Re: [WISPA] Tranzeo/Mtik disconnect issue...

2008-10-01 Thread Eje Gustafsson
Odd behavior. This must be a mismatch in the protocol between the Tranzeo units and MikroTik. We have tested many different units (E-zy.net, Senao/Engenius, MikroTik, Ubiquiti as well Teletronics) and never seen this behavior you describe. However I do recall way back someone had very strange

Re: [WISPA] any got this Tranzeo antenna in stock?

2008-10-11 Thread Eje Gustafsson
From the look of it it's not. The Tranzeo has a plastic radome from the look of the picture while the Laird (Pacific Wireless) one is a metal unit. So the Tranzeo is probably a printed pcb while the Laird one is a metal waveguide. http://store.wisp-router.com/itemdesc.asp?ic=SAH24-12-Geq=Tp= /

Re: [WISPA] informing customers of internal issues

2008-11-05 Thread Eje Gustafsson
If you allow established communications but not new communications before your blocks then your users will never know that you are blocking all new communications from those IP spaces because when they request communication to one of those IPs they will get the responds back. / Eje CTO

Re: [WISPA] IBM backs BPL

2008-11-13 Thread Eje Gustafsson
Canopy has a BPL just for that. http://www.motorola.com/Business/US-EN/Business+Product+and+Services/Wireles s+Broadband+Networks/Broadband+over+Powerline / Eje CTO WISP-Router, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess -

Re: [WISPA] NetFlix Streaming Bandwidth Information

2008-11-23 Thread Eje Gustafsson
No not Kbps but rather KBps so multiply it all with 8 to get Kbit. From my own checks I see peaks of well over 2.5Mbit with Netflix on highest quality. As much as 3-3.5Mbit as a matter over a 5Min average. / Eje -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On

Re: [WISPA] NetFlix Streaming Bandwidth Information

2008-11-23 Thread Eje Gustafsson
Lowest quality is so bad IMO that you do not want to watch it on full screen but watch it on a youtube size picture frame and you will have a movie that is in pare to little better then youtube. Highest quality looks like DVD quality and is quite enjoyable. Second to best is alright. The second to

Re: [WISPA] tower erection question

2008-12-15 Thread Eje Gustafsson
Yeah that is right. I slept since then. Only one that I could think of was Rick that had done one but yes Jeremy did one to I think it was at an earlier WISPCon then Rick. I think Rick did his on WISPCon III. / Eje -Original Message- From: wireless-boun...@wispa.org

[WISPA] U.S. Adults Choosing Internet Over Sex

2008-12-15 Thread Eje Gustafsson
http://www.informationweek.com/news/internet/reporting/showArticle.jhtml?art icleID=212500440subSection=News Thought this article was pretty funny reading... So wanted to share it.. / Eje WISPA Wants You!

Re: [WISPA] eratic ethernet connection

2008-12-20 Thread Eje Gustafsson
Should only need to be set if the run is over 328' or 100m ie longer then Ethernet is supporting. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Reed Sent: Saturday, December 20, 2008 10:20 AM To: WISPA General List Subject: Re:

Re: [WISPA] ptmp gear

2009-01-01 Thread Eje Gustafsson
http://store.wisp-router.com/itemdesc.asp?ic=RBCRDeq=Tp= MikroTik's LiteStation model. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of John Scrivner Sent: Thursday, January 01, 2009 9:31 PM To: WISPA General List Subject: Re:

Re: [WISPA] equipment state property taxes

2009-01-04 Thread Eje Gustafsson
In Europe they have done mileage based taxes on diesel vehicles for as far as I can recall. They no longer do it on biodiesel since there are many new cars that are biodiesel over there now. Most countries have rewritten their taxation laws with the introduction of biodiesel fuel. In Europe diesel

Re: [WISPA] Gotta Have

2009-10-19 Thread Eje Gustafsson
Time to start using the drycleaner ;) I always get one or more nice new multi-tool when I pick the drycleaning ;) / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Monday, October 19, 2009 11:44 AM To: 'WISPA

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread Eje Gustafsson
It's the feed that determine the frequency. If there is no markings on it the only reasonable way is to use something like a Bird Site Analyzer to figure out your VSWR on the feed and see where the VSWR and return loss is the best. The dish itself only focus the energy in one particular spot then

