[WISPA] Trade/Sell Redline Backhaul

2008-10-23 Thread Don Annas
on this link and partial to Redline, Trango, and Canopy. So. $2,495 for the backhaul if someone can use it. If I don't hear from anyone on this soon, we'll go ahead and deploy it. Thanks. Don Annas 336.510.3800 x111 [EMAIL PROTECTED

[WISPA] Mikrotik 1 to 1 NAT question

2007-01-24 Thread Don Annas
using the alternate IP on the /27, when the devices send outbound traffic, it appears to be coming from the wan IP that is utilized for the global NAT pool instead of the IP that we are trying to translate it too. Any ideas? Thank you. Don Annas Triad Telecom, Inc. HYPERLINK mailto:[EMAIL

RE: [WISPA] Mikrotik 1 to 1 NAT question

2007-01-25 Thread Don Annas
rule you want to work. Cheers, P. Skyline Networks Consultancy Ltd www.skyline-networks.com -Original Message- From: Don Annas [mailto:[EMAIL PROTECTED] Sent: 25 January 2007 04:52 To: wireless@wispa.org Subject: [WISPA] Mikrotik 1 to 1 NAT question I have an office router/Mikrotik

[WISPA] Tranzeo 2.4

2007-01-29 Thread Don Annas
If anyone is running Tranzeo 2.4, I have about 4 of their 17db 90degree Horizontal sectors collecting dust. As well as a few of the 900MHz radios. It turns out the big city of Greensboro is not very RF friendly outside of the 5.3/5.8 range :-) _ Don Annas

[WISPA] Mikrotik issues with VLANs

2007-01-29 Thread Don Annas
Recently, we decided to run VLANs off of one of the Mikrotik routers to provide better port density. Basically routed vlans to a Cisco 2950 switch (one VLAN per AP). To our disappointment, we found that this scenario yielded packet loss even pinging between a hardwired radio and the Mikrotik. We

RE: [WISPA] OT: Small office VoIP phone systems

2007-02-05 Thread Don Annas
The SPA942 is a great phone for the money (not quite as nice as the Polycom 501 which isn't much more $. Regardless of which you use, an Asterisk PBX is the easiest and best solution for a system that size. Not only can connect your SIP handsets and 4 analog sets, you can build an IAX or SIP

RE: [WISPA] OT: Small office VoIP phone systems

2007-02-06 Thread Don Annas
Moses HIGH DESERT WIRELESS BROADBAND COMMUNICATION 16922 Airport Blvd # 17 Mojave CA 93501 661 824 3431 office 818 406 6818 cell -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Monday, February 05, 2007 8:02 PM To: [EMAIL PROTECTED

RE: [WISPA] OT: Small office VoIP phone systems -- SIP / IAX overthe Internet

2007-02-06 Thread Don Annas
? At VOIP 2.0, QOS and HD VOIP were hot topics. People are ready for something better than Vonage. And businesses are willing to pay for it. Your business name (brand and reputation) will be linked to any services you offer. Regards, Peter Radizeski RAD-INFO, Inc. (813) 963-5884 Don Annas wrote

[WISPA] BGP Question

2007-02-07 Thread Don Annas
as that peer is up, or preferably, allow traffic to enter whichever peer is the best route while forcing the return traffic back out the connection that the traffic entered. - Don Annas Triad Telecom, Inc. 336.510.3800 x111 [EMAIL PROTECTED] -- No virus found in this outgoing message. Checked

[WISPA] Speedtest with BGP

2007-02-07 Thread Don Annas
Of Butch Evans Sent: Wednesday, February 07, 2007 9:12 PM To: WISPA General List Subject: Re: [WISPA] BGP Question On Wed, 7 Feb 2007, Don Annas wrote: When peering with multiple providers, is it a requirement that you pick a primary to send and receive traffic or can you not prepend AS hops

