Re: [WISPA] Anyone heard of SBC Satellite

2008-08-19 Thread Jeromie Reeves
I did not know anyone was still pushing one way satellite internet. Having them as your customer is interesting and might have value but im hard pressed to see it. Stu, not all sat based internet is two way. http://www.whitehawkmedia.com/Attitude/SatLink.asp On Tue, Aug 19, 2008 at 5:15 PM,

Re: [WISPA] I want to port their numbers!!!!

2008-08-26 Thread Jeromie Reeves
If it is a Rural Telcom, then they are exempt from having to allow porting. VZ might just have a deal with them for local cell numbers. If you had a PRI then you can get numbers but still, they do not have to hand you the number from a leaving customer. At least this is where all my research has

Re: [WISPA] I want to port their numbers!!!!

2008-08-26 Thread Jeromie Reeves
telephone company was on it. I should look again as they recently changed names. On Tue, Aug 26, 2008 at 12:49 PM, Chuck McCown [EMAIL PROTECTED] wrote: I am a rural telecom, one of the most rural in the nation. And I wasn't exempt at all. - Original Message - From: Jeromie Reeves [EMAIL

Re: [WISPA] Running Fiber + Sending Sat over it?

2008-08-26 Thread Jeromie Reeves
I am extremely interested in this. I knew DTV would let you setup a mini cable-op but I have not heard about them having any end receivers involved with it. What is the deal with crossing ROW's? I assume this would apply to wireless. Do you know the bandwidth used per channel? On Tue, Aug 26,

Re: [WISPA] Running Fiber + Sending Sat over it?

2008-08-26 Thread Jeromie Reeves
-- From: Jeromie Reeves [EMAIL PROTECTED] Sent: Tuesday, August 26, 2008 6:00 PM To: WISPA General List wireless@wispa.org Subject: Re: [WISPA] Running Fiber + Sending Sat over it? I am extremely interested in this. I knew DTV would let you setup a mini cable-op but I

Re: [WISPA] routers

2008-09-22 Thread Jeromie Reeves
Have you been changing the firmware on them? The majority of the problem with consumer routers is the software is built 'fast and lose'. I find the WRT54G/GS units to work well once changed. Same for the 150/160N. The next largest issue is that they skimp on the hardware resources, the 310 has

Re: [WISPA] routers

2008-09-22 Thread Jeromie Reeves
On Mon, Sep 22, 2008 at 8:45 AM, Charles Wyble [EMAIL PROTECTED] wrote: Jeromie Reeves wrote: Have you been changing the firmware on them? Ah yes I was going to mention that. The majority of the problem with consumer routers is the software is built 'fast and lose'. I find the WRT54G/GS

Re: [WISPA] routers

2008-09-22 Thread Jeromie Reeves
On Mon, Sep 22, 2008 at 8:13 AM, David E. Smith [EMAIL PROTECTED] wrote: Jeromie Reeves wrote: Have you been changing the firmware on them? The majority of the problem with consumer routers is the software is built 'fast and lose'. I find the WRT54G/GS units to work well once changed. We buy

Re: [WISPA] routers

2008-09-22 Thread Jeromie Reeves
Whats not under $100? On Mon, Sep 22, 2008 at 1:34 PM, RickG [EMAIL PROTECTED] wrote: Nice try but I said under $100 :) On Sun, Sep 21, 2008 at 11:51 PM, CHUCK PROFITO [EMAIL PROTECTED] wrote: Ruckus media flex Chuck Profito 209-988-7388 CV-ACCESS, INC [EMAIL PROTECTED] Providing High

Re: [WISPA] Looking for webcam/security software

2008-09-27 Thread Jeromie Reeves
Mark, Im already working today but give me a ring. I should be heading up to Boise too so service is iffy for a ways. On Fri, Sep 26, 2008 at 10:12 PM, [EMAIL PROTECTED] wrote: I'm looking for software that records video and audio from a windows computer (client uses a cam attached to a

Re: [WISPA] gotta love USF!!!!

2008-10-09 Thread Jeromie Reeves
Also, as stated by my local telco when they did this, the cost was in trenching, not in fiber. There was less then a 20% difference between the copper and the fiber. The rest of the project, digging, trenching, pulling, was the same no matter what they did. On Thu, Oct 9, 2008 at 3:17 PM, Blake

Re: [WISPA] RB133Cs

2008-10-20 Thread Jeromie Reeves
Gah! its what i get for being busy. Are they all going to be gone? =-) On Mon, Oct 20, 2008 at 1:31 PM, Blair Davis [EMAIL PROTECTED] wrote: Deal! Mike Hammett wrote: I'm not done replacing them all, so I'm not sure how many I'll have when I'm done. I'm going to guess 10 - 15 boards.