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread Eje Gustafsson
Diameter is irrelevant and will not tell you frequency. The feed is determine the frequency. If these are Pacific Wireless dishes then they are 5GHz assuming these are solid dishes since Pac never produced a 2.4GHz feedhorn for their solid dishes at least during the 6+ years we been one of their

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread Eje Gustafsson
Only reason why the feed arm is longer on a higher gain dish or grid is because the grid or dish is larger and the focal point is further away from the dish so the arm has to be longer but that is independent of frequency because the focal point will always be at the same place on the same dish no

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread Eje Gustafsson
The feeds used on the Pac/Laird 2 dishes is 8.5 long from flange to the bottom of the feed. The new wide band feeds are a flat looking disk 5.75 in diameter. http://store.wisp-router.com/customkititems.asp?kc=DA5W%2D29eq=# Shows a picture of the old narrow band feed it's about 2 in diameter.

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread Eje Gustafsson
They are not. Without markings or other things to reference by all you can do is measure current focal length and find a feed that matches that focal length or adjust the new feed to the same focal length because the parabolic curve determines where the focus point is on the dish/grid and

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread Eje Gustafsson
Actually they did produce some 2.4GHz feeds but as far as I know they decided not to market them but Pac sourced their solid dishes from China and I know others that sold the same dish but the feeds many times where different and they brought out their own feed for the dish. So it might be same

Re: [WISPA] Court says cities have the right to bar telecommunicationstowers

2009-10-26 Thread Eje Gustafsson
You can find a lot of fake palm trees in Las Vegas for similar reasons that if they didn't hide the towers then they couldn't put up any more. Drive north towards Nellis airforce base on I-15 on the left side along the rail road tracks one of the palms is not a real palm. There are plenty others

Re: [WISPA] powering finicky mikrotiks on 24v solar

2009-10-28 Thread Eje Gustafsson
That would mean increased cost on the units. People is more interested in price and MT products not capable of 48VDC and the sale of them caused such a dip in the 48V MT products that the 48VDC product line became too expensive to produce due to lack of quantity so choice was either increase price

Re: [WISPA] NAT issue with Hotmail/Yahoo/Google

2009-10-28 Thread Eje Gustafsson
NAT is unfortunately not very scalable but also never told is the amount of subs that are being natted and through how many ips. NAT _IS_ an issue. But comes down to business model. Do you spend the time for tech support and issues handling this on an ongoing basis or do you spend the money and

Re: [WISPA] Will a MT Crossroads do WDS Station with a UBNT Powerstation2 (also in WDS station)?

2009-10-31 Thread Eje Gustafsson
Yes MT have no problem doing WDS with any of the Ubnt products. One need to be master two wds stations can not talk one need to be master the other slave/station. But otherwise yes no problems. http://store.wisp-router.com/itemdesc.asp?ic=MikroPilot-crdeq=Tp= Complete unit. 16dBi panel, poe

Re: [WISPA] Hotspot Client

2009-11-05 Thread Eje Gustafsson
The correct list price is $74 for the ECB-3220 set by EnGenius. http://store.wisp-router.com/itemdesc.asp?ic=ECB-3220eq=Tp= / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, November 05, 2009 12:27 PM

[WISPA] HP to buy 3Com for 3.1bln

2009-11-11 Thread Eje Gustafsson
http://www.reuters.com/article/CMPTRS/idUSN1138008420091112 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA

Re: [WISPA] HP to buy 3Com for 3.1bln

2009-11-11 Thread Eje Gustafsson
, November 11, 2009 10:38 PM To: WISPA General List Subject: Re: [WISPA] HP to buy 3Com for 3.1bln This was brought up in an IRC channel earlier today no one could answer this question: What does 3com have that prospective buyers want? On 11/11/09, Eje Gustafsson e...@wisp-router.com wrote: http

Re: [WISPA] Small Managed Switches

2009-11-11 Thread Eje Gustafsson
Don't know about doing it with vlans but the RB450G's (the gigaethernet model) and Rb493AH (high cpu powered unit) can easily handle 50+mbps without breaking much of a sweet. Have a RB450G that is pushing an average of 6Mbps and cpu load don't go over 5% but this unit don't have any vlans active