RE: [WISPA] Mikrotik RB and Cisco Switch port sync problems

2007-02-10 Thread Don Annas
Let me grasp... so you are saying that the RB44s in an x86 are not truly separate ports but share a MAC address? - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dylan Oliver Sent: Saturday, February 10, 2007 12:26 AM To: WISPA General List

RE: [WISPA] Mikrotik RB and Cisco Switch port sync problems

2007-02-10 Thread Don Annas
for asking, but do you mean a RB44 in an x86 platform? (PCI to 4 port ethernet) If so - I can comment! If not - I will shut up. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Friday, February 09, 2007 7:05 PM To: wireless

[WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-14 Thread Don Annas
with this issue. Are their any tricks or best practices for a link this close? Is their a solution that I would not have this problem with. This customer needs a minimum of 5mb up and 5mb down and will be scaling to 10mb in about 2 months. Thanks. _ Don

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-14 Thread Don Annas
the latest firmware does that mean the beta su fw? I had one doing the same thing and the beta fixed it. On 2/14/07, Don Annas [EMAIL PROTECTED] wrote: We are running the Trango units (fairly successfully) at most of our locations. We have a new client that we turned up about a week ago

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-14 Thread Don Annas
How high is the AP? Maybe your under the signal. Can you install another SU for testing purposes further away? On 2/14/07, Don Annas [EMAIL PROTECTED] wrote: Yes, running the beta on the SU and AP. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RickG

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-15 Thread Don Annas
away things worked properly. Otherwide, the only other thing I can think of is a power issue. Of course there are other guys on this list who I'm sure can come up with some ideas. Whcih reminds me, did you try Trango's discussin list? On 2/14/07, Don Annas [EMAIL PROTECTED] wrote: The building

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-15 Thread Don Annas
, but every so often it would just crash. It was on a flat roof, sled mount that held the radio @ 24 off the roof. After trying everything, we raised the mount up to @ 4ft and it solved the problem. chris On 2/14/07, Don Annas [EMAIL PROTECTED] wrote: The building the SU is on is not much lower

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-15 Thread Don Annas
] On Behalf Of Don Annas Sent: Thursday, February 15, 2007 9:33 AM To: [EMAIL PROTECTED]; 'WISPA General List' Cc: Tim McCrickard Subject: RE: [WISPA] Trango 5850 FOX to 5830 AP at close range Interesting... So it is not a good practice in general to shoot across a flat roof without some height

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-15 Thread Don Annas
in the area? I know we have seen this issue in the 2.4 GHz range when someone nearby would get on the cordless handset. Todd Barber Skylink Broadband Internet [EMAIL PROTECTED] 970-454-9499 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-18 Thread Don Annas
: Re: [WISPA] Trango 5850 FOX to 5830 AP at close range I've seen many issues that were fixed by raising the antenna that was shooting to low over a rooftop... -RickG On 2/15/07, Don Annas [EMAIL PROTECTED] wrote: Interesting... So it is not a good practice in general to shoot across a flat roof

RE: [WISPA] Canopy sync pinout

2007-02-18 Thread Don Annas
Superior Wireless New Orleans,La. www.superior1.com - Original Message - From: Don Annas [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Sunday, February 18, 2007 9:16 AM Subject: [WISPA] Canopy sync pinout Does anyone know what the pin-out would be to make a sync cable

RE: [WISPA] Trango 5850 FOX to 5830 AP at close range

2007-02-18 Thread Don Annas
, February 18, 2007 12:02 PM To: WISPA General List Subject: Re: [WISPA] Trango 5850 FOX to 5830 AP at close range Don, Are they saying this is with all 5580's or just your particular unit? -RickG On 2/18/07, Don Annas [EMAIL PROTECTED] wrote: Good news (I think). Trango has found an issue