Re: [WISPA] Damn, Ubiquiti

2008-10-22 Thread Jeromie Reeves
They are out to win the market, they really understand how to sling gear to wisps =)I hope very much that they have the supply issue fixed, and anyone who has stock can email me anytime ;-) Anyone have betas and put them to real world tests? On Wed, Oct 22, 2008 at 8:15 AM, Mike Hammett

Re: [WISPA] Damn, Ubiquiti

2008-10-22 Thread Jeromie Reeves
. They do what they say they will do. But just like all 802.11x products, you have to know how to apply them. They will never be a replacement for Canopy but they have their place. - Original Message - From: Jeromie Reeves [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org

Re: [WISPA] Pipe mount

2008-10-24 Thread Jeromie Reeves
If it is cast iron, I just mount what ever antenna directly to it. If I need to extend it I use cast of slightly larger diameter and slip it over. There is a cross cut (+) for 3 inches and 2 hose clamps, keeps it pretty tight. If it is not cast iron or galvanized then I do not touch them. On Fri,

Re: [WISPA] public subnet

2009-12-19 Thread Jeromie Reeves
Unless there is a rouge NAT statement someplace, I do not see anything specific that would be causing this (as described) What about a proxy server ? Are all connections heading out the NAT IP or only HTTP? On Sat, Dec 19, 2009 at 4:40 AM, RickG rgunder...@gmail.com wrote: The thing is they had

Re: [WISPA] public subnet

2009-12-20 Thread Jeromie Reeves
. Will advise. BTW: I agree with you on ICMP. I usually make them allow that, if they want my help :) Thanks! -RickG On Sun, Dec 20, 2009 at 12:06 AM, Jeromie Reeves jree...@18-30chat.netwrote: Unless there is a rouge NAT statement someplace, I do not see anything specific that would

Re: [WISPA] nanostation 5 and WDS question.

2009-01-21 Thread Jeromie Reeves
I have a number of NS5's in WDS mode and they can be accessed from anyplace on the network. Are you using static or dhcp for the NS5? I use static. On 1/21/09, rabbtux rabbtux rabb...@gmail.com wrote: all, Working with my first NS5 and have run into a problem that is more due to my limited

Re: [WISPA] Service vehicle

2009-02-02 Thread Jeromie Reeves
I have a client who had one. Nothing but problems. They got rid of it. They cashed out when gold hit 1k/oz and now live in Yuma. Should`a kept the Miller Mine my parents had, better return on time! lol On Mon, Feb 2, 2009 at 2:12 PM, rea...@muddyfrogwater.us wrote: What's wrong with a PT for

Re: [WISPA] XBOX 360

2009-10-07 Thread Jeromie Reeves
Kahn was trial/shareware. They used your windows key to generate their 21 day key. They used a IRC interface for the chat room. I spent a lot of time on both the IRC room and playing Warcraft I/II Decent and DukeNukem...Mmmm Bubblegum =) On Mon, Oct 5, 2009 at 10:49 AM, Adam Kennedy

Re: [WISPA] MIMO

2006-04-11 Thread Jeromie Reeves
That guy needs to do more research. AirGo MIMO is far better then the other MIMO's products. Netgear dumped the majority of its older MIMO in lue of AirGo because of these reasons. Its pure misunderstanding about AirGo mimo not working with old hotspots. I bought a Pre-N card the week they came

Re: [WISPA] how to send message

2006-04-14 Thread Jeromie Reeves
Brian Rohrbacher wrote: I need to send a picture but I was rejected by the list. What is the format that is small. bmp, jpg, ect What should I use? JPG is fairly small. Host it and send a link. It takes a large amount of bandwidth to send a attachment to a list. say that is a 250KB

Re: [WISPA] Coming soon: The Web toll

2006-05-25 Thread Jeromie Reeves
Is that not that what faster accounts are for?!? Jeromie Cliff Leboeuf wrote: CNN Report… http://www.cnn.com/2006/TECH/internet/05/25/the.web.toll/index.html -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives:

Re: [WISPA] FM Remote Broadcast over Wireless (RBOW ?)

2006-05-30 Thread Jeromie Reeves
What is the budget on this? Does it need to be stereo or high bitrate? 2 PC's with sound cards running winamp/shoutcast would do it. A network MP# player + shoutcast would do it and so could a network stereo extender. Jeromie Jack Unger wrote: I've been asked if an FM broadcast station can

Re: [WISPA] Is this legit email from eBay or a phishing scam?

