Of Mac Dearman
Sent: 17 February 2006 04:42
To: WISPA General List
Subject: Re: [WISPA] omni tower separation
I to can kick in some experience here! I mounted an omni one time on top of
a building on a tripod. I shoved the Omni as high as I could reach to push
it up(hehehehe not to high
Is 6 inches enough separation with a 9db omni from a 25g
tower?, Ive done it with 12 before and I had no problems, just wondering
what 6 would do.
Kurt Fankhauser
WAVELINC
114 S. Walnut St.
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
--
WISPA Wireless List:
I've always been taught that 18" is the
minimum.
marlon
- Original Message -
From:
Kurt
Fankhauser
To: wireless@wispa.org
Sent: Thursday, February 16, 2006 10:12
AM
Subject: [WISPA] omni tower
separation
Is 6 inches enough separation with
is the minimum.
marlon
- Original Message -
*From:* Kurt Fankhauser mailto:[EMAIL PROTECTED]
*To:* wireless@wispa.org mailto:wireless@wispa.org
*Sent:* Thursday, February 16, 2006 10:12 AM
*Subject:* [WISPA] omni tower separation
Is 6 inches enough separation with a 9db omni
PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Thursday, February 16, 2006 7:47 PM
Subject: Re: [WISPA] omni tower separation
actually, at 900 mhz, 36 is preferred.
On one tower, with trango, using an OD9-11 (11 dbi vert omni), I saw 8-10
db improvements in my customer connections
: Rick Smith [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Thursday, February 16, 2006 7:47 PM
Subject: Re: [WISPA] omni tower separation
actually, at 900 mhz, 36 is preferred.
On one tower, with trango, using an OD9-11 (11 dbi vert omni), I saw 8-10
db improvements in my
, February 16, 2006 8:42 PM
Subject: Re: [WISPA] omni tower separation
I can tell you from experience, mounting it at 6 inches is not a good idea.
We did that once, in a rush job, when the climbers were there and mounting
hardware was not. Definate holes in coverage were identified after the
fact
