RE: [WISPA] frame size and fps - Mikrotik large packets

2006-08-02 Thread Jeff Broadwick
Back atcha Tom: The only comment I disagree with is The proper VLAN aware drivers show 1500 MTU for both the underlying interface and the VLAN interface but it treats VLAN packets with caution, so as not to truncate or drop them because of their longer size. If that's true, then it

[WISPA] Cat5 cable

2006-08-02 Thread chris cooper
Im installing some 120 runs of cat 5 in building shafts. I also need to take this through a roof penetration and 20 across the roof to hook up to my radios. I can find exterior cable and riser rated cable, but not one that will serve both needs. Anybody have any idea where I can find such

Re: [WISPA] Cat5 cable

2006-08-02 Thread Bob Moldashel
chris cooper wrote: Im installing some 120’ runs of cat 5 in building shafts. I also need to take this through a roof penetration and 20’ across the roof to hook up to my radios. I can find exterior cable and riser rated cable, but not one that will serve both needs. Anybody have any idea

Re: [WISPA] Cat5 cable

2006-08-02 Thread Mark Nash
No but you could put the 20' in conduit. Mark NashNetwork EngineerUnwiredOnline.Net350 Holly StreetJunction City, OR 97448http://www.uwol.net541-998-541-998-5599 fax - Original Message - From: chris cooper To: 'WISPA General List' Sent: Wednesday, August 02,

Re: [WISPA] Cat5 cable

2006-08-02 Thread Paul Pescitelli
You will probably want to use plenum for the entire run. see http://www.phonicear.com/learnplenum.asp regards, Paul www.opnehsmm.org On 8/2/06, chris cooper [EMAIL PROTECTED] wrote: Im installing some 120' runs of cat 5 in building shafts. I also need to take this through a roof

[WISPA] SpanAssassin

2006-08-02 Thread Scott Reed
I am looking for a easy, step-by-step guide to setup SpamAssassin on my Linux sendmail server.  Google has not provided anything that gets me there.  Anyone have a link to a good setup guide? Scott Reed Owner NewWays Wireless Networking Network Design, Installation and

Re: [WISPA] frame size and fps - Mikrotik large packets

2006-08-02 Thread Tom DeReggi
I'm not sure what you are asking about, MPLS, or Before MPLS. (Before MPLS switches allowing larger packets were mainstream and affordable) Many current Layer 2 Switches support MPLS. Example is newer CISCO switches, since Cisico developed MPLS. Any MPLS enabled switch supports the larger

RE: [WISPA] SpanAssassin

2006-08-02 Thread Eric Rogers
http://www.peregrinehw.com/downloads/ Eric From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Reed Sent: Wednesday, August 02, 2006 10:29 AM To: wireless@wispa.org Subject: [WISPA] SpanAssassin I am looking for a easy, step-by-step guide to setup

Re: [WISPA] SpanAssassin

2006-08-02 Thread Jeremy Davis
Scott Reed wrote: I am looking for a easy, step-by-step guide to setup SpamAssassin on my Linux sendmail server. Google has not provided anything that gets me there. Anyone have a link to a good setup guide? I've always prefered to use amavisd to integrate spamassassin.

RE: [WISPA] SpanAssassin

2006-08-02 Thread Grant Stufft
http://www.ijs.si/software/amavisd/ Add Clam-AV if you do not already have AV on the mail Server. Grant From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Reed Sent: Wednesday, August 02, 2006 10:29 AM To: wireless@wispa.org Subject: [WISPA] SpanAssassin

Re: [WISPA] frame size and fps - Mikrotik large packets

2006-08-02 Thread Tom DeReggi
Jeff, know that, under Linux, they do that, but it doesn't make it correct. :-) It just makes it confusing. It's one of the reasons that I think so many people confuse MTU and MSS. I agree. Just for the record, ImageStream supports but does not recommend using CIPE as our first choice.

Re: SPAM-LOW: Re: [WISPA] Chicago tower

2006-08-02 Thread Marlon K. Schafer (509) 982-2181
Cool. I thought that might have been your tennis shoe in the pic! hehehehe Marlon (509) 982-2181 Equipment sales (408) 907-6910 (Vonage)Consulting services 42846865 (icq)And I run my own wisp!

