RE: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
You might want to check out til-tek and antel. They are not cheap, but they are highh quality. c -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Joshua M. AndrewsSent: Tuesday, September 26, 2006 9:37 PMTo: wireless@wispa.orgSubject: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
Inside dimensions: 16.25 x 14.75 x 1 It's enough to put in a board with stansdoffs but not much more. From: Scott Reed Sent: Tuesday, September 26, 2006 7:30 PM To: WISPA General List Subject: Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? I know someone that has a 900MHz Rootenna. Disappointed that they are only about 1 deep inside. RB112 is just under 1-1/4. He made it fit, but not happy about the way it went together. -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
$300 is pretty cheap for a good quality 900 mhz omni. And remember to watch the shipping costs on them. The higher gain units are 10+ feet long. Marlon(509) 982-2181 Equipment sales(408) 907-6910 (Vonage) Consulting services42846865 (icq) And I run my own wisp!64.146.146.12 (net meeting)www.odessaoffice.com/wirelesswww.odessaoffice.com/marlon/cam - Original Message - From: Joshua M. Andrews To: wireless@wispa.org Sent: Tuesday, September 26, 2006 6:37 PM Subject: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com -- WISPA Wireless List: wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
I have measured several RB112s and they are all 1-1/4 thick from the mPCI on the back to the top of the capacitors. You may want to check your RB112s before choosing the Rootenna. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: Frank [EMAIL PROTECTED] To: 'WISPA General List' wireless@wispa.org Sent: Wed, 27 Sep 2006 08:30:40 -0700 Subject: RE: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? Inside dimensions: 16.25 x 14.75 x 1 It's enough to put in a board with stansdoffs but not much more. From: Scott Reed Sent: Tuesday, September 26, 2006 7:30 PM To: WISPA General List Subject: Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? I know someone that has a 900MHz Rootenna. Disappointed that they are only about 1 deep inside. RB112 is just under 1-1/4. He made it fit, but not happy about the way it went together. -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ --- End of Original Message --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] 900 MHz Omni-Directional Antennas PRICE!?
Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
$300 is the going rate I've seen for vertical. I've seen prices of $1200 for horizontal. http://www.pacwireless.com/products/ODH9-9.shtml http://www.pacwireless.com/products/omni_900mhz.shtml Brian Joshua M. Andrews wrote: Hello all, I’m planning on purchasing some test equipment designed around the SR9 900 MHz equipment. I’m debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omni’s but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
Well, I'm deploying SR9's with MikroTik next week. Can't beat the RB112's for price. Put them in the Pac-wireless NEMA boxes for clients with yagis and hoping to see the 900 MHz Rootennas soon We will be using RB532A's for our AP's. I'm planning on using Netstream with polling for our setup. Also considering cavity filters on the AP's. After testing, we are going H-pol only on 900 MHz. Better range and lower noise floor... 900 MHz H-pol omnis are $800+!! Waiting on a friend to send me some 900 MHz panels for testing Soon, I hope Looking at a trick to use two 60deg Hpol panels together, but have to wait for them to get here Joshua M. Andrews wrote: Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
Also check with http://www.superpass.com You have a Good Day now, Carl A Jeptha http://www.airnet.ca Office Phone: 905 349-2084 Office Hours: 9:00am - 5:00pm skype cajeptha Blair Davis wrote: Well, I'm deploying SR9's with MikroTik next week. Can't beat the RB112's for price. Put them in the Pac-wireless NEMA boxes for clients with yagis and hoping to see the 900 MHz Rootennas soon We will be using RB532A's for our AP's. I'm planning on using Netstream with polling for our setup. Also considering cavity filters on the AP's. After testing, we are going H-pol only on 900 MHz. Better range and lower noise floor... 900 MHz H-pol omnis are $800+!! Waiting on a friend to send me some 900 MHz panels for testing Soon, I hope Looking at a trick to use two 60deg Hpol panels together, but have to wait for them to get here Joshua M. Andrews wrote: Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
I know someone that has a 900MHz Rootenna. Disappointed that they are only about 1 deep inside. RB112 is just under 1-1/4. He made it fit, but not happy about the way it went together. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Tue, 26 Sep 2006 21:54:37 -0400 Subject: Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? Well, I'm deploying SR9's with MikroTik next week. Can't beat the RB112's for price. Put them in the Pac-wireless NEMA boxes for clients with yagis and hoping to see the 900 MHz Rootennas soon We will be using RB532A's for our AP's. I'm planning on using Netstream with polling for our setup. Also considering cavity filters on the AP's. After testing, we are going H-pol only on 900 MHz. Better range and lower noise floor... 900 MHz H-pol omnis are $800+!! Waiting on a friend to send me some 900 MHz panels for testing Soon, I hope Looking at a trick to use two 60deg Hpol panels together, but have to wait for them to get here Joshua M. Andrews wrote: Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006 --- End of Original Message --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
If they are only one inch deep, they will be close to useless. Scott Reed wrote: I know someone that has a 900MHz Rootenna. Disappointed that they are only about 1" deep inside. RB112 is just under 1-1/4". He made it fit, but not happy about the way it went together. Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- Original Message --- From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Tue, 26 Sep 2006 21:54:37 -0400 Subject: Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? Well, I'm deploying SR9's with MikroTik next week. Can't beat the RB112's for price. Put them in the Pac-wireless NEMA boxes for clients with yagis and hoping to see the 900 MHz Rootennas soon We will be using RB532A's for our AP's. I'm planning on using Netstream with polling for our setup. Also considering cavity filters on the AP's. After testing, we are going H-pol only on 900 MHz. Better range and lower noise floor... 900 MHz H-pol omnis are $800+!! Waiting on a friend to send me some 900 MHz panels for testing Soon, I hope Looking at a trick to use two 60deg Hpol panels together, but have to wait for them to get here Joshua M. Andrews wrote: Hello all, Im planning on purchasing some test equipment designed around the SR9 900 MHz equipment. Im debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omnis but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006 --- End of Original Message --- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900 MHz Omni-Directional Antennas PRICE!?
I got spam from Tranzeo today informing me of some omni 900's for under 100 bux. +++ neofast.net - fast internet for North East Oregon and South East Washington email me at mark at neofast dot net 541-969-8200 Direct commercial inquiries to purchasing at neofast dot net - Original Message - From: Joshua M. Andrews [EMAIL PROTECTED] To: wireless@wispa.org Sent: Tuesday, September 26, 2006 6:37 PM Subject: [WISPA] 900 MHz Omni-Directional Antennas PRICE!? Hello all, I'm planning on purchasing some test equipment designed around the SR9 900 MHz equipment. I'm debating between MikroTik and WRAP boards at the moment and have found an outdoor enclosure that should work fine. However, the big question is what antennas to use for both the AP and the CPE. I found some sites that offer 900 MHz Omni's but the prices are CRAZY! Into the $300 range! As for a client side it seems to be a little more realistic of around $20 up to the hundreds of dollars depending on the type needed. Am I crazy or am I destined to pay about $300 for an Omni-directional antenna!? Also, if anybody has any EXACT configurations they would like to recommend for my first SR9 AP and CPE setup please feel free to post the details of you recommended configurations! Thanks! Sincerely, Joshua M. Andrews www.QCSitter.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
