Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-31 Thread Mark McElvy
Ok, dumb question time. How does electrical downtilt work on an omni? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, March 30, 2010 9:50 PM To: sarn...@info-ed.com; WISPA General List Subject: Re: [WISPA]

Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-31 Thread Greg Ihnen
It projects a cone instead of a disc. Greg On Mar 31, 2010, at 7:56 AM, Mark McElvy wrote: Ok, dumb question time. How does electrical downtilt work on an omni? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent:

Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-31 Thread Mark McElvy
So its just something that is there with no adjustment? -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, March 31, 2010 7:45 AM To: WISPA General List Subject: Re: [WISPA] Ubiquiti Sector Tilt angle It

Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-31 Thread Chuck Bartosch
Not so dumb. But a simple Google search for electrical downtilt results in: http://www.eng-tips.com/viewthread.cfm?qid=145707page=11 The first result. Gives a simple, clear answer as far as I read it. Chuck On Mar 31, 2010, at 8:26 AM, Mark McElvy wrote: Ok, dumb question time. How does

Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-31 Thread Greg Ihnen
Correct, it is achieved by altering the phasing between the sections compared to a non-downtilt antenna. The sections that determine the phasing are a different length. It's a physical thing, not electronic. Greg On Mar 31, 2010, at 8:17 AM, Mark McElvy wrote: So its just something that is

Re: [WISPA] Bandwidth Tracking Solutions

2010-03-31 Thread Marlon K. Schafer
Bandwidth or bits? Actually ip track kind of does both. Each customer can see the speeds that their system was averaging. We never use it because we worry about peak speeds, but the data is there. All data is sent by the main routers. marlon - Original Message - From: Matt Larsen -

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Marlon K. Schafer
lol Yeah, it sucks. Really the vendors that sell those configs are the ones that we should all avoid like the plague. Then BOTH companies would go away sooner than later. Anyone remember Hyperlink? They loved to sell those 1 watt amps with 15dB omni antennas. Those guys put more operators

[WISPA] 2.4/5.x GHz load balancing

2010-03-31 Thread Rogelio
As more and more devices support 5.x GHz access, is there solutions to auto optimize clients on the best 2.4 GHz or 5.x GHz channel? That is to say, 2.4 GHz goes farther, but 5.x GHz has more capacity and is less cluttered. Say a new iPad sees both signals, is there an access point that could

Re: [WISPA] 2.4/5.x GHz load balancing

2010-03-31 Thread Justin Wilson
You can use connect lists in Mikrotik to force clients to connect at minimum levels. This way you don¹t have to worry so much about the band, but meeting those minimum levels. I am assuming you are working this into a hotspot type of setup. Justin -- Justin Wilson j...@mtin.net

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Cameron Crum
Can't say how many times I posted on different lists warning about 15 dBi omnis. It is next to impossible to make a 15 dBi omni with any usable elevation beamwidth at all - electrical downtilt or not. 12 dBi is pretty much the maximum and at that you will be lucky to see anything over a degree

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Marco Coelho
If they are operating illegally, a quick way to get them shut down is to contact the owner of the tower they are on next to yours. I recommend a verbal phone call informing them of the situation including all documentation via e-mail. I would follow it with a certified letter. Most tower

Re: [WISPA] Ubiquiti Sector Tilt angle

2010-03-31 Thread Robert West
Electrically. :) Had to. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, March 31, 2010 8:26 AM To: WISPA General List Subject: Re: [WISPA] Ubiquiti Sector Tilt angle Ok, dumb question time. How does

[WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Drew Lentz
Didn't see this one coming but it looks like it could lead to some nice products for WISPs. http://bit.ly/bX4HTc Canadian Company Tranzeo Wireless to Acquire Aperto Networks Tranzeo strengthens its international market with complete broadband solution PITT MEADOWS, BRITISH COLUMBIA, Mar 31,

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Tom Sharples
Looks like their products are still available. Here's my favorite: http://www.l-com.com/item.aspx?id=22131 Can you imagine running that kind of power - indoors?? Tom S. - Original Message - From: Marlon K. Schafer o...@odessaoffice.com To: WISPA General List wireless@wispa.org Sent:

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Josh Luthman
Extra limb alert. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 11:45 AM, Tom Sharples tsharp...@qorvus.com

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Patrick Leary
Yes, the cat is out of the bag. We are very excited about this... Patrick Leary Aperto Networks 813.426.4230 mobile -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Drew Lentz Sent: Wednesday, March 31, 2010 8:42 AM To: WISPA General

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Gino Villarini
Wow Was Aperto in financial trouble? This is like YDI buying Proxim Or Ubiquity buying Motorola Sent from my Motorola Startac... On Mar 31, 2010, at 11:45 AM, Drew Lentz d...@drewlentz.com wrote: Didn't see this one coming but it looks like it could lead to some nice products for

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Patrick Leary
The past few years have been challenging for all Gino, especially for companies that leverage private investment. As you may know, we have had a working relationship with Tranzeo for some time; they manufacture our 3.65 GHz CPE using our code. Over time this relationship has deepened. I have

Re: [WISPA] Bandwidth Tracking Solutions

2010-03-31 Thread David
We use mrtg/rrd to collect data transfer values from cpe. Then we use mrtg totalizer to produce graphs that have daily and month totals. We also have a modified totalizer script that checks to see if that are any bandwidth abusers because they have used more than x in the last 30 days and y in

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Gino Villarini
Don't want to get into details but the Tranzeo reputation among Wisp is varied Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Patrick Leary Sent:

[WISPA] Does anybody have any ideas?

2010-03-31 Thread Forbes Mercy
We have been plagued with an ongoing issue in our Mikrotik backhauls. It happens about once a month and only on three radios that feed each other, all other sites work fine. Site A is my head end, it is a Mikrotik 433 with an XR5 chip that feeds about five miles to another site to Site B.

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Josh Luthman
Maybe others have the power to keep this in mind but a network diagram would certainly help. From what I'm gathering the issue isn't a MT backhaul but rather things at a site going up/down in weird patterns. My first guess would be bad switch. Josh Luthman Office: 937-552-2340 Direct:

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Robert West
Do you have other 5GHz in that area? Any possibility of the DFS being triggered? Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Wednesday, March 31, 2010 1:06 PM To: WISPA General List Subject: [WISPA] Does

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Marlon K. Schafer
In that case it WAS the vendor's fault because THEY often picked out the config for new people. If I recall correctly they were smacked around a bit by the FCC for selling known bad systems. Either way, that problem seems to have fixed it's self. marlon - Original Message - From:

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread eje
Bridged or routed ? /Eje Sent via BlackBerry from T-Mobile -Original Message- From: Forbes Mercy forbes.me...@wabroadband.com Date: Wed, 31 Mar 2010 10:06:29 To: WISPA General Listwireless@wispa.org Subject: [WISPA] Does anybody have any ideas? We have been plagued with an ongoing

[WISPA] Bit Cap Thresholds, etc

2010-03-31 Thread Jason Wallace
I have a few questions for those of you who sell bandwidth by the byte: 1. What is the threshold you use, ie, 3Gb in 30 days, or do you have different packages? 2. Is this total bytes in out or just in? 3. What do you charge for overages? 4. Have you considered just throttling back customers

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Robert West
He says he's all bridged right now. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of e...@wisp-router.com Sent: Wednesday, March 31, 2010 1:22 PM To: WISPA General List Subject: Re: [WISPA] Does anybody have any ideas? Bridged or

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Robert West
What RouterOS version are you running? Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Wednesday, March 31, 2010 1:06 PM To: WISPA General List Subject: [WISPA] Does anybody have any ideas? We have been

[WISPA] What Dual Lan Router

2010-03-31 Thread ~NGL~
What Dual Wan Routers do you recommend. I now use the Hotbrick LB2, but I is now requiring rebooting too often. Thanx NGL WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] What Dual Lan Router

2010-03-31 Thread Josh Luthman
I personally would use Mikrotik. An IT company around here uses (from memory) RouteFinder form MultiTech. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” ---