[WISPA] SR9's

2006-08-02 Thread George Rogato
Has anyone heard if they started shipping again? I'm in the market. Thanks George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

Re: [WISPA] SR9's

2006-08-02 Thread Blair Davis
So am I DIBS! George Rogato wrote: Has anyone heard if they started shipping again? I'm in the market. Thanks George -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List:

RE: [WISPA] SpanAssassin

2006-08-02 Thread Mac Dearman
I hate to toot anyones horn, but I do happen to know if you need any help getting all this set up and functioning like it needs to - - Jeremy can handle it if he has time. Mac Dearman From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Grant Stufft Sent:

Re: [WISPA] SR9's

2006-08-02 Thread rabbtux rabbtux
Just got my 3 radios, but I ordered and payed for them the last week of June. (can't wait to test 'em out later this week :) On 8/2/06, George Rogato [EMAIL PROTECTED] wrote: Has anyone heard if they started shipping again? I'm in the market. Thanks George -- WISPA Wireless List:

[WISPA] Wrap 2 power

2006-08-02 Thread chris cooper
We are rolling out some wrap 2 based nodes. The node, including power will be mounted externally. Has anyone devised a way to weather harden the AC plug/POE block combo? Ive got an idea for a 2nd , small enclosure that piggy backs on the radio enclosure, but Im wondering if someone has

Re: [WISPA] SR9's

2006-08-02 Thread Blair Davis
I ordered mine june 16th or so. still not here This is getting annoying. rabbtux rabbtux wrote: Just got my 3 radios, but I ordered and payed for them the last week of June. (can't wait to test 'em out later this week :) On 8/2/06, George Rogato [EMAIL PROTECTED] wrote: Has

[WISPA] RouterBoard 532A

2006-08-02 Thread Blair Davis
Hi all, Just got my RouterBoard 532A units. Thought they had built-in flash memory pre-loaded with MikroTik 2.9.+ software. But when I got them, I noticed a CF card socket.. Anyone know if I orderd the wrong thing by mistake? I wanted the RouterBoard with pre-loaded software.

Re: [WISPA] Wrap 2 power

2006-08-02 Thread Blair Davis
WRAP 2? what specs? will it take 48V POE? chris cooper wrote: We are rolling out some wrap 2 based nodes. The node, including power will be mounted externally. Has anyone devised a way to weather harden the AC plug/POE block combo? Ive got an idea for a 2nd , small enclosure

RE: [WISPA] RouterBoard 532A

2006-08-02 Thread Paul Hendry
Mikrotik is builtin. CF is for optional stuff like web caching. Boot it up and plug a console cable in to access. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: 02 August 2006 23:31 To: WISPA General List Subject: [WISPA] RouterBoard

Re: [WISPA] Wrap 2 power

2006-08-02 Thread Bob Knight
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 If I'm not mistaken, WRAPs are only rated to 18VDC. Bob Blair Davis wrote: WRAP 2? what specs? will it take 48V POE? chris cooper wrote: We are rolling out some wrap 2 based nodes. The node, including power will be mounted externally.

Re: [WISPA] Wrap 2 power

2006-08-02 Thread Blair Davis
I know the old WRAP were 18VDC. And I heard that they stopped making them. But, I had never heard of a new WRAP 2 I've moved on to Soekris. And, except for our Tranzeo units, all our POE is now 48VDC If the new WRAP is 48VDC, I'd be real interested in it. -- Blair Davis West MIchigan

RE: [WISPA] RouterBoard 532A

2006-08-02 Thread Mac Dearman
Be sure to check your jumpers for the POE and voltage. Depending on where you bought them as to their settings. If you don't check the POE/voltage settings and you fry one then you are on your own. If you bought them from Eje it is probably already set up with POE and 48VDC as well as they will

RE: SPAM-LOW: [WISPA] RouterBoard 532A

2006-08-02 Thread Mike Delp
Blair, Fire it up, It has internal memory with the MT OS on it. Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Wednesday, August 02, 2006 5:31 PM To: WISPA General List Subject: SPAM-LOW: [WISPA] RouterBoard 532A Hi all, Just