Re: [WISPA] Moto BH Reset to Default
I have had Cacti cause changed to some of my switches and to an couple of APs before. I also had an SM that ants infected and caused a short across the timing port causing the SM to reset itself. This is one of the hazards of putting SMs 100+ feet up trees. On 09/09/2010 09:59 AM, Forbes Mercy wrote: Many thanks, I'll do that. Forbes On 9/9/2010 9:49 AM, Patrick Shoemaker wrote: I would make sure that the SNMP community string is set to something other than default, and disable write access if you're not using that functionality. I forget if it's enabled by default, but I think it is for Prizm. Also, might want to upgrade that software? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/9/2010 11:31 AM, Forbes Mercy wrote: Patrick, This unit has run seamlessly for over 5 years then dumped to default twice in a day. I changed passwords again the second time and it hasn't happened yet, but that was just yesterday. We had other network issues at the same time that may have contributed. When we've had other issues we lost the two other Moto backhauls as well, the hazard of bridged networking. Thanks, Forbes On 9/9/2010 7:15 AM, Patrick Shoemaker wrote: I don't see much of anything useful in there. Is there anything in common with the ones that have lost their config? Same site, same power supply, same manufacturing batch, etc? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 10:22 PM, Forbes Mercy wrote: Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES
Re: [WISPA] Moto BH Reset to Default
I don't see much of anything useful in there. Is there anything in common with the ones that have lost their config? Same site, same power supply, same manufacturing batch, etc? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 10:22 PM, Forbes Mercy wrote: Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 18:45:04 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:43 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 27 Max ExtInt 601 Cur DecInt 52 Max DecInt 176 Cur Sync 0 Max Sync 34 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 4 Max FEC 267 Cur FPGA 23 Max FPGA 405 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 18:56:40 UT : 09/08/10 : File root.c : Line 874 **System Startup** 18:56:41 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 18:56:41 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 18:56:41 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 18:56:41 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 20:58:19 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 20:55:42 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 20:55:42 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception
Re: [WISPA] Moto BH Reset to Default
Patrick, This unit has run seamlessly for over 5 years then dumped to default twice in a day. I changed passwords again the second time and it hasn't happened yet, but that was just yesterday. We had other network issues at the same time that may have contributed. When we've had other issues we lost the two other Moto backhauls as well, the hazard of bridged networking. Thanks, Forbes On 9/9/2010 7:15 AM, Patrick Shoemaker wrote: I don't see much of anything useful in there. Is there anything in common with the ones that have lost their config? Same site, same power supply, same manufacturing batch, etc? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 10:22 PM, Forbes Mercy wrote: Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 18:45:04 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:43 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 27 Max ExtInt 601 Cur DecInt 52 Max DecInt 176 Cur Sync 0 Max Sync 34 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 4 Max FEC 267 Cur FPGA 23 Max FPGA 405 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 18:56:40 UT : 09/08/10 : File root.c : Line 874 **System Startup** 18:56:41 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 18:56:41 UT : 09/08/10 : File root.c : Line 883 Software Boot Version
Re: [WISPA] Moto BH Reset to Default
Are the passwords sent in the clear? Could one of your clients be sniffing your traffic? Greg On Sep 9, 2010, at 11:01 AM, Forbes Mercy wrote: Patrick, This unit has run seamlessly for over 5 years then dumped to default twice in a day. I changed passwords again the second time and it hasn't happened yet, but that was just yesterday. We had other network issues at the same time that may have contributed. When we've had other issues we lost the two other Moto backhauls as well, the hazard of bridged networking. Thanks, Forbes On 9/9/2010 7:15 AM, Patrick Shoemaker wrote: I don't see much of anything useful in there. Is there anything in common with the ones that have lost their config? Same site, same power supply, same manufacturing batch, etc? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 10:22 PM, Forbes Mercy wrote: Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 18:45:04 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:43 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 27 Max ExtInt 601 Cur DecInt 52 Max DecInt 176 Cur Sync 0 Max Sync 34 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 4 Max FEC 267 Cur FPGA 23 Max FPGA 405 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 18:56:40 UT : 09/08/10 : File root.c : Line 874 **System Startup** 18:56:41 UT :
Re: [WISPA] Moto BH Reset to Default
