:38 -0700
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I've used these guys for grounding the shield of a cat5 cable:
http://www.oregonfast.net/gofast/Spruce/4460-D%20Shield%20connector-1.pdf
Eric Rogers wrote:
I was just referring to the shielding
, 2006 12:00 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Do you find that a surge supressor at the CPE is better then at the
internal PC/Router/Switch? Or do
you use one at each end?
Jeromie
Harold Bledsoe wrote:
I can answer some
, August 27, 2006 12:00 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Do you find that a surge supressor at the CPE is better then at the
internal PC/Router/Switch? Or do
you use one at each end?
Jeromie
Harold Bledsoe wrote:
I can answer some
]
To: WISPA General List wireless@wispa.org
Sent: Sun, 27 Aug 2006 14:36:16 -0400
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I myself use them at our tower sites at the bottom AND the top. I
had a
tower get struck, directly and lost everything...including the switch
:56 PM
To: 'WISPA General List'
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
What brand and part number cable and connectors do you use for the CAT5E
cable?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Eric Rogers
Sent: Sunday, August
Of Scott Reed
Sent: Sunday, August 27, 2006 5:07
PM
To: WISPA General List
Subject: RE: [WISPA] Self Adhesive
Mini PCB supports for Mikrotik
I believe that solder is probably not a good idea here. Lightning
can build enough heat to melt the solder and thus break the connection. I
think all
27, 2006 5:07 PM
*To:* WISPA General List
*Subject:* RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I believe that solder is probably not a good idea here. Lightning can
build enough heat to melt the solder and thus break the connection. I
think all ground connections need
Nice work Brian.
You can always tell when someone cares about their work.
George
Brian Rohrbacher wrote:
I take a self tapper and run it out the bottom of my metal box, attach a
#12 piggy tail, and attach the other end through a hole on the board.
Kind of like the attached pic. Should
Message
---
From: Harold Bledsoe [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Sat, 26 Aug 2006 15:38:03 -0400
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Perfect! :-)
-Hal
-Original Message-
From: [EMAIL
...
-Hal
--
Harold Bledsoe
Deliberant Wireless
http://www.deliberant.com
From: [EMAIL PROTECTED] on behalf of Mark Nash
Sent: Fri 8/25/2006 1:04 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports
10 matches
Mail list logo