Re: [WISPA] Repeater

2010-06-10 Thread Marlon K. Schafer
General List wireless@wispa.org Sent: Wednesday, June 09, 2010 8:51 PM Subject: Re: [WISPA] Repeater So it could work on a licensed or ham radio link that is pumping out 50+ watts? On Wed, Jun 9, 2010 at 7:38 PM, Marlon K. Schafer o...@odessaoffice.com wrote: I've tried it a couple of times

Re: [WISPA] Repeater

2010-06-10 Thread Greg Ihnen
, June 09, 2010 8:51 PM Subject: Re: [WISPA] Repeater So it could work on a licensed or ham radio link that is pumping out 50+ watts? On Wed, Jun 9, 2010 at 7:38 PM, Marlon K. Schafer o...@odessaoffice.com wrote: I've tried it a couple of times and never had enough signal to make

Re: [WISPA] Repeater

2010-06-09 Thread Marlon K. Schafer
Steve, marlon - Original Message - From: Steve Barnes st...@pcswin.com To: WISPA General List wireless@wispa.org Sent: Monday, June 07, 2010 7:00 AM Subject: [WISPA] Repeater I have avoided repeaters like the plague but I have a situation where I have one and I am looking for a better

Re: [WISPA] Repeater

2010-06-09 Thread RickG
, June 07, 2010 7:00 AM Subject: [WISPA] Repeater I have avoided repeaters like the plague but I have a situation where I have one and I am looking for a better option.  When I started my wisp I was 100% Tranzeo.  At this one location I setup a CPE connected to a TR-6000 that has 2 Ethernet ports

Re: [WISPA] Repeater

2010-06-09 Thread Marlon K. Schafer
Barnes st...@pcswin.com To: WISPA General List wireless@wispa.org Sent: Monday, June 07, 2010 1:43 PM Subject: Re: [WISPA] Repeater Ok I have never even thought about doing this. Does it actually work? This sounds WAY to simple. A 29Db Grid on a Grain Leg pointed at the AP that has a -68

Re: [WISPA] Repeater

2010-06-09 Thread Marlon K. Schafer
Nope. But my 1 sub customer's have! grin marlon - Original Message - From: RickG rgunder...@gmail.com To: WISPA General List wireless@wispa.org Sent: Wednesday, June 09, 2010 5:32 PM Subject: Re: [WISPA] Repeater The question then becomes, would you spend $800 for a one sub repeater

Re: [WISPA] Repeater

2010-06-09 Thread Philip Dorr
still only see a receive signal of about -114. Near as I can tell this only works well if you have a LOT of power. marlon - Original Message - From: Steve Barnes st...@pcswin.com To: WISPA General List wireless@wispa.org Sent: Monday, June 07, 2010 1:43 PM Subject: Re: [WISPA] Repeater

Re: [WISPA] Repeater

2010-06-08 Thread Steve Barnes
RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mike Sent: Tuesday, June 08, 2010 12:03 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater You are absolutely right. A quarter wave feed line

Re: [WISPA] Repeater

2010-06-08 Thread Mark Dueck
Of Mike Sent: Tuesday, June 08, 2010 12:03 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater You are absolutely right. A quarter wave feed line is an impedance inverter. If my 1/4 wave multiples were even numbered the same effect would be found. (2 x 1/4 wave = half wave) A half wave feed

Re: [WISPA] Repeater

2010-06-08 Thread Philip Dorr
, 2010 12:03 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater You are absolutely right. A quarter wave feed line is an impedance inverter. If my 1/4 wave multiples were even numbered the same effect would be found. (2 x 1/4 wave = half wave) A half wave feed is an impedance repeater.  I

Re: [WISPA] Repeater

2010-06-08 Thread Steve Barnes
to me? Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark Dueck Sent: Tuesday, June 08, 2010 9:06 AM To: wireless@wispa.org Subject: Re: [WISPA] Repeater I think something like

Re: [WISPA] Repeater

2010-06-08 Thread Mike
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Philip Dorr Sent: Tuesday, June 08, 2010 8:14 AM To: WISPA General List Subject: Re: [WISPA] Repeater On Tue, Jun 8, 2010 at 7:32 AM, Steve Barnes st...@pcswin.com wrote: So with two 2.4 24 dbi Grid

Re: [WISPA] Repeater

2010-06-08 Thread Greg Ihnen
Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark Dueck Sent: Tuesday, June 08, 2010 9:06 AM To: wireless@wispa.org Subject: Re: [WISPA] Repeater I think something like this would help: http

[WISPA] Repeater

2010-06-07 Thread Steve Barnes
I have avoided repeaters like the plague but I have a situation where I have one and I am looking for a better option. When I started my wisp I was 100% Tranzeo. At this one location I setup a CPE connected to a TR-6000 that has 2 Ethernet ports that pass through POE. I ran 1 Ethernet up the

Re: [WISPA] Repeater

2010-06-07 Thread Jason Hensley
Get a Deliberant AP Duo. $350 and no hassle. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 9:01 AM To: WISPA General List Subject: [WISPA] Repeater I have avoided repeaters like the plague

