Re: [WISPA] Suggestions - paint overspray on solar panels

2009-11-02 Thread Marco Coelho
Water companies usually use a very special paint (very fluid with odd
chemical comp).  You should first contact their contractor and find
out what the recommended solvent for their paint is.

Then call the panel manufacturers to ensure that the solvent won't
damage their panels.

Might save you some $ and a climb or two.

Marco



On Fri, Oct 30, 2009 at 10:55 AM, Jerry Richardson
jrichard...@aircloud.com wrote:
 I have a black glass stove - plastic pot scrubber scratched the hell out of 
 it.

 Soft bristle brush would be safer. You could get a car wash brush with a long 
 handle - should make it easier to reach across the panels.

 -Original Message-
 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
 Behalf Of Randy Cosby
 Sent: Friday, October 30, 2009 7:59 AM
 To: WISPA General List
 Subject: Re: [WISPA] Suggestions - paint overspray on solar panels

 Thanks, I think I'll give this a try first, maybe try a plastic pot
 scrubber with it.

 Randy


 Jerry Richardson wrote:
 It's likely water base in which warm soapy water and a squeeqee will 
 suffice. Don't use anything abrasive.

 If it's oil base, it may still come off with warm soapy water as it 
 overspray tends to be partially dry by the time it lands.

 Try not to scrape as it leaves small scratches that catch pollen and dust.



 -Original Message-
 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
 Behalf Of Randy Cosby
 Sent: Thursday, October 29, 2009 1:51 PM
 To: WISPA General List
 Subject: [WISPA] Suggestions - paint overspray on solar panels

 I have a couple solar panels on a water tank.  A few months ago the
 water company painted the tank, and obviously didn't cover our panels
 the whole time, so there is a very thin layer of paint on them.

 Not sure what kind of paint it is, but I can scratch it off with my
 fingernails.  I don't have enough fingernails to do all the panels
 though

 Any suggestions on what to use to take that off without damaging the
 solar panels?  I'm sure they'll work better without brown specs all over
 them.




 --
 Randy Cosby
 Vice President
 InfoWest, Inc

 435-674-0165 x 2010

 http://www.infowest.com/




 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/


 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/




-- 
Marco C. Coelho
Argon Technologies Inc.
POB 875
Greenville, TX 75403-0875
903-455-5036



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-30 Thread Kurt Fankhauser
Lacquer thinner???



Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
 
 
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jerry Richardson
Sent: Thursday, October 29, 2009 7:37 PM
To: WISPA General List
Subject: Re: [WISPA] Suggestions - paint overspray on solar panels

It's likely water base in which warm soapy water and a squeeqee will
suffice. Don't use anything abrasive.

If it's oil base, it may still come off with warm soapy water as it
overspray tends to be partially dry by the time it lands.

Try not to scrape as it leaves small scratches that catch pollen and dust.



-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Randy Cosby
Sent: Thursday, October 29, 2009 1:51 PM
To: WISPA General List
Subject: [WISPA] Suggestions - paint overspray on solar panels

I have a couple solar panels on a water tank.  A few months ago the 
water company painted the tank, and obviously didn't cover our panels 
the whole time, so there is a very thin layer of paint on them.

Not sure what kind of paint it is, but I can scratch it off with my 
fingernails.  I don't have enough fingernails to do all the panels 
though

Any suggestions on what to use to take that off without damaging the 
solar panels?  I'm sure they'll work better without brown specs all over 
them.


-- 
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/






WISPA Wants You! Join today!
http://signup.wispa.org/


 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/




WISPA Wants You! Join today!
http://signup.wispa.org/


 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/




WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-30 Thread Randy Cosby
Thanks, I think I'll give this a try first, maybe try a plastic pot 
scrubber with it.

Randy


Jerry Richardson wrote:
 It's likely water base in which warm soapy water and a squeeqee will suffice. 
 Don't use anything abrasive.

 If it's oil base, it may still come off with warm soapy water as it overspray 
 tends to be partially dry by the time it lands.

 Try not to scrape as it leaves small scratches that catch pollen and dust.



 -Original Message-
 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
 Behalf Of Randy Cosby
 Sent: Thursday, October 29, 2009 1:51 PM
 To: WISPA General List
 Subject: [WISPA] Suggestions - paint overspray on solar panels

 I have a couple solar panels on a water tank.  A few months ago the 
 water company painted the tank, and obviously didn't cover our panels 
 the whole time, so there is a very thin layer of paint on them.

 Not sure what kind of paint it is, but I can scratch it off with my 
 fingernails.  I don't have enough fingernails to do all the panels 
 though

 Any suggestions on what to use to take that off without damaging the 
 solar panels?  I'm sure they'll work better without brown specs all over 
 them.


   

-- 
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/





WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-30 Thread Jerry Richardson
I have a black glass stove - plastic pot scrubber scratched the hell out of it.

Soft bristle brush would be safer. You could get a car wash brush with a long 
handle - should make it easier to reach across the panels.