Re: [WISPA] NanoStation External Antenna

2009-11-18 Thread Eje Gustafsson
Or change the clients channel first before you change the AP... Also in WDS slave mode the client will automatically follow the AP / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Data Technology Sent: Wednesday, November 18,

Re: [WISPA] Report: Broadband stimulus funds won't suffice

2009-12-13 Thread Eje Gustafsson
And whom is providing the government with the monies to do this? The tax payers and isn't a tax payer allowed to comment/argue what the monies are being used for? Can just look at for example Kansas where the government done a poor job in managing the monies. 8 years ago toll free numbers was

Re: [WISPA] Ubiquiti Nanostation NSM5

2009-12-16 Thread Eje Gustafsson
Last weeks shipment is all gone of the NSM5's but another container is following closely behind hopefully should have it in next week. / Eje WISP-Router, Inc. Follow us on twitter.com/wisprouter -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On

Re: [WISPA] Report: Broadband stimulus funds won't suffice

2009-12-16 Thread Eje Gustafsson
Don't forget the towel.. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of MDK Sent: Wednesday, December 16, 2009 1:01 PM To: WISPA General List Subject: Re: [WISPA] Report: Broadband stimulus funds won't suffice The universal answer to

Re: [WISPA] Ubiquiti Nanostation NSM5

2009-12-16 Thread Eje Gustafsson
- From: Eje Gustafsson e...@wisp-router.com To: 'WISPA General List' wireless@wispa.org Sent: Wednesday, December 16, 2009 7:27 PM Subject: Re: [WISPA] Ubiquiti Nanostation NSM5 Last weeks shipment is all gone of the NSM5's but another container is following closely behind hopefully should

Re: [WISPA] I'm an idiot

2009-12-17 Thread Eje Gustafsson
Talk about hand warmers. I saw at the dollar tree they had hand warmers (reusable). I had those reusable before ad they are GREAT. There is a small metal button inside you pop and it starts to get warm. After a while they start to cool down ad start to get hard. To make it usable again just boil

Re: [WISPA] UBNT M5 series nanostation

2009-12-18 Thread Eje Gustafsson
Yes a NSM5 can talk with a MikroTik 11n unit. Currently they have some issues with the M5's talking with Legacy (802.11a) equipment a new firmware should be forth coming shortly. The latest solved a lot of the problems but not completely. / Eje -Original Message- From:

[WISPA] FUD spreading again - WAS RE: Wimax gear

2009-12-30 Thread Eje Gustafsson
Sigh.. Ignorance is bliss I guess. But never mind. Since you never investigated nor understand the rules I'm not going to let you know that there are plenty of MikroTik units out there that passed FCC cert lab testing and have FCC approval and modular systems that passed FCC enforcement

Re: [WISPA] Burnt CPE from House Fire

2010-01-07 Thread Eje Gustafsson
Only if you get caught? ;) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jayson Baker Sent: Thursday, January 07, 2010 8:02 AM To: WISPA General List Subject: Re: [WISPA] Burnt CPE from House Fire Isn't that fraud? On Wed, Jan 6,

Re: [WISPA] MT Mikropoynt

2010-01-08 Thread Eje Gustafsson
Ryobi one plus have a battery tester that would be simple to modify for this very thing. I think they are less than $15 at HD. It's a cool idea now why didn't I think of that I love my Ryobi One+ tools ;) I better run and file the patent before Josh does for this cool new Ryobi One+ accessory as

Re: [WISPA] MT Mikropoynt

2010-01-08 Thread Eje Gustafsson
at 5:25 PM, Eje Gustafsson e...@wisp-router.com wrote: Ryobi one plus have a battery tester that would be simple to modify for this very thing. I think they are less than $15 at HD. It's a cool idea now why didn't I think of that I love my Ryobi One+ tools ;) I better run and file the patent

Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor withUBNT radios or Mikrotik?

2010-01-12 Thread Eje Gustafsson
We among many others carry this one. http://store.wisp-router.com/itemdesc.asp?ic=SP-POE-MJ8eq=Tp= Since this is an indoor model and should be placed as close as possible to the poe powered device to provide maximum protection to the unit for any power surge induced over you cat5 run I have

[WISPA] Skype To FCC Request Net Neutrality

2010-01-15 Thread Eje Gustafsson
http://gigaom.com/2010/01/14/skype-to-fcc-keep-internet-open-neutral/ If this already been posted my apologies but can't recall seeing anything about this today. / Eje WISPA Wants You! Join today!

