Re: [WISPA] StarOS CBQ

2009-10-21 Thread Data Technology
If you use CPE that is a router there is only 1 ip address used but for a CPE bridge you are using 2 ip address's (1 for the CPE and 1 for the customer). This is why you have to use the customer ip on a CPE bridge. LaRoy McCann Data Technology RickG wrote: Currently, we have StarOS/WRAP (v2

Re: [WISPA] Canopy AND WiFi beater! -- Retro Encabulator

2009-10-22 Thread Data Technology
://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean. WISPA Wants You! Join

Re: [WISPA] Link stability

2009-10-26 Thread Data Technology
. But it could be on either tower. LaRoy McCann Data Technology Mark McElvy wrote: They have had radome covers since installed Mark -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of jp Sent: Monday, October 26, 2009 3:37 PM To: WISPA

Re: [WISPA] Amateur repeater on a wisp tower -- gotchas?

2009-10-27 Thread Data Technology
on multiple frequencies but not always on the same frequencies and not every day or not all day long. I figure is is digital spurious emissions from the wireless rf. So not problems to you, just possible problems for the Hams. LaRoy McCann , N5OHO Data Technology AJ wrote: Depends on the band

Re: [WISPA] Has the guy who invented the u.fl connector been lynched yet?

2009-10-27 Thread Data Technology
and I can feel when it is in place. Then just push it down and it will snap in place. LaRoy McCann Data Technology RickG wrote: Josh, To each his own. It may be frustrating but It's not that hard! -RickG On Tue, Oct 27, 2009 at 2:28 PM, Josh Luthman j...@imaginenetworksllc.com wrote

Re: [WISPA] DMCA - copyright infringement

2009-11-10 Thread Data Technology
Do we have to do the logging or just give them a port to connect their magic box into so they can record everything? LaRoy McCann Data Technology Jerry Richardson wrote: no it's not. but a subpoena means drop everything and do it now. I'd rather be prepared to comply Sent from my iPhone

Re: [WISPA] Nano Sation 2

2009-11-11 Thread Data Technology
and dangerous content by the Data Technology MailScanner, and is believed to be clean. WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] NanoStation External Antenna

2009-11-18 Thread Data Technology
Archives: http://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean. WISPA

Re: [WISPA] NanoStation External Antenna

2009-11-18 Thread Data Technology
: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean

Re: [WISPA] Reset StarOS

2009-11-18 Thread Data Technology
/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean. WISPA Wants You! Join today! http://signup.wispa.org

[WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
the distance if the default route is set by the dhcp-client. I have looked at some of the examples on the wiki but they all use static ip address and I am wanting to use dhcp. Anyone have any pointers? Thanks LaRoy McCann Data Technology

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
Sounds too easy :) I'll give it a try. Thanks LaRoy e...@wisp-router.com wrote: Just change the nat to use the other public ip since your already masquerading just change that rule to src-nat and set the public ip to src-nat to. /Eje --Original Message-- From: Data Technology

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
it. It has worked very well for me. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Tue, Dec 1, 2009 at 4:01 PM, Data Technology w...@dtisp.com wrote

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Tue, Dec 1, 2009 at 4:29 PM, Data Technology w...@dtisp.com wrote: Josh, That is what I was trying to do

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Tue, Dec 1, 2009 at 5:17 PM, Data Technology w...@dtisp.com wrote: Yeah, when I looked at the article you listed it clicked. I

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
sources. --- Albert Einstein On Tue, Dec 1, 2009 at 5:17 PM, Data Technology w...@dtisp.com wrote: Yeah, when I looked at the article you listed it clicked. I don't use the command line except when I have to so I was a little off on the command to change the distance setting. I have

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Tue, Dec 1, 2009 at 5:45 PM, Data Technology w...@dtisp.com wrote: Yes the dsl modem is handing out a dhcp