2006-06-02 Thread Jeromie Reeves
All of ebay lives in 66.135.192.0/19 or 66.135.192.0 - 66.135.223.255 as per there whois info. ebaymainstreet lives at 161.58.14.93 :BIG RED FLAG: Jeromie David E. Smith wrote: Jonathan Schmidt wrote: EBAYMAINSTREET.COM is registered to ebay, inc. If you don't have a WHOIS, go to

Re: [WISPA] Double Ping Replies

2006-06-06 Thread Jeromie Reeves
Is this ip somehow setup as a network or broadcast IP? Ive seen that cause 2 ping replys Jeromie Scott Reed wrote: I had a customer call to say there connection had not been working well today. I started to see what is going on by ping the radio. I get 2 replies for almost every ping.

Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik

2006-08-26 Thread Jeromie Reeves
Looks good. What radio are you using with what looks to be a Realtek SoC? Is that a PoE splitter, a surge supressor, or both? How long is that RF pigtail? Jeromie Brian Rohrbacher wrote: I take a self tapper and run it out the bottom of my metal box, attach a #12 piggy tail, and attach the

Re: [WISPA] Initial SR9 test results

2006-10-13 Thread Jeromie Reeves
Was the test with 5, 10 or 20mhz channels? What was your noise floor at each test site? How was the mobile end mounted? What is the beamwidth on those antennas (or model numbers to look them up) and what elevation were each at? Any tilt on the antennas? Jeromie Joe Laura wrote: Well, I

Re: [WISPA] Routers; OpenWRT

2007-02-09 Thread Jeromie Reeves
On 2/8/07, Brian Whigham [EMAIL PROTECTED] wrote: On Thu, 2007-02-08 at 12:50 -0600, Matt wrote: What I would like to know is what is the cheapest router that is supported by OpenWRT? I'd almost guarantee it's the Buffalo WHR-G54S. I've only one so far. It's been at grandma's house doing a

Re: [WISPA] STOOPID linksys / netgear / etc

2007-02-28 Thread Jeromie Reeves
What if they wanted to share the network but only with people who could figure that out? =-) On 2/28/07, David E. Smith [EMAIL PROTECTED] wrote: Rick Smith wrote: Can't vendors make it so that whatever you use as the securing KEY can't be contained in the hostname, essid or anywhere else ?

Re: [WISPA] iPhone

2007-10-02 Thread Jeromie Reeves
Has anyone picked up a Cect P168, Cect 599, or any of the other iClones? I am thinking I would rather get 4 of the clones for the same price as 1 iPhone (and not be locked into ATT whom does not work out here). So far the only missing feature I want on the clones is wifi On 10/2/07, Brad Belton

Re: [WISPA] iPhone

2007-10-03 Thread Jeromie Reeves
[EMAIL PROTECTED] wrote: Pick up 4 for the price of one? I paid $354 for a brand new, 4GB iPhone on ebay... including shipping. And WiFi is a huge reason to have the iPhone, if you ask me. Travis Microserv Jeromie Reeves wrote: Has anyone picked up a Cect P168, Cect 599, or any

Re: [WISPA] Why the Nokia E70 is better than the iPhone

2007-10-14 Thread Jeromie Reeves
Ive been looking myself, Best price so far has been $150 with a 2yr plan. With no ATT out here I think I will still hold out for a iClone. On 10/14/07, Tom DeReggi [EMAIL PROTECTED] wrote: So... Can any of these phones be aquired inexpensively new from ATT, with a new signup plan? Or are

Re: [WISPA] Why the Nokia E70 is better than the iPhone

2007-10-14 Thread Jeromie Reeves
Jeromie Reeves wrote: Ive been looking myself, Best price so far has been $150 with a 2yr plan. With no ATT out here I think I will still hold out for a iClone. On 10/14/07, Tom DeReggi [EMAIL PROTECTED] wrote: So... Can any of these phones be aquired inexpensively new from ATT, with a new

Re: [WISPA] Alternative to Meraki mesh??

2007-10-25 Thread Jeromie Reeves
You can dump their software and build your own. I have not seen anything else quite like them but would also like to know what else exists. On 10/25/07, Anthony Lemons [EMAIL PROTECTED] wrote: Anyone know if there is an equipment line along the lines of what Meraki is selling? I've been

Re: [WISPA] Alternative to Meraki mesh??