Re: [WISPA] Public IP behind Transparent Bridge

2010-01-20 Thread Eje Gustafsson
Yes you can do route the publics over a internal private ip network but of course you do not want/need to nat. Drawback (advantage) is that people on the outside can not traceroute through your internal network because you use private ips but that don't prohibit them from reaching the public ips

Re: [WISPA] what should ARPU mean?

2009-01-06 Thread Eje Gustafsson
I would say these discussions are kind of meaning less because these definitions are different from one accountant to another. But if the question is rephrased how to does you guys define your COGS. Because even if people are WISPs there are so many different approaches to being a WISP on these

Re: [WISPA] what should ARPU mean?

2009-01-06 Thread Eje Gustafsson
Actually some type of labor can fall into cogs. If we talk about internet service cogs for an install the labor cost to install this client should be included. But labor for sales, marketing and support of this customer shouldn't. http://en.wikipedia.org/wiki/Cost_of_goods_sold COGS is the

Re: [WISPA] Point to point links, NLOS

2009-02-05 Thread Eje Gustafsson
Yes sometimes you can be surprised what you can get. I have a superrootenna as we joke about it installed. It's a 14dB semi line of sight When we installed it we wanted to see if we could maybe get a little stronger signal and swapped it for a 19dB roo and lo and behold got worse signal. We

Re: [WISPA] What does this mean to wisps?

2009-02-14 Thread Eje Gustafsson
Always hated that about the bankruptcy system. How a company can do so many stupid things then file chapter 11, get restructured and basically continue operations with all their equipment all in place but with no debt. If I wanted a fancy house, car and all cool gadget and got it on the expense

Re: [WISPA] Cat5 ferrite beads

2009-02-17 Thread Eje Gustafsson
http://www.mouser.com/Search/Refine.aspx?N=2105407 / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Larry A Weidig Sent: Tuesday, February 17, 2009 2:30 PM To: WISPA General List Subject: [WISPA] Cat5 ferrite beads Can

Re: [WISPA] Another online backup thread

2009-02-17 Thread Eje Gustafsson
Rsync =) works great got windows version available. Depending what your looking at doing. Just have the clients backup their documents or do complete machine backup for later restore (if the later then rsync is not it). / Eje -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] Another online backup thread

2009-02-17 Thread Eje Gustafsson
True to this. Just look at Circuit City. Second largest electronics retailer in the US. Gone.. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, February 17, 2009 2:55 PM To: WISPA General List Subject:

Re: [WISPA] Another online backup thread

2009-02-17 Thread Eje Gustafsson
special ($200 off normal price), and I did a quick lookup and found the exact same laptop, brand new, online for $200 less than that price. So they had a $400 markup on an $899 laptop? Seems a little excessive to me. Travis Microserv Eje Gustafsson wrote: True to this. Just look at Circuit

Re: [WISPA] first whitespaces 802.11 card?

2009-02-26 Thread Eje Gustafsson
Those cards are for metering applications and they are a build to order product with a 1k pieces MOQ. So to dispel any myths or issues they are NOT TV Whitespace radios and not widely available. / Eje CTO WISP-Router, Inc. -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] Best Practice: Sealing Coax ConnectorsWAS:HyperlinkCoax Jumpers

2009-03-05 Thread Eje Gustafsson
http://store.wisp-router.com/itemdesc.asp?ic=Wtrproofkiteq=Tp= Butyl tape might be nasty but applied right it creates a great weather seal. My recommendations is to put electrical tape down on the connector and cable before putting the butyl down then wrap the butyl first loosely with electrical

Re: [WISPA] 900 Downtilt at 300'

2009-03-09 Thread Eje Gustafsson
Generally not on a 900Mhz with wide beam. But height get more important when dealing with say a 11dB omni. On the Tiltek (believe it's a 19deg H-plane beam) I would probably consider 1-2 degree downtilt would get the sweet spot at at either 1.6miles or 3.3 miles out and the inner -3dB at a