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
[mailto:wireless-boun...@wispa.org] On Behalf Of Data Technology Sent: Tuesday, December 01, 2009 2:46 PM To: WISPA General List Subject: Re: [WISPA] suggestions for dual wan dhcp auto fail over Yes the dsl modem is handing out a dhcp address. I figure I will have to ping way back upstream

Re: [WISPA] suggestions for dual wan dhcp auto fail over

2009-12-01 Thread Data Technology
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Data Technology Sent: Tuesday, December 01, 2009 5:03 PM To: WISPA General List Subject: Re: [WISPA] suggestions for dual wan dhcp auto fail over Josh Luthman wrote: I was thinking

Re: [WISPA] Lanyards and Rebar Hooks

2009-12-09 Thread Data Technology
Archives: http://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean. WISPA Wants

Re: [WISPA] Lanyards and Rebar Hooks

2009-12-09 Thread Data Technology
to it so did not have to worry about loosing a 2x4. LaRoy McCann Data Technology Scott Reed wrote: Since I am not the one that does our tower work, I will let my curiosity ask, how do you use the tower jack? Data Technology wrote: Robert, I just bought one of these a couple of months ago

Re: [WISPA] Lanyards and Rebar Hooks

2009-12-09 Thread Data Technology
It also works on Rohn 45 Scott Reed wrote: Duh! I looked at that picture and just went on the products page. Should have realized it was showing how to use it. Data Technology wrote: Scott, Take a look at the picture on the home page. http://www.superiormusic.com/towerjack.htm

Re: [WISPA] ip addresses

2009-12-15 Thread Data Technology
they are planning on giving me a /21 + the 9th block of addresses. Maybe I should not look a gift horse in the mouth!! LaRoy Matt Jenkins wrote: A /21 is 8 blocks of IP addresses. So if it starts at x.x.56.0 then it would end at x.x.63.255 - Matt Data Technology wrote: Correction to the starting

[WISPA] UBNT M5 series nanostation

2009-12-18 Thread Data Technology
I have not used any UBNT M series units yet so I have a couple of questions. Is an NS M5 compatible with Mikrotik 802.11N or does it have to be used with the Rocket M basestation? Can it be used with Mikrotik 802.11A? LaRoy McCann Data Technology

Re: [WISPA] UBNT M5 series nanostation

2009-12-18 Thread Data Technology
-Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Data Technology Sent: Friday, December 18, 2009 11:53 AM To: WISPA General List Subject: [WISPA] UBNT M5 series nanostation I have not used any UBNT M series units yet so I have a couple

Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor with UBNT radios or Mikrotik?

2010-01-11 Thread Data Technology
Yes you can. You have to move the ground jumper. Just loosen the nuts and move the jumper to the hole with no copper. The jumper will short out the + voltage to ground. LaRoy McCann Data Technology Scott Carullo wrote: Not sure if it matters that the voltage + and - are swapped... Thanks

Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor with UBNT radios or Mikrotik?

2010-01-11 Thread Data Technology
. As an alternative Citel also makes a nice outdoor mountable unit specifically for wifi pin-outs, about the same cost ($25ish). They have both 60Vand 35V models. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Data Technology w...@dtisp.com

Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor with UBNT radios or Mikrotik?

2010-01-11 Thread Data Technology
had an AP go dead a couple of months ago. When I opened the enclosure there was water in the bottom of the enclosure and the surge suppressor was actually melted from the connector shorting out, but the MT board was fine. LaRoy McCann Data Technology Josh Luthman wrote: I know it isn't said

Re: [WISPA] Anyone ever mount gear on flagpole style tower?

2010-01-12 Thread Data Technology
: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean

Re: [WISPA] Anyone ever mount gear on flagpole style tower?

