Looking for service in LA, near the home depot center. If you service this
area please email me.
Dustin Jurman
[EMAIL PROTECTED]
WISPA Wants You! Join today!
http://signup.wispa.org
Burnt Pine Plantation
1161 Blackwell Road
Newborn, GA 30056
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA
Yes I have, Even have one installed in my house. Long Story. What is your
question?
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of RC
Sent: Tuesday, December 02, 2008 10:16 AM
To: wireless@wispa.org
Subject: [WISPA] motorola bpl
Anyone have
Anyone Service METAIRIE LA,
Please send me an email off list.
Dustin
WISPA Wants You! Join today!
http://signup.wispa.org/
They both have Ethernet ports!
DSJ
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Sunday, December 14, 2008 4:16 PM
To: WISPA General List
Subject: Re: [WISPA] Vecima 3.65
I was told that Redlines's WiMax solution
But you need to go with what your safety device states to ward off any
liability.
Certified slings usually carries a nice variety of rope up to 2000 feet and
safety devices.
http://www.certifiedslings.com/home.php4
Be Safe!
Dustin
Dustin Jurman
CEO
Rapid Systems Corporation
1211 North
A combination of surge protection and proper grounding is the key. We
utilize a multi-point ground tester and find a large portion of our sites
have poor grounds (less then 5 Ohms to earth) or some crack head stole the
buss bars and copper. (Very likely in FLA). Testing has become part of our
Brian,
They knew way before. How high are you going up?
Dustin
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Brian Rohrbacher
Sent: Monday, January 05, 2009 9:46 AM
To: WISPA General List
Subject: Re: [WISPA] POE up AM radio tower
Doug
Our tower crews are allowed to pick and choose what they like for
Harness and Lanyards as long as it's approved by our safety manager.
They all choose the exofit harness by DBSALA with the seat. I prefer
this one as well. The new ones have a spring in the that makes the rear
ring stick up, very
Yes, you have an option through the setup wizard on the master side for
Link Symmetry
Options are, Symmetric Data Rate (1 to 1) Asymmetric Data Rate (2 to 1)
Dustin
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Alan Long
WISPA did have a group of people that were attending meetings and trying to
sway policy. The time schedule has just been published and hopefully rules
and definitions will be firmed up shortly.
WISPA could start delivering a facts sheet, Timeline and useful resources.
WISPA should get vendors
The Mobotix is the bomb. We use them at tower sites, in our office and I
have a tricked out system at home as well. DVR software is included and the
Camera's are truly edge devices. We actually run both the DVR, FTP and
capture with ONSSI at the same time. This allows us to have local
That's 114 a year, it's 9.50 a sub on a monthly rate.
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Peter R.
Sent: Tuesday, April 25, 2006 8:57 AM
To: WISPA General List
Subject: Re: [WISPA] Pioneering Wi-Fi City Sees Startup Woes
Bob Moldashel
No, Shriv is correct. You get banned if you have a problem with the
equipment and get stuck in a RMA / credit loophole which you can't get in
touch with anyone to help you. My experience after 10 years of doing
business with them was shocking.
DSJ
-Original Message-
From: [EMAIL
We're seeing the storm bands in Tampa now. Very wet.
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Joe Laura
Sent: Monday, June 12, 2006 12:03 PM
To: WISPA General List
Subject: Re: [WISPA] ALBERTO
We have earlier happy hours down here in the
Tom,
You have a lot of good points, but so does Charles and others, Why don't you
petition WISPA and some of the other ISP organization to sponsor a Net
Neutrality bakeoff. You can have views from the service provider aspects.
What needs and will come out of it in the end will be the
I've seen two dish elements go bad in the last couple of years.
Dustin Jurman
Rapid Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Brownson
Sent: Thursday, July 20, 2006 9:56 AM
To: WISPA General List
Subject: Re: [WISPA] antenna question
I remember the same thing about the movie the net. I was so pissed off
when they had Ip addresses in the 300's I can't even look at Sandra today
without thinking poser!
Then the movie firewall came out and Harrison Ford goes into a cisco pix
firewall and puts such a lame access list in that
Nice going Matt!!!
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Matt Liotta
Sent: Wednesday, September 27, 2006 11:29 AM
To: WISPA General List
Subject: [WISPA] BridgeWave Empowers One Ring to Rule Atlanta's Skies
Don, you talking about the AZ
event?
DSJ
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Renner
Sent: Thursday, September 28, 2006
10:58 AM
To: 'WISPA General List'
Subject: RE: Motorola membership
(Re: [WISPA] vendor specs -- Jon)
I will be in
Hey Marlon,
This may be a great opportunity for us to help some folks talk about
spectrum analyzers here. What are you using today? I'm using the anritsu
spectrum master. Expensive but I've been very happy with it. Maybe we
should get some bullet points together.
