or xr5 cards.
Brian Rohrbacher wrote:
Hey Guys,
I am
There are RB 600s, and 1000s coming out. the 600s with the daughterboard
looks the most promising I still have no ETA on any of them though.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
Ya, but it's an extra $280 per link, times 10. It's that $2800 I don't
have now.
Blair
Which is why I don't want to invest more than $59 into a board today.
Brian
Dennis Burgess wrote:
There are RB 600s, and 1000s coming out. the 600s with the daughterboard
looks the most promising I still have no ETA on any of them though.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED]
Would 600 and 1000 mean mhz? Where would a guy find specs for these new
boards?
Brian
Dennis Burgess wrote:
There are RB 600s, and 1000s coming out. the 600s with the daughterboard
looks the most promising I still have no ETA on any of them though.
On 7/20/07, Brian Rohrbacher [EMAIL
I was just told by one of my suppliers that the RB 532 and 532A are
being end of life'ed in favor of the RB 600...
Hope that the 600 will fit in the same NEMA boxes I use.
Blair
Dennis Burgess wrote:
There are RB 600s, and 1000s coming out. the 600s with the daughterboard
looks the most
no it will not. It is a much bigger board!
On 7/20/07, Blair Davis [EMAIL PROTECTED] wrote:
I was just told by one of my suppliers that the RB 532 and 532A are
being end of life'ed in favor of the RB 600...
Hope that the 600 will fit in the same NEMA boxes I use.
Blair
Dennis Burgess
No, visit http://www.mikrotikconsulting.com and hit the blog, there is a
link there with information on them.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
Would 600 and 1000 mean mhz? Where would a guy find specs for these new
boards?
Brian
Dennis Burgess wrote:
There are RB
I looked on the blog, but didn't see how big they would be. I need to
make sure I have big enough enclosures. Anyone have any ideas on
enclosures.
Brian
Dennis Burgess wrote:
No, visit http://www.mikrotikconsulting.com and hit the blog, there is a
link there with information on them.
On
http://www.hyperlinktechnologies.com/
Do I need to get a spoon??
Happy Friday everyone.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
I looked on the blog, but didn't see how big they would be. I need to
make sure I have big enough enclosures. Anyone have any ideas on
enclosures.
m fod says homer
Zack Kneisley wrote:
http://www.hyperlinktechnologies.com/
Do I need to get a spoon??
Happy Friday everyone.
On 7/20/07, Brian Rohrbacher [EMAIL PROTECTED] wrote:
I looked on the blog, but didn't see how big they would be. I need to
make sure I have big
PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, July 20, 2007 1:09 PM
Subject: Re: [WISPA] RB 133c
I plan on using a big enough enclosure to put whatever radio in there I
need to in the future, but for now, it looks like a $59 rb will do. I also
will be using some dual pol
21 matches
Mail list logo