2010-01-12 Thread Data Technology
are never going to climb acell flagpole like in the video. Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Data Technology w...@dtisp.com Date: Tue, 12 Jan 2010 12:10:21 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Anyone ever mount gear

Re: [WISPA] Condolences and prayers for the people Haiti

2010-01-13 Thread Data Technology
I live on Crowley's Ridge which was formed from the Mew Madrid earth quake. My house is only about 17 miles from the fault zone. Lets hope the big one doesn't hit. LaRoy McCann Data Technology Trumann, AR 72472 Mike wrote: Prayers to all the good people of Haiti. This is an awful event

Re: [WISPA] Semi-OT Cisco PoE

2010-01-13 Thread Data Technology
for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean. WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] Condolences and prayers for the people Haiti

2010-01-13 Thread Data Technology
: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- This message has been scanned for viruses and dangerous content by the Data Technology MailScanner, and is believed to be clean

Re: [WISPA] MT backup system, need script clues

2009-06-24 Thread Data Technology
Make sure the software versions match. I ran into this once. Some commands were different between versions and the export commands did not work. LaRoy McCann Data Technology 1704 Hwy 69 Trumann, AR 72472 Josh Luthman wrote: From and to a 450 you should (hopefully) be able to use the binary

[WISPA] Changing cards in Mikrotik

2009-08-24 Thread Data Technology
just took out the old card, put in the new one and the users were passing traffic before I could close the lid. This was one of the few good things I liked about StarOS. Ok, just feels good to rant and rave every now and then. LaRoy McCann Data Technology www.dtisp.com

Re: [WISPA] Changing cards in Mikrotik

2009-08-24 Thread Data Technology
assume its the same freq, same power output etc. I think its actually better it lets you set it up instead of assuming a like replacement. My 2 cents Scott Carullo Brevard Wireless 321-205-1100 x102 Original Message From: Data Technology w...@dtisp.com Sent: Monday

Re: [WISPA] The Net Neutrality speech we've all been waiting for

2009-09-21 Thread Data Technology
McCann Data Technology David E. Smith wrote: http://openinternet.gov/read-speech.html In addition to the four classic Network neutrality principles, the FCC plans to pursue two more. Quotes from the speech: * The fifth principle is one of non-discrimination -- stating that broadband

[WISPA] Which connector is which on R52N

2009-10-07 Thread Data Technology
not available when I bought the card. I assume this will work ok as long as both TX and RX chains are set to the same setting. Thanks, LaRoy McCann Data Technology WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] Which connector is which on R52N

2009-10-07 Thread Data Technology
then connect to J3. David E. Smith wrote: Data Technology wrote: Also, I am looking to use this card with just 1 antenna. Not looking to use 'N', just using because cm9's were not available when I bought the card. I assume this will work ok as long as both TX and RX chains are set

Re: [WISPA] Which connector is which on R52N

2009-10-08 Thread Data Technology
-mode, or B/G mode. On Wed, Oct 7, 2009 at 3:09 PM, Data Technology w...@dtisp.com wrote: Yeah, I forgot to mention the board and OS. It's an RB433AH with 4.0rc1. If you are looking down at the card with the connectors at the top and the gold pins at the bottom, J2 is on the upper left

[WISPA] ack settings

2010-05-14 Thread Data Technology
I have MT for access points and mostly UBNT for client units. Just wondering about the proper way to set the ack on the CPE. I have always just set it for a little further than the customer on the UBNT side and left the MT side to dynamic. This was set differently for each customer. One

Re: [WISPA] Changign DHCP timeout XP/WIn7

2010-08-20 Thread Data Technology
, it is changed. You don't have to reboot, well you do for w98 but not xp. This even configures wireless cards. LaRoy McCann Data Technology On 8/20/2010 2:44 PM, John Valenti wrote: Justin, I don't quite understand what you are trying to do, so I can't offer suggestions. Can you elaborate? (I

[WISPA] mikrotik vs ubiquiti

2010-09-03 Thread Data Technology
protection in the enclosure. What are you guys seeing in the real world as the performance and reliability of Rockets? Any do and don'ts would be greatly appreciated here. Thanks and have a great Labor Day. LaRoy McCann Data Technology

Re: [WISPA] Tower Climb video

2010-09-17 Thread Data Technology
Just wondering about the cost of these training classes and how long are they? On 9/17/2010 9:47 AM, Josh Luthman wrote: Just took the Comtrain class last week. 3000 for restraint, 5000 for arrest. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH

Re: [WISPA] Convert Single Pol to Dual Pol

2010-09-20 Thread Data Technology
I think this is what you want. http://store.wisp-router.com/catalog/partdetail.aspx?partno=DA5W-29-DP-FEED On 9/20/2010 3:05 PM, Chris Gotstein wrote: I'm having a heck of a time finding the dual pol feed horns. Anyone have a part number for them? Chris Gotstein,

Re: [WISPA] Routing Help [Default Route to OSPF]

2010-02-11 Thread Data Technology
Could it be a firewall rule? Paul Gerstenberger wrote: Same story, I disabled OSPF on both devices (but both are still on the 10.0.4.0 network) put this route in the riverstone: ip add route yyy.yyy..0/24 gateway 10.0.4.3 and this in the mikrotik: ip route add

Re: [WISPA] Routing Help [Default Route to OSPF]

2010-02-11 Thread Data Technology
misconfiguration. -Paul On Feb 11, 2010, at 9:47 AM, Data Technology wrote: Could it be a firewall rule? Paul Gerstenberger wrote: Same story, I disabled OSPF on both devices (but both are still on the 10.0.4.0 network) put this route in the riverstone

[WISPA] iPhone ssh app

2010-03-11 Thread Data Technology
be appreciated. LaRoy McCann Data Technology WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org

Re: [WISPA] iPhone ssh app

2010-03-11 Thread Data Technology
iPhone apps for WISP operations would be appreciated. LaRoy McCann Data Technology --- --- --- --- WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] iPhone ssh app

2010-03-11 Thread Data Technology
Justin Wilson wrote: The only benefit I have seen so far of Jailbreaking an iphone is being able to tether it. Every App I have wanted to run I can find in the store. Justin I had thought that would be a great thing to have, then I could connect the laptop and have a bigger

[WISPA] ubnt bridging

2010-03-31 Thread Data Technology
don't want to get away from MT for network control. LaRoy McCann Data Technology WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
The AP is MT but I don't think that is a problem. MT and UBNT wds work together best I remember. What is the down side to using WDS on the AP? Will the other users on the AP have any performance issues due to using WDS? LaRoy McCann Data Technology Faisal Imtiaz wrote: Change both the Ap CPE

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
Completely different subnets. AP x.x.x.65/26 (64-127) Bridged Bullet x.x.x.126/26 Local MT x.x.x.125/26 Trying to route x.x.x.192/28 (192-207) from AP to Local MT x.x.x.125 LaRoy McCann Data Technology Greg Ihnen wrote: Is the subnet outside the scope of the ip range the bullet

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
Yeah, that brings back bad memories. I did that once(wds ap mode) and had nothing but problems. I will try the wds station mode and see how that works. LaRoy McCann Data Technology Greg Ihnen wrote: If one end is WDS AP and the other end (the bullet) is WDS Station then there won't be any

Re: [WISPA] ubnt bridging

2010-03-31 Thread Data Technology
it is trying to reply to instead of bridging it. I don't see any option on the bullet to enable / disable proxy-arp. I know sometimes I need proxy-arp on my AP's to make things work. LaRoy McCann Data Technology Stuart Pierce wrote: Shouldn't matter bridged, I've got different networks running through

Re: [WISPA] ubnt bridging -- solved

2010-03-31 Thread Data Technology
Well, I set the AP to use WDS and the bullet to station wds and now everything works ok. LaRoy McCann Data Technology Data Technology wrote: One thing I have noticed is that when I ping the local MT box (x.x.x.125) ip from the AP I get a reply and I also see icmp traffic on the local MT

Re: [WISPA] Pan flutes on the tower

2010-04-05 Thread Data Technology
McCann Data Technology Mike wrote: A while back, the amateur community talked me into putting a ham antenna on my highest tower. It is a dual band 2 meter 70 cm DC grounded unit (as per my specs). I built a mount which offsets the stick a couple feet from the tower. A piece of 1 inch PVC