Re: [WISPA] NS3/MikroTik

2009-03-11 Thread Eje Gustafsson
Consider it only has 8MB and the MT install image is 10M I don't think there is even enough space on the PicoStation and from the looks of it the disk usage on a RB411 is about 25-30Mbyte. 16MB ram is enough for most easier applications but you would need 32MB storage I would say and that

[WISPA] Time Warner Tests $150-Per-Month Unlimited Internet

2009-04-10 Thread Eje Gustafsson
Not seen anyone post this article but think it is of interest to people on the list. http://www.informationweek.com/news/services/data/showArticle.jhtml?articleI D=216500302 http://www.informationweek.com/news/services/data/showArticle.jhtml?article ID=216500302subSection=News subSection=News

[WISPA] twitter

2009-04-15 Thread Eje Gustafsson
I know this was talk about a while back (twitter.com). I know some of you guys are on there.. I would assume some of you guys have seen the race for 1 million followers http://news.cnet.com/8301-1023_3-10220629-93.html I think personally it would be very fun to see aplusk a regular

Re: [WISPA] Proxim WORP Protocol

2009-04-16 Thread Eje Gustafsson
It's proxims own development of Karlnet. When Proxim and Karlnet had a falling out Proxim built their own version of Karlnet which they called WORP. It's based on a/b/g like Karlnet and for example MikroTik's Nstrem. Just they do not follow the standard a/b/g protocol when the information is

Re: [WISPA] is this router overloaded?

2009-04-20 Thread Eje Gustafsson
And 5.2 is not allowed for outdoor usage. So Franks unit is an indoor unit I would suspect he is suffering from multipath reflections. Besides on the radar stuff.. The way DFS is designed in MT it will never be able to get certified. First of it must continuously look for and detect radar not

Re: [WISPA] DFS Radar Question

2009-04-20 Thread Eje Gustafsson
this but they interface is slow and clunky and don't log any data. / Eje Gustafsson WISP-Router, Inc. http://store.wisp-router.com/items.asp?Cc=WiFiToolsBc= -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Adam Goodman Sent: Monday, April 20, 2009 3:51

Re: [WISPA] is this router overloaded?

2009-04-21 Thread Eje Gustafsson
be expanded to be certifiable. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Eje Gustafsson e...@wisp-router.com To: 'WISPA General List' wireless@wispa.org Sent: Monday, April 20, 2009 4:39 PM Subject: Re: [WISPA] is this router overloaded

Re: [WISPA] using multiple 5.3 cards in a Mikrotik

2009-04-21 Thread Eje Gustafsson
Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Eje Gustafsson e...@wisp-router.com To: 'WISPA General List' wireless@wispa.org Sent: Monday, April 20, 2009 4:39 PM Subject: Re: [WISPA] is this router overloaded? And 5.2 is not allowed for outdoor usage. So

Re: [WISPA] Noise by me on a tower

2009-04-29 Thread Eje Gustafsson
Ethernet crystal harmonics. The crystal on Ethernet is 25MHz. So your hitting them with the 9th harmonics. This bleeding is worst with PoE powered devices because it couples into the DC power over the cat5 cabling and if the power supply is not nice and clean it will couple into the AC system as

Re: [WISPA] RB333/433 eliminating self-interference test

2009-04-29 Thread Eje Gustafsson
On the remote sites it's so true.. I have one site that got a horizontal omni that is picking up signal at -89 from a WISP who's closest tower is over 35miles away. Also at one point had one horizontal omni at a 70ft tower site connected to another horizontal omni at a 120ft tower site about 8

Re: [WISPA] Speaking of ferrite..

