Re: [WISPA] any got this Tranzeo antenna in stock?

2008-10-11 Thread Jenco Wireless
I have 4 slightly used 120-16's and one or two brand new ones. They are a lot bigger in size but they do work great. I had to go to smaller antennas for contractural reasons. Hit me off-list if interested - [EMAIL PROTECTED] Thanks, Brad H On Sat, Oct 11, 2008 at 10:42 PM, Eje Gustafsson

Re: [WISPA] Weather proofing antennas

2008-12-13 Thread Jenco Wireless
This stuff really does work: http://www.wx2100.com/ Brad H On Thu, Dec 11, 2008 at 9:11 PM, Josh Luthman j...@imaginenetworksllc.comwrote: I agree with Tom - from this point on I have been doing installs like that. Grids are not my thing but ARC and backfires are awesome! On 12/11/08,

Re: [WISPA] Google Map... How to Add Your Wireless Internet AP

2006-04-19 Thread Jenco Wireless
I accidentally added one where I don't have one. How can I delete it? Thanks, Brad Hagstrom On 4/19/06, Robert Kim Wireless Internet Advisor [EMAIL PROTECTED] wrote: Gentlemen, Adding a point is a bit confusing if you've not used aninterface like this before... The trick is to...1. ZOOM INTO

Re: [WISPA] Zcomax has WIMAX?

2006-06-12 Thread Jenco Wireless
Why is the 3.5 Wi-Max license free band not approved in the U.S. ??? -- Brad H On 6/12/06, George Rogato [EMAIL PROTECTED] wrote: http://www.zcom.com.tw/news001.htm--George Rogato Welcome to WISPAwww.wispa.orghttp://signup.wispa.org/--WISPA Wireless List: wireless@wispa.org

Re: [WISPA] 900 Mhz bandpass filters

2006-06-15 Thread Jenco Wireless
http://www.dci.ca/ They custom tune them for you. Expensive, but probably the best on the market. Very low line loss. -- Brad H (Jenco Wireless) On 6/15/06, Mario Pommier [EMAIL PROTECTED] wrote: Anyone know of a source for 900 Mhz bandpass filters to selectivelyfilter out other transmitters

Re: [WISPA] RouterBoard 532s

2006-08-10 Thread Jenco Wireless
I am waiting on this also (the noise issue from the power supply is what I am assuming you are talking about). I have had various issues with a couple of old 532's I got when they first came out (Ethernet connectivity to a Tranzeo unit on a 250' run). I have had good luck with the 100 series, but

Re: [WISPA] lightning

2006-10-07 Thread Jenco Wireless
I lost 15% of my CPE's one year. It was a dry Summer (I theorize the earth was not conducting well), then we had a couple of bad storms. Using a $1.50 inductor on the Ethernet cable near the radios really seems to have helped a lot. Brad Hagstrom On 10/7/06, Jason Hensley [EMAIL PROTECTED]

Re: [WISPA] lightning

2006-10-07 Thread Jenco Wireless
. Brad Hagstrom (Jenco Wireless) On 10/7/06, KyWiFi LLC [EMAIL PROTECTED] wrote: Can you share some info on the $1.50 inductor you reference below?Do you then ground the inductor to the mounting arm which is then grounded to an earth ground? Please share if you don't mind, inquiringminds would LOVE

Re: [WISPA] lightning

2006-10-07 Thread Jenco Wireless
Contrary to popular belief, lightning likes to follow the path of least inductance. Inductance is the resistance to a change in current flow. All I can say is that they have worked for me. On 10/7/06, Dylan Oliver [EMAIL PROTECTED] wrote: On 10/7/06, Jenco Wireless [EMAIL PROTECTED] wrote

Re: [WISPA] lightning

2006-10-08 Thread Jenco Wireless
, *Jenco Wireless* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: http://pdfcatalog.digikey.com/T063/1150.pdf#search=%22digikey%20240-2318-nd%22 http://pdfcatalog.digikey.com/T063/1150.pdf#search=%22digikey%20240-2318-nd%22 I use the 240-2318-ND (towards the bottom of the page).Just wrap