2007-10-25 Thread Jeromie Reeves
Tony, Does your product allow multi SSID's and routed wds links? Do you have or plan to have a out door omni unit? The optional poe protection is nice looking. Jeromie On 10/25/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Anthony Our complete RWR HPG product line has Mesh based on OLSRd

Re: [WISPA] Politics as Usual

2007-10-26 Thread Jeromie Reeves
My take is that this is the that fateful first step on a very slippery slope. Today they rate shape the traffic, next week they out right block it. I agree that any provider needs to use what ever tools they have to keep users in line. The problem that Forbes is pointing out (I think) is that they

Re: [WISPA] Routers with DHCP Problems

2007-11-01 Thread Jeromie Reeves
I have used many WHR HP's with openwrt and ddwrt and never had the dhcp server stop (some have 20PC's on them). I have v24 rc2 09/04/07 on most of them, iirc I went to RC3 about 2? 3? weeks ago. I would roll back to this version or one very close and see what happens. If the dhcp keeps going out I

Re: [WISPA] Please Use Caution During Installs

2007-11-05 Thread Jeromie Reeves
Oh man that does not look fun at all. Am I understanding this right, you were 4ft off the ground hung by your arm? Hope you have some pain meds and a updated tetanus shot. On 11/5/07, JohnnyO [EMAIL PROTECTED] wrote: This didn't happen during an install, but it happened while climbing a ladder

Re: [WISPA] Please Use Caution During Installs

2007-11-05 Thread Jeromie Reeves
PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Monday, November 05, 2007 4:17 PM To: WISPA General List Subject: Re: [WISPA] Please Use Caution During Installs Oh man that does not look fun at all. Am I understanding this right, you were 4ft off the ground hung

Re: [WISPA] WR 900 question

2007-11-16 Thread Jeromie Reeves
Ehh I do not know about through it self. I do know that small spaces can will suck air (and water vapor with it) in as they do the heat/cool cycles due to pressure changes. This can be seen by leaving a kids sealed plastic toy out side for a few weeks. If you wish to test it you first have to

Re: [WISPA] WR 900 question

2007-11-16 Thread Jeromie Reeves
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Friday, November 16, 2007 4:53 PM To: WISPA General List Subject: Re: [WISPA] WR 900 question Ehh I do not know about through it self. I do know that small spaces can will suck air

Re: [WISPA] Fw: Tower Sway

2007-11-22 Thread Jeromie Reeves
Looked to me they had at least one snapped guy wire. Storm damage or a errant backhoe maybe? Wonder if it was fixed or if it came down. On 11/21/07, Marlon K. Schafer [EMAIL PROTECTED] wrote: Holy error rates Batman! LOL, even *I* know this isn't the way to build a tower for all of those big

Re: [WISPA] CALEA

2007-11-30 Thread Jeromie Reeves
It looks like the FCC making us be CALEA compliant was a total waste of time effort (on both parties sides) and only made a atmosphere of fear. It also sounds like while they filed for information that has classically been available pre-calea, has anyone had to comply with the real time streaming

Re: [WISPA] Hotspot APs

2007-12-10 Thread Jeromie Reeves
If they had not dried up, Buffalo units with openwrt/ddwrt and a pptp/pppoe tunnel back to a mikrotik. There are a number of other compatible units. I wold sugest anything that will let you do a tunnel back to a central hotspot. You can have MT only allow them X time and/or Y bits. On 12/10/07,

Re: [WISPA] Wireless industry slams NAB's white space 'misinformation'

2008-01-18 Thread Jeromie Reeves
Can you explain why you feel that way? On 1/17/08, Marlon K. Schafer [EMAIL PROTECTED] wrote: I've sent a note to WIA and asked if they'd be interested in a discussion focused on finding common ground between them and us. It's my belief that WISPA needs to fight tooth and nail to keep

Re: [WISPA] Wireless industry slams NAB's white space'misinformation'

2008-01-18 Thread Jeromie Reeves
that by personal portable devices he means things like cordless phones, wireless headsets, etc etc. If I understand that right, I would have to concur wholeheartedly. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeromie Reeves Sent: Friday, January 18, 2008 5

Re: [WISPA] Wireless industry slams NAB's whitespace'misinformation'

2008-01-18 Thread Jeromie Reeves
that for disinterest vs. time crunch issues. laters, marlon - Original Message - From: Jeromie Reeves [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Friday, January 18, 2008 7:23 AM Subject: Re: [WISPA] Wireless industry slams NAB's whitespace'misinformation' I assumed

Re: [WISPA] [Fwd: Re: Wireless industry slams NAB's white space'misinformation']

2008-01-18 Thread Jeromie Reeves
On 1/18/08, Mac Dearman [EMAIL PROTECTED] wrote: I have mixed thoughts about backing any stand that is for allowing portable devices in this spectrum. I deal (daily) in a trash hole of spectrum because of these very same portable devices. What do you Wireless Internet Service Providers want

Re: [WISPA] [Fwd: Re: Wireless industry slams NAB's white space'misinformation']

2008-01-18 Thread Jeromie Reeves
I think the key would be that these portable devices require a AP to talk to, and that AP's be limited as licensed devices (like 3650). The protocol would need to be setup so that they do not talk unless they can hear a AP (and handshake a stable link). This is my opinion of the best middle ground

Re: [WISPA] FCC Certifiable MikroTik? YES!!

