Re: [WISPA] Weird signal levels

2008-07-26 Thread lakeland
Getting better??? Water somewhere Sent from my Verizon Wireless BlackBerry -Original Message- From: Mark McElvy [EMAIL PROTECTED] Date: Sat, 26 Jul 2008 17:11:49 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Weird signal levels But why would it be getting better?

Re: [WISPA] Court Injunction

2008-08-04 Thread lakeland
Jerry You may get an initial injunction but as a Part 15 user you don't have much in the line of rights as far as federal law is concerned unless you can show willful interference from he ham. From a business point of view anything is possible in court Unfortunately amateur radio becomes

Re: [WISPA] Court Injunction

2008-08-04 Thread lakeland
Where are u located Jerry? Sent from my Verizon Wireless BlackBerry -Original Message- From: Jerry Richardson [EMAIL PROTECTED] Date: Mon, 4 Aug 2008 12:45:17 To: Jerry Richardson[EMAIL PROTECTED]; WISPA General Listwireless@wispa.org; [EMAIL PROTECTED]; Motorola Canopy User

Re: [WISPA] Court Injunction

2008-08-04 Thread lakeland
I personally worked in the 911 system during 9-11 and I can say that most of the emergency traffic was self generated and duplicate to info that was already exchanged by other means. While I agree that they may have a place during emergencies I say that they should use 2 meters and 440 for

Re: [WISPA] Court Injunction

2008-08-04 Thread lakeland
Last one out turn off the light. LOL That was classic! Tnx Blake Sent from my Verizon Wireless BlackBerry -Original Message- From: Blake Bowers [EMAIL PROTECTED] Date: Mon, 4 Aug 2008 15:54:01 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Court Injunction And

Re: [WISPA] Court Injunction

2008-08-04 Thread lakeland
Ok. You can have 20 and 40 meters. Give up the Vhf and Uhf. It goes back to all licenseesuse it or loose it Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Chuck McCown - 3 [EMAIL PROTECTED] Date: Mon, 4 Aug 2008 15:34:03 To: WISPA General

Re: [WISPA] Harmonic Frequencies

2008-08-07 Thread lakeland
Could also be something traveling down your cat5 into the unit and creating havoc. These types of problems are more likely at high powered sites than harmonics. Try another unit if possible. Verify good grounding and bonding practices. Good luck Bob Sent from my Verizon Wireless BlackBerry

Re: [WISPA] coax cables

2008-08-12 Thread lakeland
No Sent from my Verizon Wireless BlackBerry -Original Message- From: RickG [EMAIL PROTECTED] Date: Tue, 12 Aug 2008 10:33:57 To: WISPA General Listwireless@wispa.org Subject: [WISPA] coax cables I'm running coax down my tower and came across and RG8/U. Can this be used on 5GHz? -RickG

Re: [WISPA] coax cables

2008-08-12 Thread lakeland
It can but the loss is high and the braid is much less. Stick with LMRs 400 *,5 '22@ )+_3 2,/(:4 32* 4:+3( Sent from my Verizon Wireless BlackBerry -Original Message- From: RickG [EMAIL PROTECTED] Date: Tue, 12 Aug 2008 10:33:57 To: WISPA General Listwireless@wispa.org Subject: [WISPA]

Re: [WISPA] Tower site licensing problem

2008-08-12 Thread lakeland
OTARD and PRB1 do not pertain to AP or backhaul locations Sent from my Verizon Wireless BlackBerry -Original Message- From: Chuck McCown - 3 [EMAIL PROTECTED] Date: Tue, 12 Aug 2008 08:43:37 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Tower site licensing problem

Re: [WISPA] coax cables - RG8/U

2008-08-12 Thread lakeland
Yes. Sent from my Verizon Wireless BlackBerry -Original Message- From: RickG [EMAIL PROTECTED] Date: Tue, 12 Aug 2008 11:06:08 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] coax cables - RG8/U I thought so. Thats why I asked. So, LMR400 or 600? -RickG On Tue, Aug 12,

Re: [WISPA] coax cables - RG8/Uuse TUE, AUG 12, 2008ยป

2008-08-12 Thread lakeland
Use LDF4.5 Heliax for this run. Sent from my Verizon Wireless BlackBerry -Original Message- From: RickG [EMAIL PROTECTED] Date: Tue, 12 Aug 2008 10:55:16 To: WISPA General Listwireless@wispa.org Subject: [WISPA] coax cables - RG8/U I hate radios at the top of the tower so I'd like to