Dustin
-Original
)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
- Original Message -
From: Dustin Jurman [EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Tuesday, October 03, 2006 9:05 AM
Subject: RE: [WISPA] Diagnosing interference
Hey Marlon,
This may be a great
Matt can you send some links for those sources.
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Matt Liotta
Sent: Monday, December 04, 2006 12:55 PM
To: WISPA General List
Subject: [WISPA] Industry failings
One the biggest factors holding our
. We all know that once you build a site it takes some time to monetize
them, they seem a little behind but maybe not.
8. Wall street will keep feeding them as long as they are executing, and
they are doing a good job of that.
Dustin Jurman
-Original Message-
From: [EMAIL PROTECTED
, December 05, 2006 1:55 PM
To: WISPA General List
Subject: Re: [WISPA] Industry failings
Dustin Jurman wrote:
Being an ISP you understand build out costs, some put a lot more into a
site
than others. We'd probably do things a little differently, maybe not. Here
is what I do know.
WinStar's plan
If you don't need roaming capability treat each one as it's own network or
you could create one centralized distribution facility.
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Rogelio
Sent: Thursday, June 12, 2008 6:01 PM
To: WISPA General
Disclaimer like Marlon as we are a dealer of MRV and Lightpoint but these
are my unbiased reviews.
MRV has been a solid product for short shots. I haven't had the cleaning
and reaiming problem that some have claimed. It's really a matter of using
the right mounts and learning how to aim these
A while back Jack Unger explained how to get your product and antenna
through FCC licensing (Certified System). If you are doing this and you
have UBNT radio's then I believe he said that the costs of certification
could be less because you would only have to do a mini certification. I
also
Processor speed is only part of the answer to the RISC, CISC battle and this
type of radio design. Things flow in a logical operation and waiting occurs
on the systems buses in the PC based design.
Processor
Cache
Memory bus
Memory
Systems bus
Ect..
Designs in the different buses or systems
their money back.
Dustin Jurman
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jory Privett
Sent: Wednesday, August 01, 2007 11:50 AM
To: WISPA General List
Subject: [WISPA] Fw: Update on T1 Mobile Wireless Service
HiHas anyone heard of these guys
Todd,
I know exactly how you feel. I can tell you that my
Orthogon Radio's do those impossible things. But give us an idea of
what you are up against. If anyone can do it Orthogon can but if your just
being silly then that is another story.
Dustin
From: [EMAIL PROTECTED]
Don't know about that but look at the sala's.
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Rohrbacher
Sent: Wednesday, August 17, 2005 6:34 PM
To: WISPA General List
Subject: Re: [WISPA] The climb safe thread
Am I correct in thinking
I agree, we run into this problem quite a bit.
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Marlon K. Schafer (509) 982-2181
Sent: Wednesday, August 24, 2005 11:41 AM
To: WISPA General List
Subject: Re: [WISPA] Comment Period Extended
I
Too bad WISPA can't offer a larger venue so more people
could attend vs. having at Bells facility :-)
DSJ
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rick
HarnishSent: Wednesday, September 14, 2005 2:39 PMTo:
'WISPA General List'; [EMAIL PROTECTED]; 'Bullit'Subject:
Moved
Actually, we could. My building has a press briefing room specifically for
this sort of thing.
-Matt
dustin jurman wrote:
Too bad WISPA can't offer a larger venue so more people could attend
vs. having at Bells facility :-) DSJ
I'm in Tampa and always looking for good guys.
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Dan Metcalf
Sent: Wednesday, September 28, 2005 11:41 AM
To: 'WISPA General List'
Subject: [WISPA] Installer looking for work in Florida
My Installation
Always interested
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Marlon K. Schafer (509) 982-2181
Sent: Wednesday, September 28, 2005 1:18 PM
To: wireless@wispa.org
Cc: isp-wireless@isp-wireless.com
Subject: [WISPA] FCC meeting
Hi All,
I'm
You kill me man!
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Marlon K. Schafer (509) 982-2181
Sent: Monday, October 24, 2005 6:31 PM
To: WISPA General List
Subject: Re: [WISPA] Secondary DNS
Heck, I'd do backup mx stuff with someone now. I
That was not right!
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mac Dearman
Sent: Tuesday, November 08, 2005 10:05 PM
To: WISPA General List
Subject: Re: [WISPA] Florida job is killing me
You wouldnt believe how hard we are really working
Means that the arp timeout for that device is set low.
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Marlon K. Schafer (509) 982-2181
Sent: Thursday, December 08, 2005 12:18 PM
To: wireless@wispa.org
Subject: [WISPA] Arp requests
Hi All,
I just
I would be interested in #1.