I would make sure that the SNMP community string is set to something other than default, and disable write access if you're not using that functionality. I forget if it's enabled by default, but I think it is for Prizm. Also, might want to upgrade that software? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/9/2010 11:31 AM, Forbes Mercy wrote: Patrick, This unit has run seamlessly for over 5 years then dumped to default twice in a day. I changed passwords again the second time and it hasn't happened yet, but that was just yesterday. We had other network issues at the same time that may have contributed. When we've had other issues we lost the two other Moto backhauls as well, the hazard of bridged networking. Thanks, Forbes On 9/9/2010 7:15 AM, Patrick Shoemaker wrote: I don't see much of anything useful in there. Is there anything in common with the ones that have lost their config? Same site, same power supply, same manufacturing batch, etc? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 10:22 PM, Forbes Mercy wrote: Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 18:45:04 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:43 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 27 Max
Re: [WISPA] Moto BH Reset to Default
Many thanks, I'll do that. Forbes On 9/9/2010 9:49 AM, Patrick Shoemaker wrote: I would make sure that the SNMP community string is set to something other than default, and disable write access if you're not using that functionality. I forget if it's enabled by default, but I think it is for Prizm. Also, might want to upgrade that software? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/9/2010 11:31 AM, Forbes Mercy wrote: Patrick, This unit has run seamlessly for over 5 years then dumped to default twice in a day. I changed passwords again the second time and it hasn't happened yet, but that was just yesterday. We had other network issues at the same time that may have contributed. When we've had other issues we lost the two other Moto backhauls as well, the hazard of bridged networking. Thanks, Forbes On 9/9/2010 7:15 AM, Patrick Shoemaker wrote: I don't see much of anything useful in there. Is there anything in common with the ones that have lost their config? Same site, same power supply, same manufacturing batch, etc? Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 10:22 PM, Forbes Mercy wrote: Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 18:45:04 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:43 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:40 UT : 09/08/10 : File
[WISPA] Moto BH Reset to Default
This is the third Motorola backhaul where the remote end reset it's settings to default. I've changed passwords and it did it again within an hour of leaving. Any ideas? Thanks, Forbes Mercy Washington Broadband, Inc. forbes.me...@wabroadband.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
First it would help to know what model BH you have. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 6:08 PM, Forbes Mercy wrote: This is the third Motorola backhaul where the remote end reset it's settings to default. I've changed passwords and it did it again within an hour of leaving. Any ideas? Thanks, Forbes Mercy Washington Broadband, Inc. forbes.me...@wabroadband.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
It's all the same hardware isn't it? On Sep 8, 2010 7:53 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: First it would help to know what model BH you have. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 6:08 PM, Forbes Mercy wrote: This is the third Motorola backhaul where the remote en... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
PTP400/500/800 is a completely different platform than PTP100/200. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 8:06 PM, Josh Luthman wrote: It's all the same hardware isn't it? On Sep 8, 2010 7:53 PM, Patrick Shoemaker shoemak...@vectordatasystems.com mailto:shoemak...@vectordatasystems.com wrote: First it would help to know what model BH you have. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com mailto:shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 6:08 PM, Forbes Mercy wrote: This is the third Motorola backhaul where the remote en... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
The subject says BH as in BH10 or BH20... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Sep 8, 2010 at 8:09 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: PTP400/500/800 is a completely different platform than PTP100/200. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 8:06 PM, Josh Luthman wrote: It's all the same hardware isn't it? On Sep 8, 2010 7:53 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: First it would help to know what model BH you have. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 6:08 PM, Forbes Mercy wrote: This is the third Motorola backhaul where the remote en... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
Okay, if it is the PTP100/200 series, is the event log being preserved after the reset to defaults? Did you change just the user passwords or did you change the SNMP community string as well? Do you have anything plugged in to the timing port? What is the setting for the default plug action set to- reset to defaults or just bypass user login? If PTP400/500/600 series, the reset signal is sent over the power conductors feeding the ODU. It's feasible that a cable or PIDU problem could cause erroneous resets. But the same cable or PIDU problem on three separate radios would be unlikely. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 8:44 PM, Josh Luthman wrote: The subject says BH as in BH10 or BH20... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Sep 8, 2010 at 8:09 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: PTP400/500/800 is a completely different platform than PTP100/200. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 8:06 PM, Josh Luthman wrote: It's all the same hardware isn't it? On Sep 8, 2010 7:53 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: First it would help to know what model BH you have. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 6:08 PM, Forbes Mercy wrote: This is the third Motorola backhaul where the remote en... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