Re: [WISPA] coax cables

2008-08-20 Thread lakeland
Eliptical waeguide is also $13 a foot, connectors are over $200 each, you need a bunch of special hardware to hang it and a dehydrator or nitrogen system to keep it dry. I just don't picture the WRAP board group buying waveguide Bob Sent from my Verizon Wireless BlackBerry -Original

Re: [WISPA] coax cables

2008-08-20 Thread lakeland
No not crazy and very educated on the matter. LMR over regular RG8 coax And LMR600 over 1/2 heliax. Use your words a little more careful Bob --Original Message-- From: Matt Jenkins To: Lakeland To: WISPA General List Subject: Re: [WISPA] coax cables Sent: Aug 19, 2008 11:45 PM

Re: [WISPA] Running Fiber

2008-08-20 Thread lakeland
Directional bore rig. You should be able to find a utility contractor who has one. Pricing here in NY is about $10 foot which icludes the bore and placement of 1 1/2 HDPE pipe. Gotta be cheaper by you but still a lot of money Bob Sent from my Verizon Wireless BlackBerry -Original

Re: [WISPA] 3.65 SUO initial config

2008-08-30 Thread lakeland
What are the street prices on the base and sub? Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Eric Muehleisen [EMAIL PROTECTED] Date: Sat, 30 Aug 2008 22:03:00 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] 3.65 SUO initial config I did 6 miles

Re: [WISPA] link across airport?

2008-09-03 Thread lakeland
No. The only reason would be if all the licensed spectrum was occupied Sent from my Verizon Wireless BlackBerry -Original Message- From: Randy Cosby [EMAIL PROTECTED] Date: Wed, 03 Sep 2008 12:20:53 To: wireless@wispa.org Subject: [WISPA] link across airport? I am getting ready to put

Re: [WISPA] Tower general contractors

2008-09-05 Thread lakeland
Randy You should be able to call Crown and ask them for a list of authorized cobtractors. They should be able to supply you names. You may want to check with Crown and make sure the contractor does not have to be approved by them. Get it in writing if they say no BEFORE signing your contract

Re: [WISPA] quality rugged, outdoor-friendly switches?

2008-09-07 Thread lakeland
I second Eric's nomination on the 2955 and the Moxa. We have over 400 Cisco's in the field on a big municipal video project without a hickup Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Eric Muehleisen [EMAIL PROTECTED] Date: Sun, 07 Sep 2008 09:26:41 To:

Re: [WISPA] Distance on 18ghz with 2' dishes?

2008-09-09 Thread lakeland
Depends on manufactuer, product and reliabilty goal. Sent from my Verizon Wireless BlackBerry -Original Message- From: John McDowell [EMAIL PROTECTED] Date: Tue, 9 Sep 2008 15:52:17 To: Motorola Canopy User Group[EMAIL PROTECTED]; WISPA General Listwireless@wispa.org Subject: [WISPA]

Re: [WISPA] filtered power in cop cars for wireless gear

2008-10-04 Thread lakeland
Run all your power cnnections, including the ground wires. Most police package cars have high quality ingnition package ( resistor plugs, wires, etc) to reduce radio/rf noise. When we placed MDT systems in these vehicles we had almost no problems related to noise on the power side. Bob Sent

Re: [WISPA] filtered power in cop cars for wireless gear

2008-10-04 Thread lakeland
This should have said runn all your power connections directly to the battery. Maintaining clean battery connections (no corrosion, etc) is extremely important. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: [EMAIL PROTECTED] Date: Sat, 4 Oct 2008 19:17:22 To:

[WISPA] OT Network Question

2008-10-11 Thread lakeland
I am not a net guy so here is probably a quick easy question. If there are two switches on a network does it effect network traffic or is it strictly a management issue only? Tnx Bob Sent from my Verizon Wireless BlackBerry

[WISPA] OT. Network Question

2008-10-12 Thread lakeland
It was just brought to my attention that I omitted an important piece of my question last night. Let's try it again... If two switches on the same network HAVE THE SAME IP, will it effect network traffc??? Bob Sent from my Verizon Wireless BlackBerry