2009-05-04 Thread Eje Gustafsson
A month or so ago I sent out a link to item on Mousers website. You could get it from Digi-Key as well but I like mouser better and their website is easier to work with as well. Just go to mouser.com and do a quick search for ferrite bead or ferrule. / Eje -Original Message- From:

Re: [WISPA] Mikrotik FCC

2009-05-11 Thread Eje Gustafsson
Cross roads are certified with the entire Pacific Wireless line of antennas. R52 is certified with most of those as well (if not all). You can also use XR2/5 cards in RB SBC's. There are other solutions as well. We offer some certified pre built solutions more to come. / Eje Gustafsson CTO

Re: [WISPA] Mikrotik FCC

2009-05-11 Thread Eje Gustafsson
you explain what you mean by certified then? What does that entail other than just putting together a board, antenna and radio that are fcc certified? Do you have the entire unit tested and certified, or do yo see that as not necessary? Randy Eje Gustafsson wrote: Cross roads

Re: [WISPA] Mikrotik FCC

2009-05-11 Thread Eje Gustafsson
in the US would daily violate the FCC regulations. A SBC board after all is a miniature all in on motherboard. / Eje Gustafsson CTO WISP-Router, Inc. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Tom DeReggi Sent: Monday, May 11, 2009

Re: [WISPA] Mikrotik FCC

2009-05-12 Thread Eje Gustafsson
...@r337.com Sent: Tuesday, May 12, 2009 1:52 PM To: sc...@brevardwireless.com sc...@brevardwireless.com, WISPA General List wireless@wispa.org Subject: Re: [WISPA] Mikrotik FCC On May 12, 2009, at 1:25 PM, Scott Carullo wrote: Eje Gustafsson says this is not the case or elsewhen I buy

Re: [WISPA] WISPA Website Updates

2009-05-20 Thread Eje Gustafsson
Great work guys. The website looks great. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Rick Harnish Sent: Wednesday, May 20, 2009 8:47 AM To: memb...@wispa.org; 'Motorola Canopy User Group'; 'WISPA General List' Subject:

Re: [WISPA] Tranzeo/Pac Wireles Horizontal Omni 13db

2009-06-12 Thread Eje Gustafsson
We have them in stock. http://store.wisp-router.com/itemdesc.asp?ic=ODH24-13eq=Tp= / Eje CTO WISP-Router, Inc. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Michael Baird Sent: Friday, June 12, 2009 12:49 PM To: WISPA General List

Re: [WISPA] Tranzeo/Pac Wireles Horizontal Omni 13db

2009-06-12 Thread Eje Gustafsson
lived based on web orders and/or phone orders? On 6/12/09, Eje Gustafsson e...@wisp-router.com wrote: We have them in stock. http://store.wisp-router.com/itemdesc.asp?ic=ODH24-13eq=Tp= / Eje CTO WISP-Router, Inc. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless

Re: [WISPA] Tranzeo/Pac Wireles Horizontal Omni 13db

2009-06-12 Thread Eje Gustafsson
get some NS2s =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 When you have eliminated the impossible, that which remains, however improbable, must be the truth. --- Sir Arthur Conan Doyle On Fri, Jun 12, 2009 at 3:22 PM, Eje Gustafsson e...@wisp

Re: [WISPA] Antenna Performance

2009-06-28 Thread Eje Gustafsson
First thing that comes to my mind reading your post is that you installed a higher gain antenna which means your vertical beam is going to be narrower (sometimes higher gain is not always better). Being that you installed the antenna with the same down tilt angle your missing the mark because you

Re: [WISPA] email black lists

2009-06-30 Thread Eje Gustafsson
Any ISP running their own DNS and mail server needs to be subscribed to dnsstuff.com. Many many great DNS tools not only to test your DNS server entries on your own server but also to check how servers see lookups against your machine, to do spam db look ups and many other neat tools. Another

Re: [WISPA] ethernet surge protection

2009-07-07 Thread Eje Gustafsson
Uhm the ZS series is not designed for PoE application and has a clamp normally of 12v. You need the MJ8 series with the appropriate clamp level. The MJ8 series is designed for PoE applications. 48V version http://store.wisp-router.com/itemdesc.asp?ic=SP-POE-MJ8eq=Tp= 24V version

Re: [WISPA] TP--UPS-DC-12-9

2009-08-01 Thread Eje Gustafsson
If battery is removed, the power to the radio shuts off. The controller is powered by the battery. There isn't at this time have a way to monitor the battery voltage. They're (Tycon Power) working on it but no telling when they might come up with a solution. I seen some pretty cool devices at

Re: [WISPA] TP--UPS-DC-12-9

2009-08-01 Thread Eje Gustafsson
On Sat, Aug 1, 2009 at 1:32 PM, Eje Gustafsson e...@wisp-router.com wrote: If battery is removed, the power to the radio shuts off. The controller is powered by the battery. There isn't at this time have a way to monitor the battery voltage. They're (Tycon Power) working on it but no telling when

