Nope. Needs a new radio.
marlon
-Original Message-
From: Matt Hoppes
Sent: Friday, October 18, 2013 5:15 AM
To: WISPA General List
Cc: WISPA General List
Subject: Re: [WISPA] Ubiquiti radios failing?
Does the signal come back if you just reboot the radio?
On Oct 18, 2013, at 8:06
.
>
> We spot the bad ones when there is a 10 to 20 dB difference between tx and
> rx signal levels showing in the registration (or other) window.
>
> marlon
>
>
> -Original Message-
> From: Scott Reed
> Sent: Friday, October 18, 2013 3:17 AM
> To: WISPA
arlon
-Original Message-
From: Scott Reed
Sent: Friday, October 18, 2013 3:17 AM
To: WISPA General List
Subject: Re: [WISPA] Ubiquiti radios failing?
Grounding or water ingress.
We have 100s of XR cards, both 900Mhxz, 2ghz and 5ghz in the air. I
can't remember the last time we replaced a fail
Grounding or water ingress.
We have 100s of XR cards, both 900Mhxz, 2ghz and 5ghz in the air. I
can't remember the last time we replaced a failed XR card that was
actually bad that was not for water in the cable.
On 10/17/2013 11:48 AM, Marlon Schafer (509.982.2181) wrote:
> I see that a lot on
I see that a lot on the XR cards after storms in my area. Might be bad TX
output or bad RX input numbers. I've changed a lot of cards this year
because of a similar issue to yours.
marlon
-Original Message-
From: Paolo Di Francesco
Sent: Tuesday, October 15, 2013 10:54 AM
To: wireles
I've seen this issue with xr-2 mPCI cards, f.20 mPCI cards and others.
Don't really think it is a UBNT only issue.
I think it is just one of the failure modes of the Atheros chipset.
--
On 10/16/2013 3:00 AM, Paolo Di Francesco wrote:
> Hi Jason
>
> well it looks like Ubiquiti is failing aga
Hi Jason
well it looks like Ubiquiti is failing again. Our first surprise was the
cable around 1-2 year ago (we had to replace something like 20 reels of
cable) and now we have to replace units.
As far as I know there is no mailing list to read something like "yes we
have a problem on these un
on both sides we have ubiquiti
we have various scenarios: ptp or ptmp
example1: airgridm5 connected to rocketM5 access point, we saw that it
went down 10db
example2: airgridm5 not even connecting to the rocket (smoked radio? but
it was new out of the box), on the same customers we put a mikrot
Do a little searching on the UBNT forums. There were a few batches of the
AirGrid HP's that had this issue. I installed about ten of them. I then
replaced 10 of them with grid/bullets and scrapped them.
On Tuesday, October 15, 2013 1:55 PM, Paolo Di Francesco
wrote:
dear all
lately we are
Are these PTP, or connected to one particular AP? What type of AP?
On 10/15/2013 11:54 AM, Paolo Di Francesco wrote:
> dear all
>
> lately we are having some strange issues with some airgrids. We see that:
>
> 1) the signal on some radios is droppiing around 10dbi
> 2) it works in one direction
10 matches
Mail list logo