-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of Randy Cosby
Sent: Friday, October 30, 2009 7:59 AM
To: WISPA General List
Subject: Re: [WISPA] Suggestions - paint overspray on solar panels

Thanks, I think I'll give this a try first, maybe try a plastic pot 
scrubber with it.

Randy


Jerry Richardson wrote:
 It's likely water base in which warm soapy water and a squeeqee will suffice. 
 Don't use anything abrasive.

 If it's oil base, it may still come off with warm soapy water as it overspray 
 tends to be partially dry by the time it lands.

 Try not to scrape as it leaves small scratches that catch pollen and dust.



 -Original Message-
 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
 Behalf Of Randy Cosby
 Sent: Thursday, October 29, 2009 1:51 PM
 To: WISPA General List
 Subject: [WISPA] Suggestions - paint overspray on solar panels

 I have a couple solar panels on a water tank.  A few months ago the 
 water company painted the tank, and obviously didn't cover our panels 
 the whole time, so there is a very thin layer of paint on them.

 Not sure what kind of paint it is, but I can scratch it off with my 
 fingernails.  I don't have enough fingernails to do all the panels 
 though

 Any suggestions on what to use to take that off without damaging the 
 solar panels?  I'm sure they'll work better without brown specs all over 
 them.


   

-- 
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/





WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


[WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread Randy Cosby
I have a couple solar panels on a water tank.  A few months ago the 
water company painted the tank, and obviously didn't cover our panels 
the whole time, so there is a very thin layer of paint on them.

Not sure what kind of paint it is, but I can scratch it off with my 
fingernails.  I don't have enough fingernails to do all the panels 
though

Any suggestions on what to use to take that off without damaging the 
solar panels?  I'm sure they'll work better without brown specs all over 
them.


-- 
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/





WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread Dennis Burgess
Plastic ice scraper! :) 

---
Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
WISPA Board Member - wispa.org
Link Technologies, Inc -- Mikrotik  WISP Support Services
WISPA Vendor Member
Office: 314-735-0270 Website: http://www.linktechs.net
LIVE On-Line Mikrotik Training
Author of Learn RouterOS


-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Randy Cosby
Sent: Thursday, October 29, 2009 3:51 PM
To: WISPA General List
Subject: [WISPA] Suggestions - paint overspray on solar panels

I have a couple solar panels on a water tank.  A few months ago the
water company painted the tank, and obviously didn't cover our panels
the whole time, so there is a very thin layer of paint on them.

Not sure what kind of paint it is, but I can scratch it off with my
fingernails.  I don't have enough fingernails to do all the panels
though

Any suggestions on what to use to take that off without damaging the
solar panels?  I'm sure they'll work better without brown specs all over
them.


--
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/






WISPA Wants You! Join today!
http://signup.wispa.org/


 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread Mike
Are the tops smooth glass?  Just use a single edged razor held at a 
shallow angle and some elbow grease.

Mike

At 03:51 PM 10/29/2009, you wrote:
I have a couple solar panels on a water tank.  A few months ago the
water company painted the tank, and obviously didn't cover our panels
the whole time, so there is a very thin layer of paint on them.

Not sure what kind of paint it is, but I can scratch it off with my
fingernails.  I don't have enough fingernails to do all the panels
though

Any suggestions on what to use to take that off without damaging the
solar panels?  I'm sure they'll work better without brown specs all over
them.


--
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/





WISPA Wants You! Join today!
http://signup.wispa.org/


WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/





WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread jp
Ask your local autobody folks. Any sort of chemical paint remover is probably 
fine as 
long as you don't let it seep or run too much. The solar panels are simply 
covered with 
safety glass.

On Thu, Oct 29, 2009 at 02:51:07PM -0600, Randy Cosby wrote:
 I have a couple solar panels on a water tank.  A few months ago the 
 water company painted the tank, and obviously didn't cover our panels 
 the whole time, so there is a very thin layer of paint on them.
 
 Not sure what kind of paint it is, but I can scratch it off with my 
 fingernails.  I don't have enough fingernails to do all the panels 
 though
 
 Any suggestions on what to use to take that off without damaging the 
 solar panels?  I'm sure they'll work better without brown specs all over 
 them.
 
 
 -- 
 Randy Cosby
 Vice President
 InfoWest, Inc
 
 435-674-0165 x 2010
 
 http://www.infowest.com/
 
 
 
 
 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 
  
 WISPA Wireless List: wireless@wispa.org
 
 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless
 
 Archives: http://lists.wispa.org/pipermail/wireless/

-- 
/*
Jason Philbrook   |   Midcoast Internet Solutions - Wireless and DSL
KB1IOJ|   Broadband Internet Access, Dialup, and Hosting 
 http://f64.nu/   |   for Midcoast Mainehttp://www.midcoast.com/
*/



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread Greg
An automotive plastic snow/ice  scraper might be a good choice - less
chance of damaging the panels.