Re: [WISPA] TP--UPS-DC-12-9

2009-08-01 Thread Eje Gustafsson
wire it right into the Ethernet port of your RB, creating a loopback There's no need for switches, routers, Bullets, or any other piece of equipment. On Sat, Aug 1, 2009 at 2:23 PM, Eje Gustafsson e...@wisp-router.com wrote: Guess that would work to. Have a cheapo 5 port switch plugged

Re: [WISPA] TP--UPS-DC-12-9

2009-08-01 Thread Eje Gustafsson
:38 PM To: WISPA General List Subject: Re: [WISPA] TP--UPS-DC-12-9 Yes, you can look if it's up/down. Or, put an IP on it, and ping the IP. On Sat, Aug 1, 2009 at 2:34 PM, Eje Gustafsson e...@wisp-router.com wrote: Must say that is a pretty cleaver idea. Well worth investigating and testing

Re: [WISPA] Defective Microtik

2009-08-03 Thread Eje Gustafsson
It's a alu shield on it solder it to the connector or strip of some of the plastic and put a nice clamp with a ground wire to electrical ground. On one tower install that is what we did used coax 400 size ground kits. Shielded connectors as well. Not lost a single Ethernet port there for h 5

Re: [WISPA] Direct Lightning Strikes

2009-08-06 Thread Eje Gustafsson
Sounds like your ground potential between tower ground and electrical ground might is not optimal. Make sure that the tower ground is also correctly and properly grounded to the electrical ground. Seems your electronic might be shunt between the two grounds so each time tower get a hit your

Re: [WISPA] Badly need 2 Bullet5M's

2009-08-08 Thread Eje Gustafsson
We have 200 each on the way to us. Was supposed to been picked up by our freight forwarder in Taiwan this week so hopefully we should have them early next week. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Carullo Sent:

Re: [WISPA] Mikrotik Redirect

2009-08-11 Thread Eje Gustafsson
Yepp bit expected. Because a web page consists of multiple images most of the time and if you use every nth you never know if that rule will then hit a icon, text page or picture file that is retrieved. You could setup something that uses the hotspot service and the advertisement banners. Or I

Re: [WISPA] Badly need 2 Bullet5M's

2009-08-12 Thread Eje Gustafsson
If you didn't find them and still need they are now in stock. / Eje WISP-Router, Inc. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of os10ru...@gmail.com Sent: Saturday, August 08, 2009 10:50 AM To: WISPA General List Subject: Re:

Re: [WISPA] Content Filter Suggestion for School

2009-08-13 Thread Eje Gustafsson
Got to love it another product with no price on the website.. Looks cool though but I hate having to deal with push sales people just to find a price and then have them call and spam me day in and day out for years to come. So do you know what the product costs? / Eje -Original

Re: [WISPA] Client Internet Filtering Upgrade - WAS: Content Filter Suggestion for School

2009-08-14 Thread Eje Gustafsson
I would think OpenDNS could serve different info based on source address. I never used OpenDNS but understand it's pretty powerful and flexible. With BIND which I used for many many years you can setup different service rules based on source address. This way you can for example prevent pollution

Re: [WISPA] FCC Launches Formal Probe of Wireless Industry

2009-08-21 Thread Eje Gustafsson
Ran across this article.. Thought it was a bit humorous.. http://www.eweek.com/c/a/Government-IT/What-Is-Broadband-FCC-Doesnt-Know-241 331/ This should be something where I think WISPA should try to influence and educate about fixed wireless. / Eje -Original Message- From:

Re: [WISPA] Handheld GPS recommendations, anyone?