Re: [WISPA] Trylon Titan Foundation Work

2008-10-15 Thread lakeland
Easy project Foundation for a 40 Trylon is probably something like 6 x 6 x 4'. Any concrete contractor should be able to do this real cheap. 6 yards of crete at $90 or so a yard. Rent a mini excavator for about $200. Rebar the hole another couple of hundred. Install the base, make sure its

[WISPA] FYI

2008-10-20 Thread lakeland
* Broadcasters petition to extend white-spaces comments http://e.ccialerts.com/a/hBI-M2xAHh2IuAHyVkRAKLyQjMU/cdb1 Sent from my Verizon Wireless BlackBerry WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] OT, just wondering

2008-10-28 Thread lakeland
You have too much spare time on your hands Sent from my Verizon Wireless BlackBerry -Original Message- From: Marlon K. Schafer [EMAIL PROTECTED] Date: Tue, 28 Oct 2008 08:01:35 To: WISPA General Listwireless@wispa.org Subject: [WISPA] OT, just wondering How many barrels of oil per day

Re: [WISPA] star os help

2008-10-30 Thread lakeland
Told ya Marlon. Told ya so :-) Sent from my Verizon Wireless BlackBerry -Original Message- From: 3-dB Networks [EMAIL PROTECTED] Date: Thu, 30 Oct 2008 10:05:14 To: 'WISPA General List'wireless@wispa.org Subject: Re: [WISPA] star os help Marlon... call Matt Larsen. I know he

Re: [WISPA] FCC licensing

2008-10-30 Thread lakeland
They might not be licensed. Go past the transmitter site, get the gps coordinates and enter them into the FCC search site and see what comes up Wouldn't be the first unlicensed licensed link I have seen -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Travis

Re: [WISPA] billboards

2008-10-31 Thread lakeland
Travis Alan Marsalis was doing that before he sold ShreveNet. I believe the only real issue he had was electrical power not being at a lot of sites I know Clear Channel is doing site leasing on their billboards and I can't remember the name of the other big company that Alan was dealing with.

Re: [WISPA] My favorite quotes from the FCC TVWS meeting today...

2008-11-06 Thread lakeland
Anyone want to buy 13 bad Orthogon power supplies??? ;-) Can't compare the two. Orthogon is sales bandwidth. Licensed is true bandwidth -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Brad Belton [EMAIL PROTECTED] Date: Thu, 6 Nov 2008 09:41:59 To: 'WISPA

Re: [WISPA] Stand offs for a water tower question...

2008-11-08 Thread lakeland
V- CSW is the way to go. In my book magnets on an elevated structure is just a bad idea. I know we have expelled a ton of bandwidth in the past on this subject but I would look at how it would reflect in court if I had an issue. I would not put anything on a tank I could not repel (descend)

Re: [WISPA] one more

2008-11-21 Thread lakeland
When I think a bout that I work harder so I can stay in the Carribean longer :-) Now if we could just turn snow into fuel.. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Travis Johnson [EMAIL PROTECTED] Date: Thu, 20 Nov 2008 21:47:57 To: WISPA General

Re: [WISPA] FW: one more

2008-11-21 Thread lakeland
I would love to be that close to death -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Joe Laura [EMAIL PROTECTED] Date: Fri, 21 Nov 2008 10:46:12 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] FW: one more I did some work in Grand Cayman for

Re: [WISPA] WiMax delays?

2008-11-25 Thread lakeland
Their tech support is clueless when it comes to the Orthogon Spectras. I have 2 radios that are bad but when we tell them what we have they insist that we must trouble shoot the radio over the phone first. That would be OK except one unit is dead and won't light up and the other unit I keep

[WISPA] Dragonwave 200 Mb FD Link For Sale

2008-11-28 Thread lakeland
I have a Dragonwave 23 GHz Airpair all outdoor link available for sale that is being taken down this week. It is complete with 2' dishes and power supplies. It has been in service for about 1 year without issue. The link is 200 MB full duplex. I believe Dragonwave will supply next day

Re: [WISPA] Trango Apex

2008-11-28 Thread lakeland
That is the way to go. Cheaper at SitePro1.com though. 1-888-GET-PRO-1 Part No. SPA2. About $75. Works fine. Also add 2 pieces of SAM-K (about $30 for the pair) and a piece of 1 1/2 galvanized pipe and you have a tie-back arm for stability. You should be using a tie-back on 3' or larger

Re: [WISPA] Article

2008-12-05 Thread lakeland
Marlon I know you guys out there in the woods are a little behind but a whole day behind!!! Com'on dude. Its the fifth. If you don't change it now you are gonna be late for Christmas and boy is your family gonna be pissed!!! LOL Change the clock on that 486 machine already -B- Sent from my

Re: [WISPA] Do you provide backup services?