Re: [WISPA] Pan flutes on the tower

2010-04-05 Thread Data Technology
but I have not been overly impressed with it. 73's LaRoy McCann, N5OHO Data Technology Mike wrote: LaRoy: (and others) Thanks for your analysis and feedback. The more I look, listen and observe, the more I believe you guys have found the melodic culprit. When I put up the amateur

Re: [WISPA] OT: Rohn 25G Tower Help

2010-04-08 Thread Data Technology
Chuck, Here is a link to their site. Looks like they have changed the site but if you download the Rohn 25 brochure you will find what you are looking for. http://www.rohnnet.com/rohn-25g-tower LaRoy McCann Data Technology Chuck Hogg wrote: We purchased a WISP and are doing tower maintenance

Re: [WISPA] OT: Rohn 25G Tower Help

2010-04-08 Thread Data Technology
All Rohn tower books I have had show 80% of vertical height for the anchor post. On some towers/heights they go to 2 sets of anchor posts. Even the brochure they have on their site still shows that, 120' for 150' tall tower with 5 sets of guys.

Re: [WISPA] OT: Rohn 25G Tower Help

2010-04-08 Thread Data Technology
Chuck, I guess I should have read all of you post. I now see that you mentioned that you found the 120' requirement but were looking for engineering for closer spacing. Data Technology wrote: All Rohn tower books I have had show 80% of vertical height for the anchor post. On some towers

Re: [WISPA] WISPA booth at MUM

2010-10-08 Thread Data Technology
How well you think this grid will work? lol http://mum.mikrotik.com/gallery/v/US10/MUM_US_10150.jpg.html On 10/8/2010 8:37 AM, Justin Wilson wrote: http://mum.mikrotik.com/gallery/v/US10/MUM_US_10109.jpg.html http://mum.mikrotik.com/gallery/v/US10/MUM_US_10110.jpg.html Forbes -- Justin

Re: [WISPA] WISPA booth at MUM

2010-10-08 Thread Data Technology
Well, as my wife always tells me, did you read the directions? On 10/8/2010 10:40 AM, Butch Evans wrote: On Fri, 2010-10-08 at 10:31 -0500, Data Technology wrote: How well you think this grid will work? lol http://mum.mikrotik.com/gallery/v/US10/MUM_US_10150.jpg.html Now THAT is funny

Re: [WISPA] {Disarmed} Re: WISPA booth at MUM

2010-10-08 Thread Data Technology
of these and was surprised how well it worked. On Fri, Oct 8, 2010 at 11:31 AM, Data Technology w...@dtisp.com mailto:w...@dtisp.com wrote: How well you think this grid will work? lol http://mum.mikrotik.com/gallery/v/US10/MUM_US_10150.jpg.html On 10/8/2010 8:37 AM, Justin Wilson

Re: [WISPA] PtP Dish Alignment

2010-10-19 Thread Data Technology
I just did a ptp install of 5g 2ft rocket dishs at 6.47 miles and could not see either tower. Now I already had a ptp link to another tower from tower 1 so this helped. I used Google Earth to map out the points and then used the ruler to connect each ptp link. I took the map with me on tower

Re: [WISPA] PtP Dish Alignment

2010-10-19 Thread Data Technology
Cool Idea. On 10/19/2010 11:12 AM, ~NGL~ wrote: I run up a 3 foot helium balloon and use a pair of binoculars. Works every time. NGL *From:* Data Technology mailto:w...@dtisp.com *Sent:* Tuesday, October 19, 2010 9:06 AM *To:* WISPA General List mailto:wireless@wispa.org

Re: [WISPA] PtP Dish Alignment

2010-10-20 Thread Data Technology
Don't forget to factor in the curvature of the earth ;) On 10/20/2010 1:05 PM, Josh Luthman wrote: So it's 50 foot higher and 10 miles away...what angle is that? On Oct 20, 2010 1:38 PM, Chuck Profito cprof...@cv-access.com mailto:cprof...@cv-access.com wrote: Come on Josh, get a couple

[WISPA] tower climbing helmets

2010-10-20 Thread Data Technology
Which helmet are you guys using for tower climbing. I am looking at the Petzl Vertex Vent or the PMI Alto Helmets. Also looking at the PMI Advantage but it looks heaver and I don't know if the brim of the helmet will get in the way.

