RE: [WISPA] Tower Height Regulations

2006-01-12 Thread Rick Harnish
Rick, There is a link in the drop down list called WISP Resouces for that page. It is the very top page called FCC Tower Search. Respectfully, Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED]

RE: [WISPA] Tower Height Regulations

2006-01-12 Thread Rick Harnish
Doih!, The link is on the www.wispa.org webpage. Rick Harnish President OnlyInternet Broadband Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of

Re: [WISPA] Tower Height Regulations

2006-01-12 Thread Marlon K. Schafer
The best way is to contact the FAA directly. A couple of quick phone calls should do the trick. marlon - Original Message - From: Rick Smith [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Wednesday, January 11, 2006 9:18 PM Subject: RE: [WISPA] Tower Height

[WISPA] Redundant Connections

2006-01-12 Thread John Scrivner
A little feedback from the collective is appreciated here. I have a high school who has bought a connection from me but is also stuck with an old T1 circuit under contract for the next 3 years. They want both connections to be used all the time and for all traffic to automatically go through

RE: [WISPA] Redundant Connections

2006-01-12 Thread Paul Hendry
Running a EoIP tunnel across both the T1 and your link you should be able to load-balance across both links for incoming and outgoing traffic by bonding both EoIP interfaces at the customer site and your Mikrotik box. I have done this in the past but it has been across a couple of wireless links

RE: [WISPA] Redundant Connections

2006-01-12 Thread danlist
Can mikrotik switch between per packet or per session load balancing? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: Thursday, January 12, 2006 3:23 PM To: 'WISPA General List' Subject: RE: [WISPA] Redundant Connections Running

[WISPA] BlueSocket APs?

2006-01-12 Thread chris cooper
Does anyone have any production experience with BlueSocket Ap-1500s under heavy user loads? Thanx Chris -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] Redundant Connections

2006-01-12 Thread danlist
I think it depends on the links involved and the remote termination, I currently run per packet round robin load balance across 3 T1's, no issue's with VoIP or VPN - of course the remote ends points are the same devices -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

[WISPA] Canopy Lite $200 per SM MSRP

2006-01-12 Thread A. Huppenthal
Moto announced their Lite SM - $200 list. Slow - 500Kbit. Designed to compete with dialup. Speed upgrades available this year, according to their announcement - up to 7 mbit. -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Attempted hack, what would you do?

2006-01-12 Thread Victoria
Theoretically, if someone attempted to hack into your network via your router, say at least ten times, what would you do? If you could identify this culprit via logs and IP addresses, where you had them dead to rights, what would you do? ~V~ -- WISPA Wireless List: wireless@wispa.org

RE: [WISPA] Attempted hack, what would you do?

2006-01-12 Thread Chadd Thompson
Happens every day on our network. I get about 500 to 1000 hits a day on our servers/router logs of ppl port scanning and or running log in scripts trying to crack a username/pass. I have only turned a few in to thier ISP's abuse address and never heard anything from it except for a canned message

RE: [WISPA] VOIP / CommPartners

2006-01-12 Thread Charles Wu
Not to kick a dead horse here, but I heard the other day (from a WISP friend of mine) that Commpartners has stop installing WISP residential connections (due to E911 compliance issues) for the time being This sucks for him since he's already paid the $5k setup fee and his 1500+ wireless customers