Re: [WISPA] Repeater

2010-06-07 Thread Mike
: Monday, June 07, 2010 9:01 AM To: WISPA General List Subject: [WISPA] Repeater I have avoided repeaters like the plague but I have a situation where I have one and I am looking for a better option. When I started my wisp I was 100% Tranzeo. At this one location I setup a CPE connected to a TR

Re: [WISPA] Repeater

2010-06-07 Thread Steve Barnes
...@wispa.org] On Behalf Of Jason Hensley Sent: Monday, June 07, 2010 9:56 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater Get a Deliberant AP Duo. $350 and no hassle. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater Get a Deliberant AP Duo.  $350 and no hassle. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 9:01 AM To: WISPA General List

Re: [WISPA] Repeater

2010-06-07 Thread Jeromie Reeves
, 2010 9:56 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater Get a Deliberant AP Duo.  $350 and no hassle. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 9:01 AM To: WISPA

Re: [WISPA] Repeater

2010-06-07 Thread Chuck Hogg
-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 10:01 AM To: WISPA General List Subject: [WISPA] Repeater I have avoided repeaters like the plague but I have a situation where I have one and I am looking for a better option. When I started

Re: [WISPA] Repeater

2010-06-07 Thread Jason Hensley
Subject: Re: [WISPA] Repeater Thanks for the advice guys on the Deliberant. However, Last thing I really want to do is learn another radio system. Really hoping for a MT or UBNT option. Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] Repeater

2010-06-07 Thread Steve Barnes
Subject: Re: [WISPA] Repeater Steve: I don't think you're going to get much cheaper than what you said below, but here's a try. Nanostation M/Nanostation Loco M for the AP, Bullet/Nano for the Backhaul. The Nanostation M's have a software enabled POE 2nd port. Run one cable up, then Port 2 POE

Re: [WISPA] Repeater

2010-06-07 Thread Mike
specs perfectly. Friendly Regards, Mike -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 9:24 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks for the advice guys

Re: [WISPA] Repeater

2010-06-07 Thread Chuck Hogg
...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 10:47 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks Chuck you also forgot $100 for Antennas on the MT system. Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] Repeater

2010-06-07 Thread John Thomas
Of Jason Hensley Sent: Monday, June 07, 2010 9:56 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater Get a Deliberant AP Duo.  $350 and no hassle. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jason Hensley Sent: Monday, June 07, 2010 9:56 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater Get a Deliberant AP Duo.  $350 and no hassle

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
Luthman Sent: Monday, June 07, 2010 10:51 AM To: WISPA General List Subject: Re: [WISPA] Repeater John Thomas - three emails have been blank in the last few minutes. What's wrong with the Loco antennas?  They're 8 and 13dbi for 2.4 and 5Ghz (I think). Josh Luthman Office: 937-552-2340

Re: [WISPA] Repeater

2010-06-07 Thread John Thomas
[mailto:wireless-boun...@wispa.org] On Behalf Of Jason Hensley Sent: Monday, June 07, 2010 9:56 AM To: 'WISPA General List' Subject: Re: [WISPA] Repeater Get a Deliberant AP Duo.  $350 and no hassle. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org

Re: [WISPA] Repeater

2010-06-07 Thread Steve Barnes
General List Subject: Re: [WISPA] Repeater .e ww.sa xs,cssx. Z. Josh Luthman j...@imaginenetworksllc.com wrote: Issue I see is that not many other units, UBNT or MT have a 2nd Ethernet that pass through POE? Not to my knowledge. I've always done two lines up the tower

Re: [WISPA] Repeater

2010-06-07 Thread Tom DeReggi
, 2010 10:35 AM Subject: Re: [WISPA] Repeater There is next to no learning curve on the Deliberant if you know networking and wireless at all. It's an easy web interface and has full SSH access too if you like that route. I highly recommend it. So much easier than putting two radios up

Re: [WISPA] Repeater

2010-06-07 Thread Jason Hensley
List Subject: Re: [WISPA] Repeater So What software do they have running on the Deliberant Quads/Duos units now? Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Jason Hensley ja...@jaggartech.com To: 'WISPA General List' wireless

Re: [WISPA] Repeater

2010-06-07 Thread Jerry Richardson
UBNT rockets have a second Ethernet port -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 7:24 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks for the advice guys

Re: [WISPA] Repeater

2010-06-07 Thread Philip Dorr
[mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 7:24 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks for the advice guys on the Deliberant.  However,  Last thing I really want to do is learn another radio system. Really hoping for a MT

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 7:24 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks for the advice guys on the Deliberant.  However,  Last thing I really want to do

Re: [WISPA] Repeater

2010-06-07 Thread Jeromie Reeves
...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 7:24 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks for the advice guys on the Deliberant.  However,  Last thing I really want to do is learn another radio system. Really hoping for a MT or UBNT option

Re: [WISPA] Repeater

2010-06-07 Thread RickG
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Chuck Hogg Sent: Monday, June 07, 2010 10:38 AM To: WISPA General List Subject: Re: [WISPA] Repeater Steve: I don't think you're going to get much cheaper than what you said below, but here's a try. Nanostation M