2008-01-23 Thread Jeromie Reeves
And is there a 5ghz version available? 2.4 is pretty well hosed here due to 2wire 400mw units. 10 miles out I can hear 30 to 50+ units over 5~10 min (these units are all 8+mi away). At the primary tower its hundreds over 5~10 min. Now if only all those units would drop to ch 1, where a cellco has

Re: [WISPA] Small footprint $399 laptop

2008-02-01 Thread Jeromie Reeves
I used to have a Fujitsu Lifebook, it ran win2k and had a eth port and a touch screen. The screen was half height resolution (512x768 iirc). On 2/1/08, David E. Smith [EMAIL PROTECTED] wrote: Ron Wallace wrote: To All, about 6-8 weeks ago someone mentioned a 399 dollar notebook PC. Does

Re: [WISPA] MT vs StarOS

2008-02-09 Thread Jeromie Reeves
What about 5mhz channels? Do you have enough signal to try 40 mhz? I am about to replace 5 links with MT 5.8. Does more CPU help on the sending side, say P4 to RB133/333. On 2/9/08, Travis Johnson [EMAIL PROTECTED] wrote: Here is a real world MT test running RB532's (333mhz) with v3.2 OS:

Re: [WISPA] MT vs StarOS

2008-02-09 Thread Jeromie Reeves
power as the RB532s... and I have some of those on the way already. ;) Travis Microserv Jeromie Reeves wrote: What about 5mhz channels? Do you have enough signal to try 40 mhz? I am about to replace 5 links with MT 5.8. Does more CPU help on the sending side, say P4 to RB133/333

Re: [WISPA] MT vs StarOS

2008-02-09 Thread Jeromie Reeves
Microserv Jeromie Reeves wrote: Sounds good. In the next week or two (depends on weather) I will be changing my main links. Good to have some numbers to compare against. I will make a note to post my numbers (P4 to RB133). What about signal levels and mpci cards used? Now if MT would allow

Re: [WISPA] Ubiquiti NanoStations

2008-02-23 Thread Jeromie Reeves
Same Here, 6 week lead time so far On 2/23/08, Smith, Rick [EMAIL PROTECTED] wrote: Where'd you get em ? No one can find any stock anywhere, and I'd like to buy 2 of em ASAP. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Lentz Sent:

Re: [WISPA] Uh-Oh, they are ready to discipline Internet service providers

2008-02-25 Thread Jeromie Reeves
You should watch what you say, it might happen, or something close. http://www.consumeraffairs.com/news04/2008/02/ms_fat.html On 2/26/08, Kurt Fankhauser [EMAIL PROTECTED] wrote: Right, it's unregulated business, if the customers don't like it then go find another provider, where will it

Re: [WISPA] Laptop Battery

2008-03-16 Thread Jeromie Reeves
Laptop make/model? Each have their own quirks as to the power system. Example, Dells are ok to run with no battery, Compaqs tend to get upset, Acers are hit and miss and i'm sure there are exceptions with in each. Depending on make/model the power/battery leds should inform you as to the status of

Re: [WISPA] Laptop Battery

2008-03-17 Thread Jeromie Reeves
. Nobilis tech support said to send it back for them to look at it, no help over the phone. -- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Jeromie Reeves [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent

Re: [WISPA] Hydrogen Power

2008-03-24 Thread Jeromie Reeves
http://www.fuelcells.org/basics/types.html I have been looking at doing the same. The cost/benefit ratio just is not there yet from what I have seen. Not unless you can store a very large amount of fuel and need long (months +) run times between regeneration/refueling. If I have missed something I

Re: [WISPA] Crimper recommendations

2008-04-07 Thread Jeromie Reeves
Paladin 8000 multi die crimper. Used to 5 or 6 sets for it, from DSub to RJ11/6/45. Some of the dies are off brand that I picked up at a local flee market. The RJ45 came with it, cost about $60 shipped. I will only use clam shell from the nose crimpers, every single side crimper I have used made

Re: [WISPA] help! replacement MT based 5.8G system connects, but no ping!