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Forbes Mercy
Thanks for the interest in helping here is the info: Site A RB532A board AR5212 chip v3.30 OS Running as an AP Bridge Running WDS and Nstreme Site B to Site A RB133 board A5413 chip v3.30 OS Running as Station WDS Running WDS and Nstreme Site B to Site C RB532A board AR5413 chip v3.30 OS

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Stuart Pierce
Well he isn't the only WISP friend that uses Tranzeo, come on now. Just waiting for the Motorola people to start slamming Aperto now. -- Original Message -- From: Patrick Leary ple...@apertonet.com Reply-To: WISPA General List wireless@wispa.org Date:

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Justin Wilson
All sites have good, clean power? Do the logs say anything before you reboot? Dirty power causes a ton of weird issues. If you have something that regulates the power you can rule that out. It could be maybe a motor or something kicks on and causes enough voltage drop to lockup the

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Eric Rogers
Is there a reason you are using Pseudobridge? You will not be able to pass any MAC addresses behind the Station (CPE/Slave), it MAC NATs. Change to WDS instead and see if your problems go away. It is better to have a layer 2 bridge and deal with the broadcasts at each site. Eric Rogers

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Forbes Mercy
This is exactly what I did and it worked, we are not coordinating frequencies, they are a professional tower firm and immediately called their clients and both called me. It also told me I had two new competitors in town :(, at least their professional unlike the local boys, problem appears

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Patrick Leary
Cheers Stu. Patrick Leary Aperto Networks 813.426.4230 mobile -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Stuart Pierce Sent: Wednesday, March 31, 2010 11:50 AM To: WISPA General List Subject: Re: [WISPA] Tranzeo to acquire

Re: [WISPA] What Dual Lan Router

2010-03-31 Thread RickG
I liked the Hotbrick and how it works but it became flaky after awhile. Switched to a Linksys and got more reliablity. I'm thinking MT woudl be best but never tried it. -RickG On Wed, Mar 31, 2010 at 1:33 PM, ~NGL~ n...@ngl.net wrote: What Dual Wan Routers do you recommend. I now use the

Re: [WISPA] What Dual Lan Router

2010-03-31 Thread Nick Olsen
Depends on what you want to do with it. In terms of what to use both connections for. Failover, Load Balancing...etc... I've had good luck with the mikrotik PCC stuff when it comes to 2 upstreams that are being nat'ed. Its in the wiki somewhere. Nick Olsen Network Engineer / Customer Support

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread RickG
I inherited a system with several Hyperlink 15dBi antennas on the repeater sites. My first thought was yuk. After living with them for over 3 years I've been very impressed on how well they work. I tried replacing one with a Pacific Wireless OD24-12 unit with electronic downtilt, lost association

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Scottie Arnett
Yea, I learned my lesson. I now use 7.5dB Omni's with downtilt. Scottie -- Original Message -- From: Cameron Crum cc...@dot11net.com Reply-To: WISPA General List wireless@wispa.org Date: Wed, 31 Mar 2010 08:58:08 -0600 Can't say how many times I posted

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread RickG
I tried to order one of these to make up for coaxial loss on one of my towers. They wouldnt sell it to me! -RickG On Wed, Mar 31, 2010 at 11:45 AM, Tom Sharples tsharp...@qorvus.com wrote: Looks like their products are still available. Here's my favorite:

Re: [WISPA] What Dual Lan Router

2010-03-31 Thread Jason Hensley
No experience with them, but have heard great things about the Draytek stuff - http://www.draytek.us/ -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ~NGL~ Sent: Wednesday, March 31, 2010 12:34 PM To: WISPA General List Subject: [WISPA]

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread RickG
Wow! It's like a dream - Tranzeo and Pat too! -RickG On Wed, Mar 31, 2010 at 12:01 PM, Patrick Leary ple...@apertonet.com wrote: Yes, the cat is out of the bag. We are very excited about this... Patrick Leary Aperto Networks 813.426.4230 mobile -Original Message- From:

Re: [WISPA] What Dual Lan Router

2010-03-31 Thread Josh Luthman
I think I tried what you're talking about. It did not work well for me. This is how I do it... http://stfunoo.be/?p=268 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Nathan Stooke
Hello, But AMD was. LOL -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Wednesday, March 31, 2010 11:05 AM To: WISPA General List Subject: Re: [WISPA] Tranzeo to acquire Aperto Not all buy outs

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Josh Luthman
Really? I hadn't heard that before. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 3:06 PM, Nathan Stooke

[WISPA] ubnt bridging

2010-03-31 Thread Data Technology
I have an M5 bullet in station bridge mode. This is connected on the ethernet side to an MT router. Thru another port on the MT router I am nating an office. The office computers work fine. I am now trying to route a small subnet to another port on the MT router in order to feed a local

[WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kosinet Wireless
We've been primarily an Alvarion WISP in the past, but decided to use higher speed / lower cost gear for our expansion. Went with the Tranzeo 2.4 stuff for a new POP recently. Connected our first Client out there. After we read all of the words and realized that Vertical Polarity was the other

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Mike Hammett
ATI couldn't build a quality driver to save their life, so I have refused to purchase any ATI based motherboard or video card. NVidia only. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: Josh Luthman

Re: [WISPA] ubnt bridging

2010-03-31 Thread Faisal Imtiaz
Change both the Ap CPE (Ubiquity) from reguar to WDS mode... (WDS is the transparent bridge mode on these units). Faisal. On 3/31/2010 3:14 PM, Data Technology wrote: I have an M5 bullet in station bridge mode. This is connected on the ethernet side to an MT router. Thru another port on the

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Josh Luthman
Yes. IME the whole Ethernet world of Tranzeo is just...bad... The plastic boot never sealed for me. I thought it had on the last radio but I came to find out that it was filling with water (though working GREAT for years). If I were you I'd make sure there is no obvious water build up and then

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Robert West
DFS enabled on any of them? There was something about DFS issues, I think before the 3.3 firmware. Anyone know if that was fixed in 3.3? Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Wednesday, March 31,

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Justin Wilson
Seen it many times. Tranzeo is notorious with me for weak ethernet. -- Justin Wilson j...@mtin.net http://www.mtin.net http://www.metrospan.net From: Kosinet Wireless wirel...@kosinet.com Reply-To: WISPA General List wireless@wispa.org Date: Wed, 31 Mar 2010 15:22:41 -0400 To: WISPA

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Greg Ihnen
Why aren't you using WDS on the site B-C link? Greg On Mar 31, 2010, at 1:16 PM, Forbes Mercy wrote: Thanks for the interest in helping here is the info: Site A RB532A board AR5212 chip v3.30 OS Running as an AP Bridge Running WDS and Nstreme Site B to Site A RB133 board A5413 chip

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
The AP is MT but I don't think that is a problem. MT and UBNT wds work together best I remember. What is the down side to using WDS on the AP? Will the other users on the AP have any performance issues due to using WDS? LaRoy McCann Data Technology Faisal Imtiaz wrote: Change both the Ap CPE

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Greg Ihnen
Do you mean that at site A when your system is in trouble you are able to communicate with the 433 over the wired connection? What about sites B and C? When the tech gets on scene does he have access to the gear that's down via ethernet? Does the gear respond? Greg On Mar 31, 2010, at 12:36

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Greg Ihnen
I bought an amp from them once (before I knew better) and they only sold it to me because I was taking it out of the country (they took my word on it). Greg On Mar 31, 2010, at 2:24 PM, RickG wrote: I tried to order one of these to make up for coaxial loss on one of my towers. They wouldnt

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kosinet Wireless
It's a new radio / install. We've replaced the radio / ends / power supply / poe splitter / router / patch cable to the router. The Tranzeo AP at the POP hasn't has so much as burped - It's been rock solid. I've got a Tranzeo at my house, up the tower with 50 + feet of cat5 with a stock power

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Justin Wilson
We bought out a company several years ago. They had some Hyperlink 2 watt 900MHZ amps. I can only imagine how much ³damage² those could do if they were hooked to an Omni. Sheesh. -- Justin Wilson j...@mtin.net http://www.mtin.net http://www.metrospan.net From: Greg Ihnen

