[WISPA] Wimax Forum Boast they can cover the earth for $2.6 trillion!

2006-09-15 Thread Dawn DiPietro
Wimax Forum Boast they can cover the earth for $2.6 trillion! Author: Digital Divide, Independent | September 13th, 2006 Communities: ICT FOR THE LESS PRIVILEGED the WSIS to encourage partnerships to bridge the digital divide. The objective is to bring access ICTs to the people worldwide whom

RE: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Paul Hendry
Brian, Just out of interest, did you try running both power and data over the new cable and did you still see the same issue? P. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: 15 September 2006 02:43 To: WISPA General List

[WISPA] FCC's wireless auction winds down

2006-09-15 Thread Dawn DiPietro
FCC's wireless auction winds down Spectrum-hungry T-Mobile USA leads the pack of bidders for airwaves to carry advanced wireless services such as broadband and video. By Reuters Published: September 14, 2006, 4:26 PM PDT Tell us what you think about this storyTalkBack E-mail this story to a

RE: [WISPA] MiniPCI wireless card recommendation...

2006-09-15 Thread chris cooper
Can anyone else confirm/deny this? Thanks Chris I thought the issue was that the cards are mis marked. Marked back wards. The outside corner is actually antenna port A . Card says B George Anthony Will wrote: It looks like he is talking about the antenna ports on the mPCI card. There are

Re: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Brian Rohrbacher
I was on 48v from the start. But I tested 4 48v power supplies300, 420, 700, and 1000mA units. None of that had any effect. The seperate cables. One for power, one for data fixed it. Brian George Rogato wrote: Good call Brian, Being an electrician all of my previous working life,

Re: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Brian Rohrbacher
I started with RB 532 on tower. It comes down 265 feet to poe injector to router. Major packet loss. 2) switched RB 532 out. No change. 3) Created test setup on ground with bad board and it looked fine. (from laptop--6ft cablepoe265 ft---RB) 4) Blamed it on the cable,

Re: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Rick Smith
Brian, did you try the long cable setting on that particular interface ? Brian Rohrbacher wrote: I started with RB 532 on tower. It comes down 265 feet to poe injector to router. Major packet loss. 2) switched RB 532 out. No change. 3) Created test setup on ground with bad board

Re: [WISPA] MiniPCI wireless card recommendation...

2006-09-15 Thread Lonnie Nunweiler
We set our software to use antenna A which is the corner antenna connector on the CM9 and the WLM54G. The WLM54G calls that antenna the secondary, so we are accepting it as a mis-marked part, or marked for another application. We see no difference between A and B in terms of performance.

Re: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Scott Reed
I just looked at that Resources for a 532.  2 Ports are VIA Technologies.  The 3rd is Integrated Device Technologies. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From:

Re: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Tom DeReggi
Additionally consider, just because something works on the ground doesn;t mean that it will work up in the air, for two reasons. 1) When operating outside of specs, it may take a period of time before the equipment starts to fail and flaws show up. (heat build up, or stress on devices)

[WISPA] OT: Friday Fun...

2006-09-15 Thread Matt Larsen - Lists
I've been having fun with YouTube this week. I put up a bunch of videos of my band Superuser on YouTube. Just search with keyword Superuser or go here: http://www.youtube.com/results?search_query=superusersearch=Search Brings back lots of memories of what I did before wireless. I'm the fat

RE: [WISPA] OT: Friday Fun...

2006-09-15 Thread Gino A. Villarini
Matt, I supposed you will be headlining on ISPcon ? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Larsen - Lists Sent: Friday, September

Re: [WISPA] OT: Friday Fun...

2006-09-15 Thread Tom DeReggi
Cool. I I II I I I I Il I I l \ l l \ / l l l l Rock and Roll !!! Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Matt

[WISPA] 900 mhz power meter

2006-09-15 Thread chris cooper
Is there a 900 mhz test meter that will measure power readings at cable end? Im thinking of a device that could be inserted inline between cable and antenna. Ideas? Thanks Chris -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:

Re: [WISPA] OT: Friday Fun...

2006-09-15 Thread Mark Nash
I think there are alot of bass players on this... Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: Matt Larsen - Lists [EMAIL PROTECTED] To: [EMAIL PROTECTED]; WISPA General

Re: [WISPA] MT power supplies THE SOLUTION

2006-09-15 Thread Brian Rohrbacher
Good points. Likely I will not touch it again unless it breaks. I'll try to get a make on the good cable, but I know the cheap stuff I ran yesterday is the arc wireless shielded, flooded, drainwire, I picked up 6 months ago when it was $69 a roll. Brian Tom DeReggi wrote: So the question

RE: [WISPA] MiniPCI wireless card recommendation...

2006-09-15 Thread Mark McElvy
Lonnie is correct, the corner port is marked AUX and assumed it was antenna B. I was connected to the port marked Main and was trying to use antenna A. All just backward. My original testing was at close ranges and the difference was not noticeable. Mark -Original Message- From: [EMAIL