Re: [WISPA] lightning

2006-10-16 Thread Jenco Wireless
as possible. You have to purchase 100 to get that low, low price I mentioned :-). We are located in Ohio. Brad Hagstrom (Jenco Wireless) On 10/7/06, KyWiFi LLC [EMAIL PROTECTED] wrote: Can you share some info on the $1.50 inductor you reference below?Do you then ground the inductor

Re: [WISPA] lightning

2006-10-17 Thread Jenco Wireless
DigiKey lists a standard inductance for each core and the frequencies they filter. Its been awhile since I researched them, but my primary focus was the FM interference and my secondary was just to get as much inductance as possible for lightning suppression. - the more times you loop the cable

Re: [WISPA] lightning

2006-10-17 Thread Jenco Wireless
It's the simple method - but it works ! Brad H On 10/17/06, rwf [EMAIL PROTECTED] wrote: Yep- We look at Hamfests for any inductor with a big hole and pass the Ethernet or COAX through with as many turns as we can cram in the hole. Ralph From: [EMAIL PROTECTED] [mailto:

Re: [WISPA] I missed billing a customer for 15 months !

2006-12-11 Thread Jenco Wireless
of event. - Peter Jenco Wireless wrote: I just sent him an e-mail: Hello Mr. XXX . We just did a review of our credit card billing and realized that we have not successfully billed your account since 7/26/05. Our credit card service tried to bill you a few times (6), but for some reason

Re: [WISPA] Automated Tower Climbs

2007-02-16 Thread Jenco Wireless
I e-mailed them and told them it needs a remote pendant (with variable speed - much slower) - if slow enough, we could tie off on the way up with little physical exertion. I am fat and old :-) On 2/16/07, rwf [EMAIL PROTECTED] wrote: Hard to achieve 100% tie off with that contraption, I'm

Re: [WISPA] Ohio-based Slane Telcom Acquires WISPs to Satisfy Consumer Demand

2007-02-23 Thread Jenco Wireless
They tried to buy my company. I wasn't trying to sell so I didn't try too hard! I think I may have been their first try. The offer was really low. They paid a lot more for a lot less on their next acquisition. If I knew they were going to setup in Arizona, I would have played it a lot

[WISPA] Any Trango Command Line Experts?

2008-03-04 Thread Jenco Wireless
link 10fdx and it returns: Eth0 100FDX detected ? I have tried every combination I can think of. Any suggestions would be appreciated!! Thanks, Brad H (Jenco Wireless, LLC) WISPA Wants You! Join today! http

Re: [WISPA] Any Trango Command Line Experts?

2008-03-04 Thread Jenco Wireless
: # eth link 10FDX I think it's case sensitive. Travis Microserv Jenco Wireless wrote: Hi. I can't for the life of me remember how to change a Trango's Ethernet link speed. I need to set it to 10hdx due to interference related to icing. Real nice weather here in Ohio - freezing rain

Re: [WISPA] Bumblebee???? R52H WOES

2008-03-07 Thread Jenco Wireless
would recommend getting one of these meters and setting the Tx down a dB or two for safety (make sure you check the performance) - you need the meter becaust the default settings in MT don't always match - although I believe they are real close on these cards. Brad Hagstrom (Jenco Wireless, LLC

Re: [WISPA] Bumblebee???? R52H WOES

2008-03-07 Thread Jenco Wireless
:17 PM, Mac Dearman [EMAIL PROTECTED] wrote: That's exactly what I was looking for Brad. Thanks for the link. Can you tell me how much that puppy costs??? Mac -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jenco Wireless Sent: Friday

Re: [WISPA] RB333 enclosures

2008-03-07 Thread Jenco Wireless
Hi Mac. If the RB-333 is about the same size as the RB-600, I use the 14 x 12. It's a little tight - I vent them myself so I can change the orientation - the RB would probably fit better the way they have them vented though. http://www.hyperlinktech.com/web/nema_enclosures.php -- Brad H (Jenco