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Josh Luthman
Can you force them to 100F or 10F? I would try 10F to see if that solves the problem first. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kosinet Wireless
We've tried all of the settings available - Auto, 100, 10, etc., etc., etc. - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: WISPA General List wireless@wispa.org Sent: Wednesday, March 31, 2010 3:52 PM Subject: Re: [WISPA] Speaking of Tranzeo.. Can you

Re: [WISPA] ubnt bridging

2010-03-31 Thread Greg Ihnen
Is the subnet outside the scope of the ip range the bullet is on? In other words is the bullet on a /24 for example and does the subnet fall within that /24? Greg On Mar 31, 2010, at 2:44 PM, Data Technology wrote: I have an M5 bullet in station bridge mode. This is connected on the

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Josh Luthman
What about the router? Has this been changed at all? Can you try a dumb layer 2 switch between the two? What are you using to determine the Ethernet connectivity is lost? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final,

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Stuart Pierce
I guess the obvious, have you changed routers yet ? -- Original Message -- From: Kosinet Wireless wirel...@kosinet.com Reply-To: WISPA General List wireless@wispa.org Date: Wed, 31 Mar 2010 15:22:41 -0400 We've been primarily an Alvarion WISP in the past,

Re: [WISPA] ubnt bridging

2010-03-31 Thread Greg Ihnen
If one end is WDS AP and the other end (the bullet) is WDS Station then there won't be any issues. If you set the bullet to WDS AP as well then you'll half your throughput. Greg On Mar 31, 2010, at 3:08 PM, Data Technology wrote: The AP is MT but I don't think that is a problem. MT and UBNT

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Justin Wilson
We have seen Tranzeos have bad negotiation issues. We stopped using Tranzeo with the newer GIG port Mikrotiks. They simply wont keep the link. We advise our clients to either keep some 450 10/100 boards on stock or swap out the tranzeos rather than hooking up to a Gig port. I know what you

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kosinet Wireless
Yep - Tried another Router - Haven't tried a switch yet.. - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: WISPA General List wireless@wispa.org Sent: Wednesday, March 31, 2010 3:57 PM Subject: Re: [WISPA] Speaking of Tranzeo.. What about the router?

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
Completely different subnets. AP x.x.x.65/26 (64-127) Bridged Bullet x.x.x.126/26 Local MT x.x.x.125/26 Trying to route x.x.x.192/28 (192-207) from AP to Local MT x.x.x.125 LaRoy McCann Data Technology Greg Ihnen wrote: Is the subnet outside the scope of the ip range the bullet is on?

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Steve Barnes
These guys always whine about Tranzeo's cover and seals. If you just don't over tighten them and make sure the seal is on right at the top they work great. I have 450 of them out with only 3 water issues in 3 years. All those were installer overzealous with a nut driver or putting to much

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Michael Baird
How about the Tranzeo hardware reset to defaults. (One of the reasons we dumped them a while back, that and Ubiquiti came to market at half the price/better performance). Regards Michael Baird Yes. IME the whole Ethernet world of Tranzeo is just...bad... The plastic boot never sealed for

Re: [WISPA] ubnt bridging

2010-03-31 Thread Michael Baird
That does not matter, the Bullet is in bridge mode. Regards Michael Baird Is the subnet outside the scope of the ip range the bullet is on? In other words is the bullet on a /24 for example and does the subnet fall within that /24? Greg On Mar 31, 2010, at 2:44 PM, Data Technology wrote:

Re: [WISPA] What Dual Lan Router

2010-03-31 Thread Faisal Imtiaz
Mikrotik PF-Sense Syswan All would do the trick. Faisal. On 3/31/2010 2:47 PM, Nick Olsen wrote: Depends on what you want to do with it. In terms of what to use both connections for. Failover, Load Balancing...etc... I've had good luck with the mikrotik PCC stuff when it comes to 2

Re: [WISPA] ubnt bridging

2010-03-31 Thread Stuart Pierce
Shouldn't matter bridged, I've got different networks running through bridged bullets and not in WDS. -- Original Message -- From: Data Technology w...@dtisp.com Reply-To: WISPA General List wireless@wispa.org Date: Wed, 31 Mar 2010 15:09:57 -0500