2008-12-05 Thread lakeland
Oh please. Mike... you are following both threads and posting it here was consistent with the past exchanges in the other thread. He can't have his cake and eat it too. Sorry Done Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett [EMAIL PROTECTED]

Re: [WISPA] Public ROW

2008-12-05 Thread lakeland
In NY you need to be pretty rich to get pole attachment rights. Last I heard you needed to post a bond as well as have liability for $25 million, name the utilities and govt as additional insureds, pay for a construction audit, undergo engineering review and acceptance, and once you have

Re: [WISPA] tower erection question

2008-12-12 Thread lakeland
$15-18K maybe a little less if you are out in the woods. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: chris cooper ccoo...@intelliwave.com Date: Fri, 12 Dec 2008 11:22:16 To: 'WISPA General List'wireless@wispa.org Subject: [WISPA] tower erection question Ok,

Re: [WISPA] tower erection question

2008-12-14 Thread lakeland
A self supporting tower is more expensive to install sue to base requirements and construction techniques. When I quoted installation pricing I was quoting concrete and steel. I am not talking about zoning, fencing, shelters, or the cost of lighting systems. The number I quoted is foundation

Re: [WISPA] Colored Lanyards

2008-12-16 Thread lakeland
Yeah. Midwest Unlimited Sent from my Verizon Wireless BlackBerry -Original Message- From: Scott Vander Dussen sc...@velociter.net Date: Mon, 15 Dec 2008 20:52:34 To: WISPA General Listwireless@wispa.org Subject: [WISPA] Colored Lanyards I'd like to pick up some new nylon web lanyards

Re: [WISPA] U.S. Adults Choosing Internet Over Sex

2008-12-16 Thread lakeland
Charles Your wife likes it better this way :-) Happy Holidays -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Charles Wu (CTI) c...@cticonnect.com Date: Tue, 16 Dec 2008 00:59:56 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] U.S. Adults Choosing

Re: [WISPA] Anyone do Redline AN80i Repairs?

2008-12-16 Thread lakeland
What is wrong with them? Sent from my Verizon Wireless BlackBerry -Original Message- From: John McDowell j...@boonlink.com Date: Tue, 16 Dec 2008 12:41:28 To: WISPA General Listwireless@wispa.org; Motorola Canopy User Groupmotor...@wispa.org; Principal WISPA Member Listw...@wispa.org

Re: [WISPA] Anyone do Redline AN80i Repairs?

2008-12-16 Thread lakeland
That should have been offlist. Sorry Sent from my Verizon Wireless BlackBerry -Original Message- From: lakel...@gbcx.net Date: Tue, 16 Dec 2008 18:44:07 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Anyone do Redline AN80i Repairs? What is wrong with them? Sent from my

Re: [WISPA] Kernmantle Rope

2008-12-23 Thread lakeland
You are lifting guys with rope and you are looking for the lowest price? You are lifting them with a man rated hoist right? Because it is the only federally approved method regardless of what type of safety backups you put in place. You are leaving yourself and your company really exposed

Re: [WISPA] Multi-Mode Fiber Tools - Source

2008-12-23 Thread lakeland
Unicam. ? Sent from my Verizon Wireless BlackBerry -Original Message- From: Tom DeReggi wirelessn...@rapiddsl.net Date: Tue, 23 Dec 2008 16:55:58 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Multi-Mode Fiber Tools - Source I highly recommend Corning's Ez system. (no

[WISPA] Holidays

2008-12-24 Thread lakeland
Tranzeo, Skypilot, Hutton,. Don't you guys have packages to wrap or something? :-) Happy Holidays Bob Sent from my Verizon Wireless BlackBerry WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Instructions/diagram for framing and pouring concrete pad?

2008-12-29 Thread lakeland
John if all it is supporting is the nema cabinet just frame out the size you want making sure the sidewalls are real strong because you don't want a blowout of the wall. Lay out two levels of No. 4 rebar in a square configuration. Rebar should be minimum of 8 inches from top, bottom and

Re: [WISPA] Instructions/diagram for framing andpouring concretepad?