2008-07-01 Thread Jeromie Reeves
A quick way to check connectivity is to look at the neighbor list. You should see the other system (and as a bonus its IP). If you do not then something else is wrong (be sure the interfaces have it enabled). As mentioned, turn off the encryption and get it working first. Double check the arp

Re: [WISPA] Nanostations

2008-07-20 Thread Jeromie Reeves
Oswave says there is no NS2/5 support and will not be. DD-WRT has support. That is a shame since ros/sos seam not to have plans to support them. I wonder how much effort/money it would be to get Ubiquity to solicit a firmware from someone? On Sun, Jul 20, 2008 at 10:00 AM, Gino Villarini [EMAIL

Re: [WISPA] Nanostations

2008-07-20 Thread Jeromie Reeves
to find it, can you post a link. On Sun, Jul 20, 2008 at 10:50 AM, Gino Villarini [EMAIL PROTECTED] wrote: The oswave website says it supports the NS platform -Original Message- From: Jeromie Reeves [EMAIL PROTECTED] Sent: Sunday, July 20, 2008 1:38 PM To: WISPA General List wireless

Re: [WISPA] sprint 4g reviews?

2010-06-04 Thread Jeromie Reeves
Yes it is, Sprint owns Clear and they are releasing a phone (HTC 4G) some time soon. The times I used it, it was not very good at all. High ping, low bandwidth, but these were all the 'pro' install cabled to a indoor AP. On Fri, Jun 4, 2010 at 5:34 PM, Josh Luthman j...@imaginenetworksllc.com

Re: [WISPA] Repeater

2010-06-07 Thread Jeromie Reeves
The Ubnt Nano M's can pass power to the 2nd port. I have a number of them out there. For the most part, I love it. I have one that is acting up, but that is due to a lost password (or more likely a fat fingered one) On Mon, Jun 7, 2010 at 7:23 AM, Josh Luthman j...@imaginenetworksllc.com wrote:

Re: [WISPA] Repeater

2010-06-07 Thread Jeromie Reeves
That is nice to know, I never looked at the 2.4 rocket as I had no plans to use it. Now, mmm, for some very rural links that might do. On Mon, Jun 7, 2010 at 8:36 AM, Josh Luthman j...@imaginenetworksllc.com wrote: 2.4 does 5 and 3.65 do NOT http://www.ubnt.com/rocketm Josh Luthman

Re: [WISPA] Repeater

2010-06-07 Thread Jeromie Reeves
That is what I do. It works well for hitting small pockets, a dozen people or so,plus I use it when the client wants a AP. People are not allowed to connect things to the network with out permission, if they do, and it runs their bill up, they get the idea quickly. On Mon, Jun 7, 2010 at 10:08

Re: [WISPA] legal entity type - was taxes

2010-06-08 Thread Jeromie Reeves
Mmm sounds like a good CPA! I am thinking it is time to go LLC but have learned not to trust a local CPA (everything from loose lips to horrible security breaches by the common passerby). On Tue, Jun 8, 2010 at 6:49 PM, Aaron D. Osgood aosg...@streamline-solutions.net wrote: Ours charges closer

Re: [WISPA] legal entity type - was taxes

2010-06-09 Thread Jeromie Reeves
find a CPA in a nearby, bigger city? Thats what I'm considering. On Tue, Jun 8, 2010 at 9:53 PM, Jeromie Reeves jree...@18-30chat.net wrote: Mmm sounds like a good CPA!  I am thinking it is time to go LLC but have learned not to trust a local CPA (everything from loose lips to horrible security

Re: [WISPA] Google is out of control.

2010-06-10 Thread Jeromie Reeves
The Future On Wed, Jun 9, 2010 at 10:24 PM, Robert West robert.w...@just-micro.com wrote: What be this Google visual abomination!!! YAR! WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Google is out of control.

2010-06-10 Thread Jeromie Reeves
You can click the change background link and change it back to white. The 'Future' I spoke of was a sunlit desert or was it a dessert? The mirage is kinda fuzzy after that kool-aid. WISPA Wants You! Join today!

Re: [WISPA] Burying Cable

2010-06-10 Thread Jeromie Reeves
I made one for a 4 wheeler once. It was a 3 30in blades from a old saw mill, bolted into 1. Just made a frame and bearing setup and put in on in place of the snow blade. Used some narrow tube stock to make the feeder behind the blade. We used it to push 1/2 conduit down. On Thu, Jun 10, 2010 at

Re: [WISPA] Google is out of control.

2010-06-11 Thread Jeromie Reeves
in page. -- At 08:47 AM 06/10/2010 -0700, Jeromie Reeves wrote: --- You can click the change background link and change it back to white. The 'Future' I spoke of was a sunlit desert or was it a dessert? The mirage is kinda fuzzy after that kool-aid. -- END QUOTE

Re: [WISPA] Google is out of control.

2010-06-11 Thread Jeromie Reeves
1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Fri, Jun 11, 2010 at 11:25 AM, Jeromie Reeves jree...@18-30chat.net wrote: Thats a new feature of Google. Fading in the links, when

Re: [WISPA] Looking for 900 MHz pioneers

2010-06-14 Thread Jeromie Reeves
Same here. Competitor on 900, Power co-op used some 900 but ended up going with turtle meters (basically X10 built into the meter) and has data links from all the sub-stations. I am going to give Ubnt 900 a go, for those I need it, I do not care how it works clients who have no location options

Re: [WISPA] Looking to Sell..........

