From one of the engineers at PGE. These are 1W and are definately going
to be a problem.
700MHz is looking better and better
__
Jerry Richardson
airCloud Communications
Jerry,
Typically, for gas meter is the licensed 450MHz
Anybody have network in 6380 Wilshire in LA?
http://www.rapidlink.com/
Michael Prachar - COO
Voice: (1) 402-392-7502 PST (GMT -8 Hrs.)
Fax: (1) 402-392-7585 (Anytime)
mi...@rapidlink.com
mailto:mi...@rapidlink.com?subject=i%20clicked%20your%20email%20signatu
re!
image001.gif
I have a 2 mile 18 ghz link using Trango Giga, Im starting to drop
packets, auto rate has dropped speed to qpsk, still MSE and BER is being
affected sometimes on one end or both ...ATPC is on, rssi is -35 on both
ends
anyway to tell where the problem is?
Gino A. Villarini
g...@aeronetpr.com
Going to need lots more info to be able to help.
Cable run length and type of cable used.
What is your expected RSSI per your path analysis
What is your targetrssi set to
What are your cableloss settings
What is your power set to
Run a link 10 command from both sides and provide results
What
I'll do that, Link was working for months
Gino A. Villarini
g...@aeronetpr.com
Aeronet Wireless Broadband Corp.
tel 787.273.4143 fax 787.273.4145
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Brad Belton
Sent: Friday, April
First off, I believe your signal is too hot. turn the tx power down til you
reach between a -50 and -60 dB. That is usually the sweet spot on most RF
equipment. Right now you are screaming at each other.
- Original Message
From: Gino Villarini g...@aeronetpr.com
To: WISPA General
I know the feeling. We had one of our early Giga links working for months
not realizing we had made mistakes until later.
Got your configs...but also send me the link 10 results along with the type
and length of cable on each end.
Brad
-Original Message-
From:
We are using lmr400 on both ends, about 100' per end
Linktest 10 results
End 1
(trango-view)# linktest 10
LOCK RSSI MSEBER
1 1 -31.00 dBm -26.78 dB 7.42E-07
2 1 -31.00 dBm -26.58 dB 0.00E+00
3 1 -31.00 dBm
Not necessarily true with high frequency or millimeter microwave gear. Due
to large fade issues inherent with higher frequencies it is not uncommon to
engineer a link with -35 RSSI levels.
I believe the Giga is safe down to -25 RSSI or thereabouts. However the
higher the modulation rate the
Gino,
Looks to me like you are running a little hot. You want the MSE to be
-32 or better I would try turning the power down on each side 1db at
a time until you get the best MSE (on the remote side) while still
having the best signal.
We had to turn one of our links down to +12 to get
Hello,
This is neat to see. I know a lot of the Western Union towers where
taken down. At least in the Midwest, we had a WISP in our area that was
taking them down for years as a side job.
I wish it was easy to rent from American. We tried to get on 10 of
the old ATT towers in
There's a bunch of that stuff up here in Eastern Oregon and Southeast
Washington, too.
I have no idea what's still active and what's not.
insert witty tagline here
- Original Message -
From: Brian Webster bwebs...@wirelessmapping.com
To: Motorola
Whats the relation of target rssi and real rssi?
If I change target rssi on end 1, rssi changes on the linktest on end 1
without touching power on end 2 ...wtf?
Atpc is off on both ends
Gino A. Villarini
g...@aeronetpr.com
Aeronet Wireless Broadband Corp.
tel 787.273.4143 fax
Replied off list...
Best,
Brad
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Gino Villarini
Sent: Friday, April 03, 2009 3:30 PM
To: WISPA General List
Subject: Re: [WISPA] Trango Giga Problem
Whats the relation of target rssi
Ahhh, I see you're replying on and off list. No problem for me to reply on
list...I was only concerned with sharing your information on a group list.
Best,
Brad
-Original Message-
From: Brad Belton [mailto:b...@belwave.com]
Sent: Friday, April 03, 2009 3:33 PM
To: 'WISPA General
Don't believe it. ATC charges simply because they can. And to
be blunt, they really don't care much about a prospective customer
unless it is a cellular customer.
I know, and others know, where the majority of the prints on the
ATT towers are kept, and so does both ATT and ATC. They
simply
http://www.eweek.com/c/a/Security/Bill-Grants-President-Unprecedented-Cyber-Security-Powers-504520/
Sometimes I wish people would REALLY pay attention. All this whining and
moaning about how Bush violated our rights...
Anyway... this is reason for concern for all of us.
Another interesting article in the same theme...
http://www.eweek.com/c/a/Security/The-Proposed-Federalization-of-the-Computer-Security-Field-297694/
SSDD...
insert witty tagline here
- Original Message -
From: rea...@muddyfrogwater.us
To: WISPA
Also, don't assume its not interference. Licensed gets interference to. If
your MSE is showing Interference its very possible that is exactly what you
are having.
You may need to briefly/temporarilly change channels to verifiy.
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless
Big Brother already started comming with those darn Traffic Cameras. I got
6 tickets (40mph in newly posted 25-30 mph zones) within 2 weeks.
They plan to eventually have them at EVERY Intersection here.
I'm suspecting more privacy will be lost as more networks become
operated/controlled by
20 matches
Mail list logo