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
Yeah, that brings back bad memories. I did that once(wds ap mode) and had nothing but problems. I will try the wds station mode and see how that works. LaRoy McCann Data Technology Greg Ihnen wrote: If one end is WDS AP and the other end (the bullet) is WDS Station then there won't be any

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Stuart Pierce
Ok router swapped out for a different mfg ? You didn't specifically say you replaced the poe, just power supply. -- Original Message -- From: Kosinet Wireless wirel...@kosinet.com Reply-To: WISPA General List wireless@wispa.org Date: Wed, 31 Mar 2010

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kosinet Wireless
This is not a water issue. New radio today, and it started acting up within 30 minutes. Our whole wireless network is bridged - we haven't seen issue like this with any other setup we have out there. The only component we haven't swapped out is the wire up to the radio. It's new

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kosinet Wireless
Different Router - Same mfg. Original (Worked with the Alvarion Radio for 2+ years) Netgear FVS318 - Installed a new Netgear FVS338 as a test piece today with the same results. The last thing today was to replace the POE splitter and patch cable to the Router. - Original Message -

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
One thing I have noticed is that when I ping the local MT box (x.x.x.125) ip from the AP I get a reply and I also see icmp traffic on the local MT with torch. If I ping the ip of the subnet that I am trying to route to the local MT box (x.x.x.194) I get several reply's back from x.x.x.126

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Ron Calhoun
I run Tranzeo gear in the 5Ghz band and I've had the same issues. Try rolling the firmware on the radio back to an earlier version even thought it's new out of the box. I have had two whole shipments with 5.0.2 that did the exact same thing for me. Needless to say, they all have 3.6.7 now and are

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Steve Barnes
5.0.4 is working great for me. Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Ron Calhoun Sent: Wednesday, March 31, 2010 4:37 PM To: WISPA General List Subject: Re: [WISPA] Speaking of

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Matt Larsen - Lists
I have had issues on FM Towers that cause problems with ethernet - not just with Tranzeo either. We are getting ready to run fiber up an FM tower in the next two weeks to resolve ongoing ethernet issues. One of the FM stations most likely has an antenna going bad that is causing the

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Scott Reed
Do the radios show link connection before you reboot? If so, have you tried to MAC telnet into them? I have a couple that would show down but I could MAC telnet into them. All of the onboard functions worked. Then I tried to ping something else and got a buffer overflow error. Reboot would

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Ryan Spott
The best way to describe how to tightnen these covers is to NOT use a tool... ever. Press the cover closed near the stud... press it hard against the back plate of the radios squishing the foam. Hand tighten the nut as far as you can. Let go of cover, let the foam expand a bit. Done. DO NOT over

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Josh Luthman
Actually I did find the best solution for water leaks but it took some time. Full guide here: http://tinyurl.com/y9btdjl Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Ryan Spott
Was it time between announcement and ACTUAL delivery? :P ryan On Wed, Mar 31, 2010 at 5:04 PM, Josh Luthman j...@imaginenetworksllc.comwrote: Actually I did find the best solution for water leaks but it took some time. Full guide here: http://tinyurl.com/y9btdjl Josh Luthman Office:

Re: [WISPA] 2.4/5.x GHz load balancing

2010-03-31 Thread Rogelio
On Wed, Mar 31, 2010 at 7:55 AM, Justin Wilson li...@mtin.net wrote:    You can use connect lists in Mikrotik to force clients to connect at minimum levels. This way you don’t have to worry so much about the band, but meeting those minimum levels.  I am assuming you are working this into a

Re: [WISPA] Oh this business, tell me again why we love it?!