2010-06-14 Thread Jeromie Reeves
http://shop.wirelessguys.com/s.nl/it.A/id.4188/.f?sc=13category=3529 Those have a very heavy mount and the expected gain. The ones with the cheap metal clip on can go right up the designers back side. Seriously poor design on those. I have replaced most of the feeds with the same feeds as the

Re: [WISPA] Looking to Sell..........

2010-06-15 Thread Jeromie Reeves
- From: Jeromie Reeves jree...@18-30chat.net To: WISPA General List wireless@wispa.org Sent: Monday, June 14, 2010 8:51 PM Subject: Re: [WISPA] Looking to Sell.. http://shop.wirelessguys.com/s.nl/it.A/id.4188/.f?sc=13category=3529 Those have a very heavy mount and the expected gain

Re: [WISPA] Looking to Sell..........

2010-06-15 Thread Jeromie Reeves
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jeromie Reeves Sent: Tuesday, June 15, 2010 9:28 AM To: WISPA General List Subject: Re: [WISPA] Looking to Sell.. Oh I do not do ANY 2.4 ghz links other then APs for houses or small groups of houses (IE Picos

[WISPA] It only feels like Friday

2010-06-22 Thread Jeromie Reeves
Interesting read of the short version. Is universal net access good or bad or should we be spending that money on other things, like better parent education? http://www.theregister.co.uk/2010/06/21/digital_divide_worsened_by_tech/ From the linked page for the research paper You should expect a

Re: [WISPA] Maximum sector power?

2010-06-23 Thread Jeromie Reeves
Do not forget OOB and the likes. I have been using AirView for a while to check on my sites and some were unacceptable to me (5mhz but still hitting 10 or 20mhz at -85) so I replaced the cards (all MT sites). I am unsure if the cards are bad, going bad, or just how they were working from day one.

Re: [WISPA] Maximum sector power?

2010-06-24 Thread Jeromie Reeves
I am not driving them past the default power, and often at lower then max modulations. The replaced cards are working closer to expected (still some bleed over but well under what the others were doing). The nano still spews like a collage student after sumer break. I am going to drop its

Re: [WISPA] Wierd StarOS/OLSR - Ubiquity RocketM5 bridge - Cisco issue

2010-06-25 Thread Jeromie Reeves
Add in some packet sniffing time on the VLAN and watch OLSRs updates, it should tell you what is causing the issue. On Thu, Jun 24, 2010 at 5:27 PM, Michael Baird m...@tc3net.com wrote: Turn off extra reporting on the Ubiquities. Regards Michael Baird Sounds like Cisco / Vlan is giving you

Re: [WISPA] Network Redesign

2010-06-26 Thread Jeromie Reeves
We use 10./8 for the network. Then, route single publics out to the end points (yes, the 10's show up in public trace routes and time out, shoot me!) PPPoE would take care of that and was the plan to move to. MT has not implemented pppoe forwarding as yet, so we have a choice of having many

Re: [WISPA] Mikrotik question

2010-07-06 Thread Jeromie Reeves
NEW and IMPROVED!! From AcmE AbaCo. AbacusProMultiCore!! and for those New Math Users we have !sucabAPro. Coming soon, MultiUser Long 'Word' Support! On Tue, Jul 6, 2010 at 7:03 PM, RickG rgunder...@gmail.com wrote: LOL! Now you know the next upgrade will be Abacus386 :) On Tue, Jul 6, 2010

Re: [WISPA] Pole-mounted base stations

2010-07-19 Thread Jeromie Reeves
How much for a 17.5 ? On Mon, Jul 19, 2010 at 3:31 PM, Phil Curnutt pcurn...@gmail.com wrote: http://gmesupply.com/roof-towers-c-9.html Just installed a 17.5 foot one.   Very nice. Phil On Mon, Jul 19, 2010 at 4:25 PM, Mike m...@aweiowa.com wrote: Something like these:  

Re: [WISPA] net neutrality, there may be hope yet...