Come to think of it PDMNet has mentioned they've seen many cases where the hardware thinks it has something on the reset (not sure of the details). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Sep 8, 2010 at 8:56 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: Okay, if it is the PTP100/200 series, is the event log being preserved after the reset to defaults? Did you change just the user passwords or did you change the SNMP community string as well? Do you have anything plugged in to the timing port? What is the setting for the default plug action set to- reset to defaults or just bypass user login? If PTP400/500/600 series, the reset signal is sent over the power conductors feeding the ODU. It's feasible that a cable or PIDU problem could cause erroneous resets. But the same cable or PIDU problem on three separate radios would be unlikely. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 8:44 PM, Josh Luthman wrote: The subject says BH as in BH10 or BH20... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Sep 8, 2010 at 8:09 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: PTP400/500/800 is a completely different platform than PTP100/200. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 8:06 PM, Josh Luthman wrote: It's all the same hardware isn't it? On Sep 8, 2010 7:53 PM, Patrick Shoemaker shoemak...@vectordatasystems.com wrote: First it would help to know what model BH you have. Patrick Shoemaker Vector Data Systems LLC shoemak...@vectordatasystems.com office: (301) 358-1690 x36 http://www.vectordatasystems.com On 9/8/2010 6:08 PM, Forbes Mercy wrote: This is the third Motorola backhaul where the remote en... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Moto BH Reset to Default
Patrick this is today's event log, no there's no sync, does this help?: 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 03:30:18 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 17:47:59 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 99 Max ExtInt 717 Cur DecInt 68 Max DecInt 180 Cur Sync 0 Max Sync 47 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 6 Max FEC 328 Cur FPGA 93 Max FPGA 488 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 17:47:59 UT : 09/08/10 : File root.c : Line 874 **System Startup** 17:48:00 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 17:48:00 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 17:48:00 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 17:48:00 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:00:00 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset 00:00:00 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:00:01 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:00:01 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:00:01 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:00:01 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 00:13:50 UT : 01/01/00 : File httptask.c : Line 616 Reboot from Webpage. 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 00:10:34 UT : 01/01/00 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 66 Cur DecInt 60 Max DecInt 178 Cur Sync 0 Max Sync 65 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 60 Cur FPGA 0 Max FPGA 61 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 00:10:34 UT : 01/01/00 : File root.c : Line 874 **System Startup** 00:10:35 UT : 01/01/00 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 00:10:35 UT : 01/01/00 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 00:10:35 UT : 01/01/00 : File root.c : Line 887 FPGA Version : 06240318 00:10:35 UT : 01/01/00 : File root.c : Line 891 FPGA Features : DES 18:45:04 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:43 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 18:56:40 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 27 Max ExtInt 601 Cur DecInt 52 Max DecInt 176 Cur Sync 0 Max Sync 34 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 4 Max FEC 267 Cur FPGA 23 Max FPGA 405 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 18:56:40 UT : 09/08/10 : File root.c : Line 874 **System Startup** 18:56:41 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16 2004 15:23:05 BH-DES 18:56:41 UT : 09/08/10 : File root.c : Line 883 Software Boot Version : CANOPYBOOT 1.0 18:56:41 UT : 09/08/10 : File root.c : Line 887 FPGA Version : 06240318 18:56:41 UT : 09/08/10 : File root.c : Line 891 FPGA Features : DES 20:58:19 UT : 09/08/10 : File httptask.c : Line 616 Reboot from Webpage. 20:55:42 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 1055 Time set 20:55:42 UT : 09/08/10 : File C:/ISIPPC/pssppc.250/bsps/devices/whisp/syslog.c : Line 914 System Reset Exception -- External Hard Reset WatchDog Cur ExtInt 0 Max ExtInt 81 Cur DecInt 52 Max DecInt 176 Cur Sync 0 Max Sync 68 Cur LED 0 Max LED 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 53 Cur FPGA 0 Max FPGA 64 Cur FrmLoc 0 Max FrmLoc 0 AAState 0 20:55:42 UT : 09/08/10 : File root.c : Line 874 **System Startup** 20:55:43 UT : 09/08/10 : File root.c : Line 879 Software Version : CANOPY4.2.1 Apr 16