2009-08-21 Thread Eje Gustafsson
The initial requestor wouldn't be able to use a data logger. He needed to know the coordinates now but all he needed really to know is coordinates and height so a simple GPS that display just that would suffice. My suggestion would be the Beacon GPS Tracking unit as an example that can be had

Re: [WISPA] Apartment Buildings

2009-08-21 Thread Eje Gustafsson
Not seen a single solution that can do that. That is the functionality of NAT to hide what is behind it. I take advantage of it all the time when I'm staying in hotels. Use my own AP that allows my wifi enabled devices access and connect to the hotels system and I'm paying a single fee for the

Re: [WISPA] Apartment Buildings

2009-08-21 Thread Eje Gustafsson
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of richard sterne Sent: Friday, August 21, 2009 2:33 PM To: WISPA General List Subject: Re: [WISPA] Apartment Buildings Could you not set the CPE to DHCP and the IP pool to allow only 1 IP address? Richard 2009/8/21 Eje

Re: [WISPA] Gettin sick of Microtik

2009-08-24 Thread Eje Gustafsson
This is true with a lot of the RouterBoards that you do not have enough onboard power source capability to run generally more than two high powered cards. For example the 400's can only handle about 10watt of external cards that means the third XR card will kill the system. One thing to keep in

Re: [WISPA] Changing cards in Mikrotik - now Safety First

2009-08-25 Thread Eje Gustafsson
Never climb alone. Even if you do 100% tie off. A slip and fall and you could hit your head and be hanging upside down. If you use right equipment you are not going to slip out of your harness BUT Hanging upside down for any longer period of time is fatal. Always have someone on the ground

Re: [WISPA] Engenius EAP-3660

2009-08-25 Thread Eje Gustafsson
The EAP-3660 is not EOL'd at least they have not let us know and we generally are the first one to know as soon as they make their decision. I played and used the EAP-3660 and it's a pretty nifty cool product. Only run it for a few months so far so good no issues what so ever. The firmware can

Re: [WISPA] Antenna Mount extensions

2009-08-27 Thread Eje Gustafsson
Careful with those. You tighten up to hard or you attach to an old chimney and you might find yourself with a big mason bill and maybe even a carpenter bill as well. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ralph Sent:

[WISPA] MUM passes

2009-09-01 Thread Eje Gustafsson
and ask for a pass (877-947-7787). If you already registered then sorry you cannot drop your registration and use a free pass to reregister. / Eje Gustafsson CTO WISP-Router, Inc. WISPA Wants You! Join today

Re: [WISPA] Vendors eating their dogfood (was Re: Which WiMAX Are You?)

2009-09-11 Thread Eje Gustafsson
We are a distributor/reseller we started out as a ISP turned WISP and still run our networks. We deploy what we sell and our techs have firsthand knowledge with the equipment and work closely with the manufacturers we represent to improve the products to work the best way. / Eje -Original

Re: [WISPA] backhaul choices

2009-09-16 Thread Eje Gustafsson
The new RB411R do have a onboard wireless interface. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mike Hammett Sent: Wednesday, September 16, 2009 12:27 PM To: WISPA General List Subject: Re: [WISPA] backhaul choices An

Re: [WISPA] backhaul choices

2009-09-16 Thread Eje Gustafsson
The Routerboards without built in radio cards are Part B certified devices (which is a self certification process with no filing with the FCC required). The manufacturer just need to have the documentation to provide in case of a FCC inquiry. If memory serves me right MikroTik used to have their

Re: [WISPA] backhaul choices

2009-09-16 Thread Eje Gustafsson
And the part 15 type B certification is a self certification process with no filing needed with the FCC and there for no FCC id number provided. Majority of the testing is line noise testing ie what possible signals the device might be outputting into the electrical grid. That is where the most

Re: [WISPA] backhaul choices

2009-09-16 Thread Eje Gustafsson
You found the RB411R unit which do have a onboard radio. The regular RB411 does not have a built on radio. The RB411R needs to be certified under part 15 as a transceiver and has been certified. The normal RB411 does not have a transceiver on them and been self tested as a Class B device and there

Re: [WISPA] backhaul choices

2009-09-16 Thread Eje Gustafsson
Time to stop this thread since your just spreading FUD.. Read my other posts. All MikroTik products do have the appropriate FCC certification and/or testing done on them. / Eje -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of ralph

[WISPA] Firmware needed...

2009-09-22 Thread Eje Gustafsson
Could someone please send me Motorola Canopy v7.3.6 DES firmware? I got a site down only thing I got around is a older P9 non-advantage AP but it is running 7.2.9 so can not set in the web interface to hardware scheduling so I can upgrade to v8- since it requires 7.3.6. / Eje

  1   2   >