On 10/29/09, jp j...@saucer.midcoast.com wrote:
 Ask your local autobody folks. Any sort of chemical paint remover is
 probably fine as
 long as you don't let it seep or run too much. The solar panels are simply
 covered with
 safety glass.

 On Thu, Oct 29, 2009 at 02:51:07PM -0600, Randy Cosby wrote:
 I have a couple solar panels on a water tank.  A few months ago the
 water company painted the tank, and obviously didn't cover our panels
 the whole time, so there is a very thin layer of paint on them.

 Not sure what kind of paint it is, but I can scratch it off with my
 fingernails.  I don't have enough fingernails to do all the panels
 though

 Any suggestions on what to use to take that off without damaging the
 solar panels?  I'm sure they'll work better without brown specs all over
 them.


 --
 Randy Cosby
 Vice President
 InfoWest, Inc

 435-674-0165 x 2010

 http://www.infowest.com/




 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/

 --
 /*
 Jason Philbrook   |   Midcoast Internet Solutions - Wireless and DSL
 KB1IOJ|   Broadband Internet Access, Dialup, and Hosting
  http://f64.nu/   |   for Midcoast Mainehttp://www.midcoast.com/
 */


 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/




WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread Marlon K. Schafer
How about a razor knife?  We actually use one of them to clean our fancy 
glass top cook stove.  Doesn't seem to scratch it at all.
marlon

- Original Message - 
From: Randy Cosby dco...@infowest.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, October 29, 2009 1:51 PM
Subject: [WISPA] Suggestions - paint overspray on solar panels


I have a couple solar panels on a water tank.  A few months ago the
 water company painted the tank, and obviously didn't cover our panels
 the whole time, so there is a very thin layer of paint on them.

 Not sure what kind of paint it is, but I can scratch it off with my
 fingernails.  I don't have enough fingernails to do all the panels
 though

 Any suggestions on what to use to take that off without damaging the
 solar panels?  I'm sure they'll work better without brown specs all over
 them.


 -- 
 Randy Cosby
 Vice President
 InfoWest, Inc

 435-674-0165 x 2010

 http://www.infowest.com/




 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/ 




WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread Jerry Richardson
It's likely water base in which warm soapy water and a squeeqee will suffice. 
Don't use anything abrasive.

If it's oil base, it may still come off with warm soapy water as it overspray 
tends to be partially dry by the time it lands.

Try not to scrape as it leaves small scratches that catch pollen and dust.



-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of Randy Cosby
Sent: Thursday, October 29, 2009 1:51 PM
To: WISPA General List
Subject: [WISPA] Suggestions - paint overspray on solar panels

I have a couple solar panels on a water tank.  A few months ago the 
water company painted the tank, and obviously didn't cover our panels 
the whole time, so there is a very thin layer of paint on them.

Not sure what kind of paint it is, but I can scratch it off with my 
fingernails.  I don't have enough fingernails to do all the panels 
though

Any suggestions on what to use to take that off without damaging the 
solar panels?  I'm sure they'll work better without brown specs all over 
them.


-- 
Randy Cosby
Vice President
InfoWest, Inc

435-674-0165 x 2010

http://www.infowest.com/





WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


Re: [WISPA] Suggestions - paint overspray on solar panels

2009-10-29 Thread RickG
And on that note, why not contact the solar panel manufacturer? -RickG

On Thu, Oct 29, 2009 at 5:03 PM, jp j...@saucer.midcoast.com wrote:
 Ask your local autobody folks. Any sort of chemical paint remover is probably 
 fine as
 long as you don't let it seep or run too much. The solar panels are simply 
 covered with
 safety glass.

 On Thu, Oct 29, 2009 at 02:51:07PM -0600, Randy Cosby wrote:
 I have a couple solar panels on a water tank.  A few months ago the
 water company painted the tank, and obviously didn't cover our panels
 the whole time, so there is a very thin layer of paint on them.

 Not sure what kind of paint it is, but I can scratch it off with my
 fingernails.  I don't have enough fingernails to do all the panels
 though

 Any suggestions on what to use to take that off without damaging the
 solar panels?  I'm sure they'll work better without brown specs all over
 them.


 --
 Randy Cosby
 Vice President
 InfoWest, Inc

 435-674-0165 x 2010

 http://www.infowest.com/




 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/

 --
 /*
 Jason Philbrook   |   Midcoast Internet Solutions - Wireless and DSL
    KB1IOJ        |   Broadband Internet Access, Dialup, and Hosting
  http://f64.nu/   |   for Midcoast Maine    http://www.midcoast.com/
 */


 
 WISPA Wants You! Join today!
 http://signup.wispa.org/
 

 WISPA Wireless List: wireless@wispa.org

 Subscribe/Unsubscribe:
 http://lists.wispa.org/mailman/listinfo/wireless

 Archives: http://lists.wispa.org/pipermail/wireless/




WISPA Wants You! Join today!
http://signup.wispa.org/

 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/