RE: [WISPA] VOIP Suggestions

2007-02-19 Thread Don Annas
clients - What regions are you looking to offer VoIP in. If you have the NPA-NXX it would be helpful - What equipment (if any) have you already purchased for this project - Have you put together any pricing models are do you have an idea what your local market will accept? _ Don

RE: [WISPA] VOIP Suggestions

2007-02-19 Thread Don Annas
. We have tried to partner with them but they said they won't be ready until this summer. A year ago they said it would be summer 2006. So basically I am not holding my breath. On 2/19/07, Don Annas [EMAIL PROTECTED] wrote: A few thoughts... :-) If you are going to roll it out on your own

[WISPA] need FOX5300

2007-02-20 Thread Don Annas
Anyone have any used Trango FOX5300s that they want to sell. I need one or two for a job. – reply off list please. Thanks. _ Don Annas 336.510.3800 x111 336.510.3801 fax HYPERLINK mailto:[EMAIL PROTECTED][EMAIL PROTECTED] HYPERLINK http

[WISPA] FYI: Trango 5580 issue

2007-02-20 Thread Don Annas
Fix is on the way.. Don, I just received an ETA on this problem. We believe to have found the issue and are in the process of fixing the problem. We have a firmware as soon as tomorrow. The firmware will be considered Beta and will still need further testing. If initial

[WISPA] 5.8 4FT Quickfire Dish

2007-02-20 Thread Don Annas
. _ Don Annas 336.510.3800 x111 336.510.3801 fax [EMAIL PROTECTED] www.TriadTelecom.com http://www.triadtelecom.com/ _ -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.412 / Virus Database

[WISPA] Trango reboot incident

2007-02-21 Thread Don Annas
Guys, this morning around 4:40 eastern, we had an odd incident occur. We had about 3 SUs reboot at the same time and then re-register. I checked each of the SUs and according to the uptime they all rebooted. This wouldn’t seem odd to me if it was just these 3 SUs as they are associated

RE: [WISPA] Trango reboot incident

2007-02-21 Thread Don Annas
regulating) UPS, then I'd guess you had a power spike. I've seen spikes reboot radios if when those radios were connected to dumb UPS's. - Larry - Original Message - From: Don Annas [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; 'WISPA General List' wireless@wispa.org Sent

[WISPA] New Trango 5850 Firmware

2007-02-22 Thread Don Annas
: Thursday, February 22, 2007 12:05 PM To: Don Annas Subject: RE: Firmware Don, I don’t have the link and so far it has past initial testing. I have attached the firmware and it should be considered BETA firmware. Please provide me with any feedback or issues you see with the firmware

[WISPA] Mikrotik 900MHz feedback

2007-03-20 Thread Don Annas
. _ Don Annas 336.510.3800 x111 336.510.3801 fax HYPERLINK mailto:[EMAIL PROTECTED][EMAIL PROTECTED] HYPERLINK http://www.triadtelecom.com/www.TriadTelecom.com _ -- No virus found in this outgoing message. Checked by AVG Free Edition. Version

[WISPA] Rackmount Mikrotik

2007-10-03 Thread Don Annas
are appreciated. Thanks. ___ Don Annas Triad Telecom, Inc. 336.510.3800 x111 336.510.3801 FAX [EMAIL PROTECTED] HYPERLINK http://www.TriadTelecom.comwww.TriadTelecom.com HYPERLINK https://msm.triadtelecom.com/NDDChat/Default.asp?url=http://www.triadteleco m.com

[WISPA] Cisco Wireless Bridges

2007-10-04 Thread Don Annas
Is anyone using the Cisco 1300 or 1400 series AP/Bridges? I know they are a bit pricing, but was curious how they performed in a noisy environment? ___ Don Annas Triad Telecom, Inc. 336.510.3800 x111 336.510.3801 FAX [EMAIL PROTECTED] HYPERLINK