Re: [WISPA] Bumblebee???? R52H WOES

2008-03-08 Thread Jenco Wireless
:[EMAIL PROTECTED] On Behalf Of Jenco Wireless Sent: Friday, March 07, 2008 11:39 AM To: WISPA General List Subject: Re: [WISPA] Bumblebee R52H WOES http://www.bvsystems.com/Products/Power/Butterfly/butterfly.htm Worth every penny. I have tested one or two of the R52H cards

Re: [WISPA] 900 MHz 60 Degree Horizontal Polarization SectorRecommendation

2008-03-22 Thread Jenco Wireless
. Brad H (Jenco Wireless) On Sat, Mar 22, 2008 at 2:20 AM, Wallace L. Walcher [EMAIL PROTECTED] wrote: http://www.superpass.com/902-928MH_60.html -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Unger Sent: Friday, March 21, 2008 12:44 PM

Re: [WISPA] Australian WiMAX pioneer trashes technology asmiserablefailure

2008-03-23 Thread Jenco Wireless
I have a local competitor who uses Wi-Max equipment - maybe even the brand you mentioned (sorry - I don't want sued) - I have had calls from a customer or two of theirs who are looking for something better. I have no way of knowing all of the details (signal strength, etc.), but at one of their

[WISPA] Dual Polarity 900 MHz Antennas

2008-04-08 Thread Jenco Wireless
Hi. Anyone have any thoughts on using a dual polarity antenna (Til-Tek) as opposed to the Canopy standard (6) Integrated AP setup?? Thanks, Brad H (Jenco Wireless, LLC) WISPA Wants You! Join today! http

Re: [WISPA] Dual Polarity 900 MHz Antennas

2008-04-09 Thread Jenco Wireless
that outperformed the Tiltek in 900Mhz yet. There are other brands such as Teletronics and MTI. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Jenco Wireless [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent

[WISPA] UBNT M2 AP's with Legacy CPE's - Tips and Tricks

2010-08-07 Thread Jenco Wireless
think of for now. Thanks List !! Brad Hagstrom, CEO, President, CTO, COO, a few others, and the CFO's Husband Jenco Wireless, LLC WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] fm towers

2007-03-30 Thread Jenco Wireless
FM kills Ethernet. Inductors - Period. Set to 10 Mbps until then. Brad H On 3/30/07, Edward J. Hatfield III [EMAIL PROTECTED] wrote: Nearly 40 dB of variations in the link S/N ratio? Holy cat crap, Batman! How accurate is the test equipment yielding that measurement? SNR variations

Re: [WISPA] FM Radio and Ethernet

2007-05-23 Thread Jenco Wireless
After many hits, I ungrounded, added inductance and lots and lots of surge suppression (not little ethernet supressors) - my experience (or luck) has been that it is better to un-ground. My location has 100 percent clay soil (clay was used as an insulator in the old days), so that may be a

Re: [WISPA] FM Radio and Ethernet

2007-05-26 Thread Jenco Wireless
I forgot to mention, most of the lightning damage (more than 90 percent) I have had has been after long periods with no rain, so the clay had a lot of time to dry out and turn in to an insulator. One Summer my main tower and about 10 percent of my clients were destroyed from one lightning storm.

Re: [WISPA] How much does FCC certification cost?

2007-06-10 Thread Jenco Wireless
I wonder if the new revision 5 RB 532's addressed this issue? On 6/10/07, Travis Johnson [EMAIL PROTECTED] wrote: No. It is emissions from the DC to DC converter on the board. With no cards and no ethernet connection, using just a power supply, it can emit up to +30db of noise in both of

[WISPA] 36 guyed tower

2007-07-28 Thread Jenco Wireless
I have equipment on a 500' tower. The legs are spaced 36 inches apart and it is really, really easy to climb up the inside (I am a little vertically challenged when it comes to height :-). I can't figure out who made it. Anyone have any insight on what manufacturer(s) makes

Re: [WISPA] 36 guyed tower

2007-07-29 Thread Jenco Wireless
tower crew to do the work. Staying tied off might cost you some teeth if you fell but you won't go home dead. Jim Bennett [EMAIL PROTECTED] 317-222-1329 -Original Message- From: Jenco Wireless [mailto:[EMAIL PROTECTED] Sent: Saturday, July 28, 2007 9:43 PM To: WISPA General List

