Re: [WISPA] Quick-Connect PoE at CPE
Used one of these quick-connect pigtails today on a Tranzeo installation. Had to bore the hole out on the waterproof boot to 7/8 (I expected this), and it worked like a charm. A nice, unexpected bonus is that the cable on this pigtail is less stiff than the outdoor cable I use, so it bends, stuffs into the boot and slips into the RJ45 jack on the CPE much better than the other cable. On the down-side of this install, I left my tool belt somewhere prior to this afternoon and had to get by with other tools in the truck. Slow-going when you have to work out of your element. :( Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: George Rogato [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Sunday, December 31, 2006 3:09 PM Subject: Re: [WISPA] Quick-Connect PoE at CPE Pac Wireless makes them: http://pacwireless.com/products/RJ45-ECS.shtml Mark Nash wrote: George, awhile back I got from you a cat5 pigtail that had a quick-connect fitting on it. I think I can use these for my Tranzeo CPEs if I bore out the hole in the boot of the CPE. This could speed up installs some troubleshooting as well, as we can disconnect the customer's PoE cable and plug into it directly from the inverter in my truck without taking off the boot and risking water problems. How to you obtain these? and do you put on the pigtail portion of it or do they come terminated? What are others doing for this? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Quick-Connect PoE at CPE
Pac Wireless makes them: http://pacwireless.com/products/RJ45-ECS.shtml Mark Nash wrote: George, awhile back I got from you a cat5 pigtail that had a quick-connect fitting on it. I think I can use these for my Tranzeo CPEs if I bore out the hole in the boot of the CPE. This could speed up installs some troubleshooting as well, as we can disconnect the customer's PoE cable and plug into it directly from the inverter in my truck without taking off the boot and risking water problems. How to you obtain these? and do you put on the pigtail portion of it or do they come terminated? What are others doing for this? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Quick-Connect PoE at CPE
Cool...just ordered some from Streakwave $5.95 each. Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: George Rogato [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Sunday, December 31, 2006 3:09 PM Subject: Re: [WISPA] Quick-Connect PoE at CPE Pac Wireless makes them: http://pacwireless.com/products/RJ45-ECS.shtml Mark Nash wrote: George, awhile back I got from you a cat5 pigtail that had a quick-connect fitting on it. I think I can use these for my Tranzeo CPEs if I bore out the hole in the boot of the CPE. This could speed up installs some troubleshooting as well, as we can disconnect the customer's PoE cable and plug into it directly from the inverter in my truck without taking off the boot and risking water problems. How to you obtain these? and do you put on the pigtail portion of it or do they come terminated? What are others doing for this? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Quick-Connect PoE at CPE
Don't the tranzeo's already come with some kind of external quick connect? Mark Nash wrote: Cool...just ordered some from Streakwave $5.95 each. Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: George Rogato [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Sunday, December 31, 2006 3:09 PM Subject: Re: [WISPA] Quick-Connect PoE at CPE Pac Wireless makes them: http://pacwireless.com/products/RJ45-ECS.shtml Mark Nash wrote: George, awhile back I got from you a cat5 pigtail that had a quick-connect fitting on it. I think I can use these for my Tranzeo CPEs if I bore out the hole in the boot of the CPE. This could speed up installs some troubleshooting as well, as we can disconnect the customer's PoE cable and plug into it directly from the inverter in my truck without taking off the boot and risking water problems. How to you obtain these? and do you put on the pigtail portion of it or do they come terminated? What are others doing for this? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Quick-Connect PoE at CPE
It's not a quick-connect...just a pass-through. If you want access to the RJ45 jack on the CPE, you've got to take the whole weatherproof boot off. That makes a big difference as to what I'm wanting to do. With the quick-connect pigtail, CPEs can be assembled, terminated and configured in the shop prior to installation in the field. When our install tech goes out, he will test the CPE with a test cable (running off the inverter in the truck) just by aiming the CPE by hand. The Tranzeo has 5 signal strength LEDs on the back of it. If a location is chosen, it still needs to wrenched down on a mount for the one installer to be able to do further testing. Prior to having these, the installer would have to either put a boot on with the test cable, or risk water damage to the CPE during testing. So WITH these, on-premises testing and installation can occur in a weatherproof environment. Also, it's very handy for an on-site tech to be able to plug into the CPE when on a service call. All testing/realignment/etc can be done without the customer being present. Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: George Rogato [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Sunday, December 31, 2006 3:27 PM Subject: Re: [WISPA] Quick-Connect PoE at CPE Don't the tranzeo's already come with some kind of external quick connect? Mark Nash wrote: Cool...just ordered some from Streakwave $5.95 each. Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: George Rogato [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Sunday, December 31, 2006 3:09 PM Subject: Re: [WISPA] Quick-Connect PoE at CPE Pac Wireless makes them: http://pacwireless.com/products/RJ45-ECS.shtml Mark Nash wrote: George, awhile back I got from you a cat5 pigtail that had a quick-connect fitting on it. I think I can use these for my Tranzeo CPEs if I bore out the hole in the boot of the CPE. This could speed up installs some troubleshooting as well, as we can disconnect the customer's PoE cable and plug into it directly from the inverter in my truck without taking off the boot and risking water problems. How to you obtain these? and do you put on the pigtail portion of it or do they come terminated? What are others doing for this? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/