2008-12-29 Thread lakeland
I agree... Total PITA lining up rod. We use sleeve anchors or threaded rod and Hilti epoxy. Sent from my Verizon Wireless BlackBerry -Original Message- From: Marlon K. Schafer o...@odessaoffice.com Date: Mon, 29 Dec 2008 09:45:02 To: WISPA General Listwireless@wispa.org Subject:

Re: [WISPA] What happened to my RooTenna?

2008-12-29 Thread lakeland
Mac Send me your address offlist and I will send you a handful Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Brian Rohrbacher br...@reliableinter.net Date: Mon, 29 Dec 2008 17:34:15 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] What happened to

Re: [WISPA] concrete cure period

2008-12-30 Thread lakeland
Concrete cures fast. Manufacturer and engineers will tell you 30 days. We have done towers in less than 10. Concrete cures to like 90% of its rated strength in 5 days under normal conditions. If you are pouring in a cold area I would wait -B- Sent from my Verizon Wireless BlackBerry

Re: [WISPA] POE up AM radio tower

2009-01-05 Thread lakeland
The reality on an AM site is that the whole thing is a crap shoot. You could throw up the cheapest crap in the world and it could work fine. Then you throw up the best stuff on the market and you have nothing but headaches. AM sites are really to be avoided even if they are not direct fed. Use

Re: [WISPA] Postage

2009-01-05 Thread lakeland
We would e-mail invoices on the 25th and reminders on the 5th. Then suspend service on the 20th and charge $25 to reconnect. The other option is a payment coupon book. Only need to mail once. You would be surprised how well they work Bob Sent from my Verizon Wireless BlackBerry -Original

Re: [WISPA] POE up AM radio tower

2009-01-05 Thread lakeland
Makes RF interference so much easier too! :-) Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net Date: Mon, 5 Jan 2009 09:06:24 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] POE up AM radio tower I usually know what

Re: [WISPA] Ideas on Police Department Wireless Link from Stationto Cruiser

2009-10-17 Thread lakeland
Be careful of the new federal encryption requirements for anything hooked up to the National Crime Computers. A lot of states have new rules also when interfacing to the state DMV and crime networks Just FYI -B- Sent from my Verizon Wireless BlackBerry -Original Message- From:

Re: [WISPA] Ideas on Police Department Wireless Link from StationtoCruiser

2009-10-17 Thread lakeland
You did not expect me to type all that from a Blackberry did you? LOL Thanks Sent from my Verizon Wireless BlackBerry -Original Message- From: Blake Bowers bbow...@mozarks.com Date: Sat, 17 Oct 2009 12:59:03 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Ideas on Police

Re: [WISPA] Ideas on Police Department Wireless Link from Stationto Cruiser

2009-10-17 Thread lakeland
Yeah. We would dump this right in their lap and outline that the system is strictly for transporting data. Data security is their responsibility. We do the same thing in the banking and health care industry. Sent from my Verizon Wireless BlackBerry -Original Message- From: Robert

Re: [WISPA] Exhalt vs. Moto

2009-10-20 Thread lakeland
Solid reliable radio. We have deployed over 50 links with a few failures early on (first generation) but are solid otherwise And DFS works great. I have not had a DFS hit yet. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Marco Coelho coelh...@gmail.com Date:

Re: [WISPA] OT: Used Tower Pricing.

2009-10-20 Thread lakeland
Maybe $2-2.5K Sent from my Verizon Wireless BlackBerry -Original Message- From: Scottie Arnett sarn...@info-ed.com Date: Tue, 20 Oct 2009 20:24:45 To: wireless@wispa.org Cc: motoro...@wispa.org Subject: [WISPA] OT: Used Tower Pricing. What is a good price to give for a standard Rohn SSV

Re: [WISPA] Identifying 2ft dish frequency

2009-10-21 Thread lakeland
The problems with the Gabriel 2' dual polarity dishes has been fixed. Chances are you only saw these issues because you were not using radomes. The epoxy or whatever sealant they were using at the tip of the feedhorn to hold the end cap on was breaking down and the feedhorn would wick moisture

Re: [WISPA] OT: Used Tower Pricing.