Re: [WISPA] 36 guyed tower

2007-07-29 Thread Jenco Wireless
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jenco Wireless Sent: Sunday, July 29, 2007 3:10 PM To: [EMAIL PROTECTED]; WISPA General List Subject: Re: [WISPA] 36 guyed tower I always tie off, even on the inside. It is just so easy to climb on the inside. The 36 size is perfect

Re: [WISPA] 36 guyed tower

2007-07-29 Thread Jenco Wireless
on the sides that I could get through. With this one, I'd be concerned about rescuing you inside there if something happened. Ralph -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jenco Wireless Sent: Sunday, July 29, 2007 9:59 PM To: WISPA

[WISPA] AntiVirus Sortware

2007-09-07 Thread Jenco Wireless
What's everyone using now? I just got a nasty infection using AVG (fully updated). I guess AVG has not kept up well according to the reviews. Thanks, Brad H ** Join us at the WISPA Reception at 6:30 PM on

Re: [WISPA] AntiVirus Sortware

2007-09-07 Thread Jenco Wireless
: On Fri, September 7, 2007 8:33 pm, Jenco Wireless wrote: What's everyone using now? I just got a nasty infection using AVG (fully updated). I guess AVG has not kept up well according to the reviews. Just out of curiosity, any cites or details on this? We recommend AVG Free to our

Re: [WISPA] AntiVirus Sortware

2007-09-07 Thread Jenco Wireless
Thanks - I am trying it now. Brad H On 9/7/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: The highest rated software is NOD32 by _www.eset.com_ (http://www.eset.com) , compact-not bloated, good price, and available for small home systems as well large corporate systems.

Re: [WISPA] Laptop

2007-09-10 Thread Jenco Wireless
The Lenovo x61 is supposed to be pretty good - I just can't make myself spend that kind of money. On 9/10/07, Brian Rohrbacher [EMAIL PROTECTED] wrote: I need a new one. Anyone got a laptop that works outside well? I can't see the screen on my dell very well. Brian

Re: [WISPA] Re: [WISP] Renting Spectrum Analyzers

2006-01-05 Thread Jenco Wireless
antennas of your own ready to go for testing when you get the unit. It is a big and expensive unit, so don't plan on carrying it up a tower ! Brad Hagstrom Jenco Wireless On 1/5/06, Brian Rohrbacher [EMAIL PROTECTED] wrote: Anyone in love with one of these? http://www.metrictest.com/catalog/views

Re: [WISPA] Re: [WISP] Renting Spectrum Analyzers

2006-01-05 Thread Jenco Wireless
that I have one !! Brad Hagstrom Jenco Wireless On 1/5/06, Butch Evans [EMAIL PROTECTED] wrote: On Thu, 5 Jan 2006, Jenco Wireless wrote: Wow. For the rental price on some of those you can buy one from BVS Systems. I rented one (I can't remember the name but it was an expensive unit

Re: [WISPA] Re: [WISP] Renting Spectrum Analyzers

2006-01-08 Thread Jenco Wireless
(last time I lost everything). Brad Hagstrom (Jenco Wireless) On 1/6/06, Bob Moldashel [EMAIL PROTECTED] wrote: Jenco Wireless wrote: You may want to look at www.bvsystems.com. Their BumbleBee unit does 900, 2.4, and 5.8. It interfaces with a PDA, so that gives you an idea of the size

Re: [WISPA] Re: [WISP] Renting Spectrum Analyzers

2006-01-08 Thread Jenco Wireless
The three models are the freq's in red (1), the freq's in blue (2), and Wi-MAX. I want the red one !! Brad Hagstrom (Jenco Wireless) On 1/7/06, Brian Rohrbacher [EMAIL PROTECTED] wrote: Below, it says three different models. To me, this says it only does one at a time. AM I right

Re: [WISPA] TRANGO- changes history

2006-01-19 Thread Jenco Wireless
that they charged me to repair a long time ago. Brad Hagstrom, Jenco Wireless On 1/18/06, Chadd Thompson [EMAIL PROTECTED] wrote: I am probably far more cynical than most but I really hope that Trango has made a turn around as a company with the latest round of changes. I tend to remember the bad