2010-08-03 Thread Jeromie Reeves
That whole slippery slope thing. Its easy to forget that once they (They are them. They are they. That are the Men in Black) it will not be simple or easy. Once telcos really start losing to WISPs you will see them fight all the harder. There are some good telcos out there (IIRC some one on the

Re: [WISPA] Tower site thefts

2010-08-20 Thread Jeromie Reeves
That, and there is no proof that they ARE the ones responsible for doing it, as yet reported. Likely, since one or both of them seam loose lipped, they will confess to at least some of the sites in question. They were only caught at one site after all. On Fri, Aug 20, 2010 at 10:53 AM, Blake

Re: [WISPA] Changign DHCP timeout XP/WIn7

2010-08-20 Thread Jeromie Reeves
When I used Windows, a program called tftpd32 was a life saver. Does tftp (for router flashing) does syslog (for log testing) and dhcp (to your self!) so you can avoid having to wait. a quick cmd -- ipconfig /release cr ipconfig /renew and you have what ever IP you need. Once I went full Gentoo,

Re: [WISPA] Tower site thefts

2010-08-20 Thread Jeromie Reeves
There are good $75 ethernet cameras. Use a linux PC for the DVR/Face Rec/Alerts On Fri, Aug 20, 2010 at 8:05 PM, Ralph ralphli...@bsrg.org wrote: This is right next to one of our sites. Glad they caught them! Subject: [WISPA] Tower site thefts

Re: [WISPA] Tower site thefts

2010-08-20 Thread Jeromie Reeves
most of them have a a automatic FTP upload or other streaming feature. VLC on the backend works as do a few other options On Fri, Aug 20, 2010 at 8:49 PM, RickG rgunder...@gmail.com wrote: In that case, what do you use for the DVR software? On Fri, Aug 20, 2010 at 11:28 PM, Jeromie Reeves

Re: [WISPA] Tower site thefts

2010-08-20 Thread Jeromie Reeves
knows we need them down here! Be an organ donor, sign your donor card today. - Original Message - From: Jeromie Reeves jree...@18-30chat.net To: WISPA General List wireless@wispa.org Sent: Friday, August 20, 2010 3:08 PM Subject: Re: [WISPA] Tower site thefts

Re: [WISPA] Tower site thefts

2010-08-21 Thread Jeromie Reeves
. - Original Message - From: Jeromie Reeves jree...@18-30chat.net To: WISPA General List wireless@wispa.org Sent: Saturday, August 21, 2010 12:33 AM Subject: Re: [WISPA] Tower site thefts Now see, you are not playing fair. The article in the link does not say that. For what you have said

Re: [WISPA] no net but ping works

2010-08-25 Thread Jeromie Reeves
Have a client with the problem do a nslookup before a ping. It sounds much like a dns or a arp issue as mentioned. Can you route each Powerstation ? I like to bridge the AP (with dedicated ports behind them) and WDS the clients (with their radios running internal routed 10.x subnets , no nat!).

Re: [WISPA] no net but ping works

2010-08-26 Thread Jeromie Reeves
Or just has a small ARP table. When I first started using Ubnt I had issues with cheap switches and end user routers due to the CDP they use. Once implementing the network design that we had on paper, things snapped right up. On Thu, Aug 26, 2010 at 10:15 AM, Jerry Richardson

Re: [WISPA] no net but ping works

2010-08-26 Thread Jeromie Reeves
That sounds like a arp issue at the AP or the gateway. What is the gateway device? On Thu, Aug 26, 2010 at 9:38 AM, Mark Dueck m...@netking.bz wrote: I went to a client again, and did some nslookups.  here's what I found: All radios are setup as dns relay.  When I got to the client, he had

Re: [WISPA] no net but ping works

2010-08-26 Thread Jeromie Reeves
. We had some similar stuff going on when we tried to use bullets to replace a trango. Any ubiquity or other .11 gear should be running WDS to ensure transparent MAC passthrough. Jerry Richardson Sent Mobile On Aug 26, 2010, at 10:24 AM, Jeromie Reeves jree...@18-30chat.net wrote

Re: [WISPA] Comcast

2010-08-27 Thread Jeromie Reeves
On Fri, Aug 27, 2010 at 7:40 AM, Matt lm7...@gmail.com wrote: Wouldn't you have to get them to run BGP over this connection, so you can keep things online? I suppose this would work if you were really desperate, and willing to basically NAT your whole network, but you wouldn't want to do I

Re: [WISPA] Comcast

2010-08-27 Thread Jeromie Reeves
On Fri, Aug 27, 2010 at 9:21 AM, Matt lm7...@gmail.com wrote: Wouldn't you have to get them to run BGP over this connection, so you can keep things online? I suppose this would work if you were really desperate, and willing to basically NAT your whole network, but you wouldn't want to do I

Re: [WISPA] Slight variations in antenna height, big path loss change

2010-08-30 Thread Jeromie Reeves
I have seen the same, and it goes away (for me) when setting it to pull the topo data directly from the files instead of memory and setting the samples to 1000. On Mon, Aug 30, 2010 at 4:05 PM, MDK rea...@muddyfrogwater.us wrote: I won't claim any great expertise here, but I have seen the same

  1   2   3   4   >