2009-10-22 Thread lakeland
That will not work. Federal banking laws make it illegal to write any other date other tan the present on a bearer instrument That's an uphill battle. Sent from my Verizon Wireless BlackBerry -Original Message- From: Ryan Spott rsp...@cspott.com Date: Thu, 22 Oct 2009 08:34:13 To:

Re: [WISPA] WISPA Webinar Announced

2009-10-23 Thread lakeland
Can I make a recommendation that someone record it and put it in a members only area for review by new members. Great idea getting the manufacturers to present. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Forbes Mercy forbes.me...@wabroadband.com Date: Fri,

Re: [WISPA] WISPA Webinar Announced

2009-10-24 Thread lakeland
I think if the vendor agrees to speak before WISPA then the recording should really be implied. WISPA has all the right in the world to archieve their media and if they are hosting the webinar for the benefit of their members. Now if WISPA wanted to sell the webinar to someone outside the

Re: [WISPA] Link stability

2009-10-26 Thread lakeland
Ok. Weather might be water incursion. CM9 might be PIGTAIL. You didn't say what mfg antenna so its hard to guess. There is always the alignment thing. Did you replace the pigtail after the storm damage? Sent from my Verizon Wireless BlackBerry -Original Message- From: Mark McElvy

Re: [WISPA] Small Managed Switches

2009-11-11 Thread lakeland
I will second the Moxa's. We buy from Neteon out of NJ Sent from my Verizon Wireless BlackBerry -Original Message- From: Jerry Richardson jrichard...@aircloud.com Date: Wed, 11 Nov 2009 15:25:08 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Small Managed Switches

Re: [WISPA] Times Microwave EZ connectors

2009-11-19 Thread lakeland
No 400 connector from any of the manufacturers is weatherproof by itself. You need to weatherproof all of your connections. If they are not getting wet you are lucky. Plain and simple. Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: MDK rea...@muddyfrogwater.us

Re: [WISPA] Dual Pol Grid Parabolic

2009-11-24 Thread lakeland
Radiowaves does I believe Sent from my Verizon Wireless BlackBerry -Original Message- From: MDK rea...@muddyfrogwater.us Date: Tue, 24 Nov 2009 17:26:58 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Dual Pol Grid Parabolic Arc wireless makes 20 and 23 db panels and

Re: [WISPA] Times Microwave EZ connectors

2009-11-24 Thread lakeland
Yeah I left PPC connectors out of the conversation. We used them quite a bit. The ability to keep out water is 100 times better than standard N type LMR400 connectors but I know of sweeoing issues with these from other users. And the cost is a little higher. We still waterproof even when

Re: [WISPA] Fixing buried cable

2009-12-08 Thread lakeland
Tape around the splice, mastic around the tape then 3 more layers of tape. But I would waitfor a nice dry day so there is no moisture to deal with. Just like a transmission line connector Bob Sent from my Verizon Wireless BlackBerry -Original Message- From: Scott Reed

Re: [WISPA] Fixing buried cable

2009-12-08 Thread lakeland
We have those. Use them all the time but I would not bury these. Sent from my Verizon Wireless BlackBerry -Original Message- From: Robert West robert.w...@just-micro.com Date: Tue, 8 Dec 2009 18:19:26 To: 'WISPA General List'wireless@wispa.org Subject: Re: [WISPA] Fixing buried cable

Re: [WISPA] Fixing buried cable

2009-12-08 Thread lakeland
I revise that. Use them and wrap them with tape and mastic. :-) And we use them on Dragonwave and Ceragon installs (100 Mb+) without issue. Sent from my Verizon Wireless BlackBerry -Original Message- From: lakel...@gbcx.net Date: Wed, 9 Dec 2009 00:16:03 To: WISPA General

[WISPA] 2.4 GHz Dual Pol Flat Panel

2009-12-09 Thread lakeland
Need one of these with something 13 dB or higher. Anyone have any leads on such an animal. I needed it yesterday Tnx Bob Sent from my Verizon Wireless BlackBerry WISPA Wants You! Join today!