Re: [WISPA] FM tower co-location

2006-01-24 Thread Jenco Wireless
period (hours), I just work in the suit. I also had a Narda RF monitor, until it had a 460' fall - oops. The bottom line is 50-300 MHz is very dangerous for human exposure. It will cook you like a microwave oven starting with your eyes and testicles. Be careful Brad Hagstrom Jenco

Re: [WISPA] FM tower co-location

2006-01-25 Thread Jenco Wireless
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jenco Wireless Sent: Tuesday, January 24, 2006 9:31 PM To: WISPA General List Subject: Re: [WISPA] FM tower co-location I have. The station on the same tower as me is not a super high power station - I think they broadcast at 12,000

Re: [WISPA] Best Network Card

2006-02-24 Thread Jenco Wireless
Anyone have a good source for these ?? Thanks, Brad H On 1/29/06, Mark Nash [EMAIL PROTECTED] wrote:  Definately the Intel EtherExpress Pro. Mark NashNetwork EngineerUnwiredOnline.Net350 Holly StreetJunction City, OR 97448http://www.uwol.net 541-998-541-998-5599 fax - Original

Re: [WISPA] Pigtails..... and 5.8GHz low power....

2006-03-02 Thread Jenco Wireless
Geta test meter. I got one from BVS Systems and LOVE it ! Roger Peters has had great piggies in the past. I just tested a UFL from Wisp-Router and it was 2 dB better than anything else (UFL) I have tried, but it was only 5 long, so I am sure that has something to do with the better review. Once

Re: [WISPA] Pigtails..... and 5.8GHz low power....

2006-03-02 Thread Jenco Wireless
Wireless Broadband - Original Message - From: Jenco Wireless To: [EMAIL PROTECTED] ; WISPA General List Sent: Friday, March 03, 2006 12:30 AM Subject: Re: [WISPA] Pigtails. and 5.8GHz low power Geta test meter. I got one from BVS Systems and LOVE it ! Roger Peters has had great

Re: [WISPA] Time Warner fiber OHIO price per meg

2010-12-16 Thread Jenco Wireless
I'm paying a little more - $2500 for 40 Megs. I feel ripped off !!! There is a 10% margin built in, so its really 44 Megs (Important to know with Butch's QOS) On Dec 16, 2010 9:06 AM, Kevin Neal ke...@safelink.net wrote: This isn't in Ohio but when we were upgrading our TW fiber in Idaho, the

Re: [WISPA] Time Warner fiber OHIO price per meg

2010-12-16 Thread Jenco Wireless
Of Jenco Wireless Sent: Thursday, December 16, 2010 5:12 PM To: WISPA General List Subject: Re: [WISPA] Time Warner fiber OHIO price per meg I'm paying a little more - $2500 for 40 Megs. I feel ripped off !!! There is a 10% margin built in, so its really 44 Megs (Important to know with Butch's

[WISPA] Wanted to Buy - TrangoLink-45 (with external antenna port)

2011-02-08 Thread Jenco Wireless
Hello everyone. Anyone have one of these they want to sell?? Please hit me off-list at b...@jencospeed.net Thanks !! Brad H WISPA Wants You! Join today! http://signup.wispa.org/

[WISPA] RouterBoard 1100 Simple Queues

2011-02-15 Thread Jenco Wireless
Anyone having an issue with simple queues not working (version 4.15) - maybe RB-1100 related?? Thanks ! Brad Hagstrom WISPA Wants You! Join today! http://signup.wispa.org/

[WISPA] I HATE Lightning!!!

2011-03-03 Thread Jenco Wireless
to buy some of these!! Anyone ever used them, if so, do they work and where did you get them?? Thanks!! Brad Hagstrom (Jenco Wireless, LLC) WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] I'm new, I hope this is the right list...

2011-11-28 Thread Jenco Wireless
Amen On Nov 28, 2011 7:12 PM, Doug Clark d...@txox.com wrote: Rich, Take a look at the failing business model of Clear. They have their own licensed spectrum and in my area they spent close to 140 million dollars on build out. They had their network over-saturated within 6 months of