2010-03-31 Thread Tom DeReggi
Bob, I fully agree with your point. FCC enforcement is not the best method for promptly curing illegal interference that is harming one's operations. The process does not move fast enough for that. I know if I have not resolved such interference within the day, I've lost the subscribers. There

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Terry Hickey
- Original Message - From: Kosinet Wireless wirel...@kosinet.com To: WISPA General List wireless@wispa.org Sent: Wednesday, March 31, 2010 1:54 PM Subject: Re: [WISPA] Speaking of Tranzeo.. We've tried all of the settings available - Auto, 100, 10, etc., etc., etc. - Original

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Terry Hickey
Force the equipment it is connected to to 10 Mb. - Original Message - From: Kosinet Wireless wirel...@kosinet.com To: WISPA General List wireless@wispa.org Sent: Wednesday, March 31, 2010 1:54 PM Subject: Re: [WISPA] Speaking of Tranzeo.. We've tried all of the settings available -

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Josh Luthman
Very good one - didn't think about that =) Actually it's because I replaced Tranzeo 2.4 stuff with Mikrotik ARC kits (EXPENSIVE). I had not heard of Ubiquiti until the list I think... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not

Re: [WISPA] ubnt bridging -- solved

2010-03-31 Thread Data Technology
Well, I set the AP to use WDS and the bullet to station wds and now everything works ok. LaRoy McCann Data Technology Data Technology wrote: One thing I have noticed is that when I ping the local MT box (x.x.x.125) ip from the AP I get a reply and I also see icmp traffic on the local MT

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Forbes Mercy
They do not show registered at the site that feeds them so no, something is causing them is dissociate. Thanks for the input, Forbes On 3/31/2010 1:50 PM, Scott Reed wrote: Do the radios show link connection before you reboot? If so, have you tried to MAC telnet into them? I have a couple

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Tom DeReggi
Well. Aperto's current backlog of all purchase orders is US$8.3 million. This will be added to Tranzeo's current backlog of US$32.7M. Tranzeo will issue common shares to the stockholders of Aperto based on a US$5 million base consideration amount, as adjusted for liabilities and cash of

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Forbes Mercy
Excellent question, we have never tried that yet, we simply reboot. It's 400 people down so we kind of hurry, next time we will. On 3/31/2010 12:39 PM, Greg Ihnen wrote: Do you mean that at site A when your system is in trouble you are able to communicate with the 433 over the wired

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Forbes Mercy
last year we had problems in passing traffic and we were instructed by a fellow WISP to do it this way. Its worked for about 8 months with no problem until this started happening. Perhaps we should make them all the same, we're considering that as one of the fixes. Forbes On 3/31/2010

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Tom DeReggi
Well, I fully agree that there was a time in history when ATI conflicted with every other thing, and Nvidia just worked. But in today's world, I'm finding Nvidia to be almost just as bad.(And I'm a Nvidia fan) Now, my ATI cards seem to just work. I'm not talking about gaming compatibilty. I'm

Re: [WISPA] Tranzeo to acquire Aperto

2010-03-31 Thread Blair Davis
Their hardware was great, just had to wait for LightSpeed to re-write the drivers!! Mike Hammett wrote: ATI couldn't build a quality driver to save their life, so I have refused to purchase any ATI based motherboard or video card. NVidia only. - Mike Hammett Intelligent Computing

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Chuck Profito
Forbes, Hope the rest of the list doesn't think I'm nuts: Do you see any large, hi gain CB or Ham beam antennas or Truckers from the southern area parked or loading nearby? Within say 1/4 mile of B tower? The new mobile 70KW class C Linear's are about as dirty as they come. Some of those

Re: [WISPA] Does anybody have any ideas?

2010-03-31 Thread Chuck Bartosch
Chuck, You hope we don't *think* you're nuts?! coughknowcough ;-) Chuck On Mar 31, 2010, at 9:48 PM, Chuck Profito wrote: Forbes, Hope the rest of the list doesn't think I'm nuts: Do you see any large, hi gain CB or Ham beam antennas or Truckers from the southern area parked or loading

Re: [WISPA] Speaking of Tranzeo......

2010-03-31 Thread Kurt Fankhauser
I have 350+ Tranzeo CPE's in the field. Love em, The AP's are good too, pretty much set and forget, but I use MT for AP's because I love MT's goodies. But for a non-tech savy person I would not hesitate to advise them to deploy a Tranzeo AP. A lot of people bash Tranzeo but actually the company

  1   2   >