Re: [WISPA] OT, help with mapping stuff

2009-12-12 Thread lakeland
Is there a versiom of Google maps that is freestanding that can be used on a laptop or PC without an Internet connection? I just need a small region like NYC or Washington DC Metro. Sent from my Verizon Wireless BlackBerry -Original Message- From: Brian Webster

Re: [WISPA] 2010: One Question for WISPs

2010-01-04 Thread lakeland
A Sent from my Verizon Wireless BlackBerry -Original Message- From: Patrick Leary ple...@apertonet.com Date: Mon, 4 Jan 2010 08:47:01 To: WISPA General Listwireless@wispa.org Subject: [WISPA] 2010: One Question for WISPs Happy New Year folks. One simple multiple choice question: For

[WISPA] Two Companies For Sale

2010-01-10 Thread Lakeland
I have nothing to do with these. Just pointing it out if anyone is interested. http://www.bidspotter.com/forms/imagegallery.php?gallery=9185 Bob Moldashel Lakeland Communications, Inc. 1350 Lincoln Avenue Holbrook, NY 11741 800-479-9195 631-286-8873 Fax 516-551-1131 Cell

Re: [WISPA] Anyone ever mount gear on flagpole style tower?

2010-01-12 Thread lakeland
Ok. There is no way to service or install equipment on a stealth pole without a manlift or crane with a basket The pole is a spindle design inside. Picture a solid pipe *axel with two solid round wheels one on each end. Now take the whole assembly and stand it on end. Now stack several of them

Re: [WISPA] Anyone ever mount gear on flagpole style tower?

2010-01-12 Thread lakeland
That's a regular flagpole. When he stated he wanted to mount an antenna and radio INSIDE I assumed he was talking about a cellular flagpole. I stoll assume that. You are never going to climb acell flagpole like in the video. Bob Sent from my Verizon Wireless BlackBerry -Original

[WISPA] Sorry OT

2010-01-12 Thread lakeland
Every day I read, attend webinars and conferences. And do everything I can to keep up with the technology curve. And then something like the movie Avatar comes along and I realize how far behind I really am. Imax 3D and video animation unlike any other. Totally incredible. Go for the reality

Re: [WISPA] 900Mhz sectors

2010-01-14 Thread lakeland
Rick You need to search the model numvers on line and verify polarity. A lot of cell antennas are 45 degree cross pol. So they are not vert or horiz but stock in between. Jumpers for these are easy to find on Ebay. You need DIN male to N male. If 3' jumpers work for you hit me off list. I

Re: [WISPA] stolen solar site

2010-01-18 Thread lakeland
Install eyehooks in each panel and daisey chain a wire through the panels. Connect the cable to a pair of N/C contacts on an ethernet SMS alarm panel. They cut the cable, you grt an alarm. Otherwise find some way to connect them together so its really time consuming or difficult to

Re: [WISPA] stolen solar site

2010-01-18 Thread lakeland
Drag the welder up there. Couple of pieces of 3 x 3 angle and weld the whole mess together to the mounting pipe. Cement the pipe in the ground with 6 bags. They won't be able to carry it. You'll need a grinder to service it or replace the panels Lol Good luck dude. -B- Sent from my

Re: [WISPA] Collections

2010-01-19 Thread lakeland
Can't you just save them all up and go to small claims court? Make one trip and don't share any money with anyone. Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net Date: Tue, 19 Jan 2010 13:29:44 To: wireless@wispa.org Subject:

Re: [WISPA] stolen solar site

2010-01-19 Thread lakeland
Marlon the Pittbull Detective. Go get dude. If you pay for a roundtrip ticket I have a friend come out from Brooklyn! LOL Goog Luck Sent from my Verizon Wireless BlackBerry -Original Message- From: Marlon K. Schafer o...@odessaoffice.com Date: Tue, 19 Jan 2010 11:43:32 To:

Re: [WISPA] Collections

2010-01-19 Thread lakeland
Understood I collect about 90% of my money without even getting in the court house. Just go there, fill out forms and then wait for the phone to ring. Good luck getting them -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net

Re: [WISPA] Spectrum Analyzer Recommendation?

2010-01-22 Thread lakeland
Well. as a guy that uses this equipment every day I can verify that a large amount of individuals with titles and letters after their names don't have a clue. :-) Not all...just a good quantity of them -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Blake

Re: [WISPA] Side Mount to Wooden Utility Pole?

2010-01-25 Thread lakeland
Get some conduit straps and screw them into the pole Sent from my Verizon Wireless BlackBerry -Original Message- From: AJ aj.grant...@gmail.com Date: Mon, 25 Jan 2010 11:10:10 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Side Mount to Wooden Utility Pole? I kinda ruled

Re: [WISPA] Grain leg safety cage (was Re: Tower accident)

2009-01-07 Thread lakeland
Don't worry. If you fall the chances are very good that an extremity will get jammed into the ladder and you will be all nice and rolled up in a ball wedged between the cage and the ladder. And the extremity that is now broken in 10 pieces will be above where you are so the rescuers will need

Re: [WISPA] City School Internet Bid...need help and advice from thosewho've done this.