RE: [WISPA] Cisco Wireless Bridges

2007-10-13 Thread Don Annas
Subject: Re: [WISPA] Cisco Wireless Bridges They work OK for us in the East San Francisco Bay area. They have the ability to move to a different channel if the noise gets too bad. JT Don Annas wrote: Is anyone using the Cisco 1300 or 1400 series AP/Bridges? I know they are a bit pricing

RE: [WISPA] short ptp link info

2007-10-13 Thread Don Annas
Trango and Bridgewave have options as well. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson Sent: Tuesday, October 09, 2007 11:56 PM To: [EMAIL PROTECTED]; WISPA General List Subject: [WISPA] short ptp link info Hi, I am looking for a

[WISPA] Tranzeo TR-FDD-32-GT

2007-10-19 Thread Don Annas
they actually worked to mitigate interference? Also, can the unit be deployed without the channel shield initially until an operating channel is decided on? Any and all comments appreciated… ___ Don Annas Triad Telecom, Inc. 336.510.3800 x111 336.510.3801 FAX

RE: [WISPA] Cisco Wireless Bridges

2007-10-21 Thread Don Annas
Technologies Don Annas wrote: Is anyone using the Cisco 1300 or 1400 series AP/Bridges? I know they are a bit pricing, but was curious how they performed in a noisy environment? ___ Don Annas Triad Telecom, Inc. 336.510.3800 x111

[WISPA] Trango Equipment

2008-05-22 Thread Don Annas
Guys, We made an internal decision to standardize on our RF equipment. As such, I have some Trango equipment available. If anyone is interested, contact me off list. I have about 20 of the FOX SUs in unopened boxes as well as 5.3/5.8 APs, 900 APs, and 5-10 900 SUs Sincerely, Don Annas

Re: [WISPA] Leasing company...

2008-06-01 Thread Don Annas
I've used TriLease for my clients and been happy with them. They are out of Raleigh, NC Here's the info: TriLease Brantley Denton 866.590.2220 [EMAIL PROTECTED] - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Butch Evans Sent: Sunday, June 01,

[WISPA] Spare Redline AN50

2008-06-10 Thread Don Annas
Guys, we have a spare Redline AN50 5.7 backhaul that we have replaced with a licensed link. If anyone is in need of one, contact me off list. Sincerely, Don Annas 336.510.3800 x111 [EMAIL PROTECTED] No virus found in this outgoing message. Checked by AVG. Version: 7.5.524

RE: [WISPA] Trango 900

2007-04-13 Thread Don Annas
We are seeing 2.2mb of actual throughput. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chris cooper Sent: Friday, April 13, 2007 11:21 AM To: 'WISPA General List' Subject: [WISPA] Trango 900 What is the non-vendor speak, actual production max

[WISPA] MikroTik Hardware

2007-05-27 Thread Don Annas
915 boards and the gig RB PCI cards. When testing with these, we do get minor packet loss that we do not get on the 532s or our Cisco routers. Any suggestions? Thanks. _ Don Annas 336.510.3800 x111 336.510.3801 fax HYPERLINK mailto:[EMAIL PROTECTED][EMAIL

RE: [WISPA] MikroTik Hardware

2007-05-27 Thread Don Annas
, as I have two very stable PC platform boxes with dual GigE ports that will push over 600Mbps without a problem. Travis Microserv Don Annas wrote: Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik OS on. I need the device to be able to handle around 200 MB

RE: [WISPA] Trango VOIP

2007-07-02 Thread Don Annas
We currently use the 5850 fox units for many of our SIP clients and it works well. Very important to turn off ARQ as that seems to cause issues. We use the Mikrotik at both ends to control QoS. - Don -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug

[WISPA] MikroTik RB532-A Clock Speed

2007-07-22 Thread Don Annas
the terminal with the ‘set cpu-frequency 399’ command. If I type print after, it says that the safe speed is 399 and the speed is 266. Any help on making this change would be much appreciated. Thanks - Don Annas No virus found in this outgoing message. Checked by AVG Free Edition