Re: [WISPA] tower climbing helmets

2010-10-20 Thread Data Technology
wrote: Chin strap is a must. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 20, 2010 at 5:24 PM, Data Technology w...@dtisp.com mailto:w...@dtisp.com wrote: Which helmet are you guys using

Re: [WISPA] I must have angered the Power Supply Gods

2010-11-16 Thread Data Technology
I've lost a lot of cpe power supplies lately. On 11/16/2010 4:22 PM, Marco Coelho wrote: Is is just me or are others having serious power supply issues the last two months? I've lost 6 APC Smart UPS 1500 (5 bad batts, 1 Failed unit). We change batteries every two years as a preventative

Re: [WISPA] Weird one of the month

2010-11-22 Thread Data Technology
If your customer cpe is 2.4 Ghz it might be interference causing the wireless router not to work. I had that problem with a linksys unit that was only a channel or two from the cpe channel and it would not work. Tried 3 different units. Finally change the default channel on the router and it

[WISPA] UBNT 900 Gear

2010-12-17 Thread Data Technology
Has anyone been deploying the UBNT 900 gear? Just wondering how its working out? LaRoy McCann Data Technology WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] he.net

2011-01-03 Thread Data Technology
he.net works for me www.he.net does not work for me LaRoy McCann Data Technology On 1/3/2011 4:41 PM, ch...@htswireless.com wrote: It is down for me. I have Att.. Chris -Original Message- From: Matt Sent: Monday, January 03, 2011 1:43 PM To: WISPA General List Subject: Re

[WISPA] Internet Runs Out Of IP Addresses

2011-02-04 Thread Data Technology
http://www.informationweek.com/news/internet/policy/showArticle.jhtml?articleID=229201157cid=RSSfeed_IWK_All WISPA Wants You! Join today! http://signup.wispa.org/

[WISPA] Strange RF disconnect problem

2011-02-14 Thread Data Technology
that might be a problem but I don't think it would cause it to drop every 60 seconds. If you made it this far, thank for reading. LaRoy McCann Data Technology Trumann, AR WISPA Wants You! Join today! http

Re: [WISPA] Strange RF disconnect problem

2011-02-14 Thread Data Technology
After posting I recalculated what the signal strength should be and it turns out to be mid 50's. So I guess there is defiantly wrong in the rf system some where. On 2/14/2011 12:00 PM, Data Technology wrote: Sorry for the long post but I need some suggestions here guys. Customer has a 7.3

Re: [WISPA] Strange RF disconnect problem

2011-02-14 Thread Data Technology
. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Feb 14, 2011 at 1:10 PM, Data Technology w...@dtisp.com mailto:w...@dtisp.com wrote: After posting I recalculated what the signal strength should be and it turns out to be mid 50's. So I guess

Re: [WISPA] Strange RF disconnect problem

2011-02-14 Thread Data Technology
wireless 23dbi panel/enclosures. Very lightweight solution (compared to a two foot dish!) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Feb 14, 2011 at 2:16 PM, Data Technology w...@dtisp.com mailto:w...@dtisp.com wrote

Re: [WISPA] Strange RF disconnect problem

2011-02-14 Thread Data Technology
I have tried those in the past and not had good luck with them. They don't seem to be as sensitive as other cards. I used to use mostly cm9's but have been using the MT R52Hn cards. You get the power and they seem to receive better than the XR5's. LaRoy On 2/14/2011 2:26 PM, Josh Luthman

Re: [WISPA] Strange RF disconnect problem

2011-02-14 Thread Data Technology
experience shows the complete opposite and all other reports have agreed with me. Not arguing, just emerging facts. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Feb 14, 2011 at 3:41 PM, Data Technology w...@dtisp.com mailto:w