2009-01-07 Thread lakeland
John This is obviously a fiber bid. To get 1 Gb connectivity all the buildings need to be a mile or less apart ideally. If they are more than that then you are pretty much out of luck. Yeah yeah 80 GHz will do up to 2 miles but I prefer the uptime. The fiber company will need to trebch to

Re: [WISPA] Colocation on Cell Towers

2009-01-07 Thread lakeland
Where Sent from my Verizon Wireless BlackBerry -Original Message- From: Chuck Hogg ch...@avolutia.com Date: Wed, 7 Jan 2009 16:16:20 To: WISPA General Listwireless@wispa.org Subject: [WISPA] Colocation on Cell Towers Does anyone have good contacts for colocation on Cell Towers?

Re: [WISPA] City School Internet Bid...need help and advice fromthosewho've done this.

2009-01-07 Thread lakeland
I meant considerably lower.. AUGH Sent from my Verizon Wireless BlackBerry -Original Message- From: lakel...@gbcx.net Date: Wed, 7 Jan 2009 22:45:40 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] City School Internet Bid...need help and advice from thosewho've

Re: [WISPA] metal building install

2009-01-07 Thread lakeland
Sherwin Williams DTM (Direct to Metal) will not attenuate your signal Sent from my Verizon Wireless BlackBerry -Original Message- From: Jim Patient sa...@jeffcosoho.com Date: Wed, 07 Jan 2009 17:26:08 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] metal building install

Re: [WISPA] Tower accident

2009-01-08 Thread lakeland
Definately Midwest Unlimited. Buy from a company in the tower business. Sent from my Verizon Wireless BlackBerry -Original Message- From: Steve Barnes st...@pcswin.com Date: Thu, 8 Jan 2009 13:43:37 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Tower accident That's

[WISPA] Billboard Contact Info

2009-01-18 Thread lakeland
For anyone who is interested: Clear Channel Communications Jim Ajaeb 888-551-7483 tow...@clearchannel.com www.towers.clearchannel.com Bob Sent from my Verizon Wireless BlackBerry WISPA Wants You! Join today!

Re: [WISPA] Ceragon, Dragonwave and whatelse?

2009-01-19 Thread lakeland
I believe (but not sure) Ceragon was the first with a DPRM mount. But agree with everything else :-) Sent from my Verizon Wireless BlackBerry -Original Message- From: Tom DeReggi wirelessn...@rapiddsl.net Date: Mon, 19 Jan 2009 12:32:12 To: WISPA General Listwireless@wispa.org

Re: [WISPA] Additional New Member Overlooked

2009-01-19 Thread lakeland
Or shame them in to joining. Whatever works. LOL Sent from my Verizon Wireless BlackBerry -Original Message- From: Rick Harnish rharn...@greatamericanbroadband.com Date: Mon, 19 Jan 2009 15:46:33 To: 'WISPA General List'wireless@wispa.org Subject: Re: [WISPA] Additional New Member

Re: [WISPA] 24 GHz

2009-01-29 Thread lakeland
The Snaplink is a wifi style radiom. 54 Mb devided by 2 and subtract 10 percent or 22 Mb. Dragonwave is true full duplex Sent from my Verizon Wireless BlackBerry -Original Message- From: 3-dB Networks wi...@3-db.net Date: Thu, 29 Jan 2009 20:58:39 To: 'WISPA General

Re: [WISPA] 4.7 GHz

2009-02-03 Thread lakeland
4.5 to 4.9 is federal govt in US Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net Date: Tue, 3 Feb 2009 09:18:05 To: WISPA General Listwireless@wispa.org Subject: [WISPA] 4.7 GHz Has anyone heard anything about the 4.7 (4.4 - 5.0)

[WISPA] HP/Lenovo Netbook

2009-02-06 Thread lakeland
Anyone using one of these? Would love to hear pros and cons Tnx Bob Sent from my Verizon Wireless BlackBerry WISPA Wants You! Join today! http://signup.wispa.org/

  1   2   3   4   >