Re: [WISPA] Repeater

2010-06-07 Thread Jeromie Reeves
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Chuck Hogg Sent: Monday, June 07, 2010 10:38 AM To: WISPA General List Subject: Re: [WISPA] Repeater Steve: I don't think you're going to get much cheaper than what you said below

Re: [WISPA] Repeater

2010-06-07 Thread Jason Hensley
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Chuck Hogg Sent: Monday, June 07, 2010 10:38 AM To: WISPA General List Subject: Re: [WISPA] Repeater Steve: I don't think you're going to get much cheaper than what you said below

Re: [WISPA] Repeater

2010-06-07 Thread Tom DeReggi
Message - From: Jerry Richardson jrichard...@aircloud.com To: WISPA General List wireless@wispa.org Sent: Monday, June 07, 2010 11:30 AM Subject: Re: [WISPA] Repeater UBNT rockets have a second Ethernet port -Original Message- From: wireless-boun...@wispa.org [mailto:wireless

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Jerry Richardson jrichard...@aircloud.com To: WISPA General List wireless@wispa.org Sent: Monday, June 07, 2010 11:30 AM Subject: Re: [WISPA] Repeater UBNT rockets have a second Ethernet port

Re: [WISPA] Repeater

2010-06-07 Thread Rubens Kuhl
One option to consider is a passive repeater. Wire a coax cable between the two dishes and you are done... no electronics to fail, no power to supply on a remote location. (haven't tested this trick with dual polarity, though) Rubens On Mon, Jun 7, 2010 at 11:00 AM, Steve Barnes

Re: [WISPA] Repeater

2010-06-07 Thread Steve Barnes
at the house? Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Rubens Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider is a passive repeater. Wire a coax cable between the two dishes and you are done... no electronics to fail, no power to supply on a remote location. (haven't tested

Re: [WISPA] Repeater

2010-06-07 Thread Bob Moldashel
...@wispa.org] On Behalf Of Rubens Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider is a passive repeater. Wire a coax cable between the two dishes and you are done... no electronics to fail, no power to supply on a remote

Re: [WISPA] Repeater

2010-06-07 Thread Josh Luthman
-boun...@wispa.org] On Behalf Of Rubens Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider is a passive repeater. Wire a coax cable between the two dishes and you are done... no electronics to fail, no power to supply

Re: [WISPA] Repeater

2010-06-07 Thread Rubens Kuhl
, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider is a passive repeater. Wire a coax cable between the two dishes and you are done... no electronics to fail, no power to supply on a remote location. (haven't tested this trick with dual

Re: [WISPA] Repeater

2010-06-07 Thread Bob Moldashel
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Rubens Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider is a passive repeater. Wire a coax cable between the two

Re: [WISPA] Repeater

2010-06-07 Thread Greg Ihnen
on the back side at the house? Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Rubens Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater

Re: [WISPA] Repeater

2010-06-07 Thread Jack Unger
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Rubens Kuhl Sent: Monday, June 07, 2010 4:20 PM To: WISPA General List Subject: Re: [WISPA] Repeater One option to consider is a passive repeater. Wire a coax cable between the two dishes and you

Re: [WISPA] Repeater

2010-06-07 Thread Matt Jenkins
. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, June 07, 2010 9:24 AM To: WISPA General List Subject: Re: [WISPA] Repeater Thanks for the advice guys on the Deliberant. However, Last thing I really

Re: [WISPA] Repeater

2010-06-07 Thread Mike
To: WISPA General List Subject: Re: [WISPA] Repeater For this to work, one end needs to be very short. In a typical mountain-top repeat situation, the combined free-space path loss from BOTH paths is more than enough to prevent the link from working. Greg Ihnen wrote: Actually I've done

Re: [WISPA] Repeater

2010-06-07 Thread Greg Ihnen
: Monday, June 07, 2010 5:21 PM To: WISPA General List Subject: Re: [WISPA] Repeater For this to work, one end needs to be very short. In a typical mountain-top repeat situation, the combined free-space path loss from BOTH paths is more than enough to prevent the link from working. Greg Ihnen

Re: [WISPA] Repeater

2010-06-07 Thread Mike
test it. :-) Friendly Regards, Mike -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Monday, June 07, 2010 10:17 PM To: WISPA General List Subject: Re: [WISPA] Repeater My understanding is that a half wavelength long

[WISPA] Repeater pictures....

2008-09-11 Thread D. Ryan Spott
I am looking for pictures of remote rocky outcrop repeaters. I have the opportunity to stick a repeater on a very remote and small rocky outcrop. I am looking at placing 3 16-20 foot tilt-over masts at this location to service a large swath of customers. My biggest question is anchoring (big

Re: [WISPA] Repeater pictures....

2008-09-11 Thread Jack Unger
Ryan, Non-pen roof mount with a lot of cinder blocks will make it real easy for your site to be re-configured at 3 AM by unknown persons. jack D. Ryan Spott wrote: I am looking for pictures of remote rocky outcrop repeaters. I have the opportunity to stick a repeater on a very remote and