Dustin Jurman
President
Rapid Systems Corporation
1211 N. Westshore Blvd
Tampa, FL 33607
[EMAIL PROTECTED]
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark
KoskenmakiSent: Tuesday, December 13, 2005 3:58 PMTo:
WISPA General ListSubject
:51:44 -, Paul Hendry
[EMAIL PROTECTED] said:
Hey Dustin, could you elaborate on the navini sucks statement? We
where looking at deploying them so would be good to know why they are not
good.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of dustin
the
fact is a tough proposition, I don't believe single bill is so much of an
issue for you as trying to save a customer in the 4th quarter when your down
by a few Touchdowns.
Dustin Jurman
President
Rapid Systems Corporation
1211 N. Westshore Blvd
Tampa, FL 33607
[EMAIL PROTECTED]
-Original
Hey Brad, what are the heights of the base stations? Are they tower mounted
and what antenna's are they using?
Dustin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brad Larson
Sent: Tuesday, January 03, 2006 10:34 AM
To: 'WISPA General List'
Charles,
What kind of work did they do in the forbearance issues?
It's good to have some guns on our side into battles, In many trips to the
FCC I've heard the same thing, We -ISP's Wisp's etc,,, Don't show up
enough as the LEC's roam the halls of the FCC. Squeaky wheel gets the oil.
Next time someone goes up I'll have them take some pictures.
Dustin Jurman
President
Rapid Systems Corporation
1211 N. Westshore Blvd
Tampa, FL 33607
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Charles Wu
Sent: Tuesday, January 24
Moto300/Orthogons can do dual payload so you need both polarities to achieve
300 megs.
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Tom DeReggi
Sent: Friday, January 27, 2006 3:52 PM
To: WISPA General List
Subject: Re: [WISPA] Multiple Radios
of the radio.
As you turn the power up on the radio, the more distortion you get so you
can't achieve full modulation at full power where as you can run BPSK at
full power. So dish size and quality becomes more important than radio
power when you are gunning for full modulation.
Dustin Jurman
Moto/Orthogon
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Mario Pommier
Sent: Wednesday, February 08, 2006
11:14 AM
To: WISPA General List
Subject: Re: [WISPA] BPSK QAM16
DSSS interference
what brand?
dustin jurman wrote:
Thank you Charles, We use
this is break out the Anritsu spectrum
analyzer and spend some time documenting the site. Knowing the ambient
noise floor at the site is important before putting any additional equipment
up as it's likely to interfere with other equipment.
Dustin Jurman
-Original Message-
From: [EMAIL
If the spectrum analyzer is left in place for a period of time and setup
with peak hold you will quickly find that radio that is used at the end of
the day. It still speaks, handshakes and more.
Just setting up big shots and blowing people out is bad business for
everyone. If the customer wants
improperly, just because you have an analyzer doesn't mean you know
how to use it.
If it's helpful I will post some shots to a website if Cliff thinks that it
is helpful.
Dustin Jurman
Rapid Systems Corporation
1211 North Westshore Blvd
Tampa, FL 33607
813--232-4887
Building Better
Hey Matt,
It would be nice to see this in a word
document or Text based so one could add comments to your work.
DSJ
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Matt Liotta
Sent: Sunday, February 26, 2006
2:56 PM
To: WISPA
General List
Subject: [WISPA]
It didn't attach correctly.
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Matt Liotta
Sent: Sunday, February 26, 2006 6:47 PM
To: WISPA General List
Subject: Re: [WISPA] Basic Mesh Theory
The file is attached as RTF.
-Matt
Dustin Jurman wrote
Delta3 - is the EBITA?
DSJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of John Scrivner
Sent: Monday, March 06, 2006 12:47 PM
To: [EMAIL PROTECTED]; WISPA General List
Subject: Re: [WISPA] VoIP/PBX Gateway appliance
Primus tells me they are more than a
going to dig deeper into your pocket.
Sorry I missed you at the show, Im
on baby watch so when she saw wireless beer and gear she called foul and took
away my kitchen pass L.
Dustin Jurman
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Charles Wu
Sent: Saturday
: Dustin Jurman
To: 'WISPA General List'
Sent: Sunday, March 19, 2006 6:47 PM
Subject: RE: [WISPA] Licensed Backhaul options
Charles you make a good point, but
Im going to throw a but in here:
but the Orthogon / Canopy 300
radios will run also run at:
64 QAM .92 dual
here.
The advantages of this type of design include scaleability, performance and
reduced opex.
DSJ
Dustin Jurman C.E.O
Rapid Systems Corporation
1211 North Westshore BLVD suite 711
Tampa, Fl 33607
Building Better Infrastructure
On Oct 11, 2012, at 8:35 PM, Fred Goldstein
fgoldst
Peace Brother, your a classy dude and great technologist. Enjoy your new
passion.
DSJ
Dustin Jurman C.E.O
Rapid Systems Corporation
1211 North Westshore BLVD suite 711
Tampa, Fl 33607
Building Better Infrastructure
On Feb 1, 2013, at 5:28 PM, Dylan Bouterse dy...@corp.power1.com wrote
59 matches
Mail list logo