Re: [Wireshark-dev] QCustomPlot 2.0.0
Hi, Qcustomplot 2.0.1 is out and it may have addressed some of the problems Roland saw https://www.qcustomplot.com/release/2.0.1/changelog.txt ( - added missing Q_DECL_OVERRIDE declarations, thus preventing warnings some compiler settings) It looks to me like requiring Qt >= 5.10 is not realistic as this time ( Ubuntu 18.04 has 5.9 ) so moving to Qt Charts is not possible yet?) So it seems like it would be a good thing to move to Qcustomplot 2.0.1. It would be good if someone who knows what they are doing took a look https://code.wireshark.org/review/#/c/17980/ Best regards Andes From: Wireshark-dev On Behalf Of Alexis La Goutte Sent: den 10 februari 2018 17:01 To: Developer support list for Wireshark Subject: Re: [Wireshark-dev] QCustomPlot 2.0.0 Qt Charts look nice (and it look available from Qt 5.6...) Not really time for the moment to try to finish the port to qcustomsplot and we have already try to push some patch on upstream but it is very long ! On Sat, Feb 10, 2018 at 3:03 PM, Roland Knall mailto:rkn...@gmail.com> > wrote: ;-) My main concern though will be performance. We have to figure out, if QCustomPlot or Qt Charts is better in regards to performance, some initial tests do not show a clear winner, but all in due time. My main concern is just, that we cannot integrate QCustomPlot 2.0 without modifications. cheers Roland On Sat, Feb 10, 2018 at 12:52 PM, Martin Mathieson via Wireshark-dev mailto:wireshark-dev@wireshark.org> > wrote: Given how good the Qt Charts screenshots look, and how unimportant the change to control the ticks on my axis is to me, I will leave this. Martin On Sat, Feb 10, 2018 at 10:42 AM, Roland Knall mailto:rkn...@gmail.com> > wrote: I've tried to port Alexis patch to the current master and use QCustomPlot 2.0.0 final with it. Ran into quite a few issues, mostly virtual methods not properly marked for override. This leads to a compilation dropout with -Werror. So, the question I am having is, is it worth implementing QCustomPlot 2.0.0 with all necessary changes, sending them upstream and supporting them in the meantime, or much rather wait for the upgrade 'til WS 3.0 and switch that to Qt 5.10 and use QtCharts instead? It depends of course on what version of Qt Charts is needed and if those support all necessary things for us, but in the long run seems to be the better method. Does not mean we should remove QCustomPlot right away or at all, but keep it in the 2.x and go with Qt Charts in 3.0. As said, depends on the version of Qt we choose for 3.0 cheers Roland On Sat, Feb 10, 2018 at 11:23 AM, Martin Mathieson via Wireshark-dev mailto:wireshark-dev@wireshark.org> > wrote: Thanks Alexis, I had not seen your earlier draft.. Nor had I diffed the earlier QCustomPlot release against what we were using to realise that we were patching it. Can already see one place where I did things differently to you :) Martin On Sat, Feb 10, 2018 at 9:02 AM, Alexis La Goutte mailto:alexis.lagou...@gmail.com> > wrote: Hi, I have already try on 2016 (when there is qcustomplot 2.0 beta) (published my old draft > https://code.wireshark.org/review/#/c/17980/ ) But there is some issue (some change on function and need to reapply some wireshark patch if i remenber..) But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) Cheers On Sat, Feb 10, 2018 at 8:43 AM, Roland Knall mailto:rkn...@gmail.com> > wrote: Hi It would be a good thing for 2.6. So gar it should work out. Just a short request, if you add it, please check it Qt4.8 is still supported for it (requirement for 2.6) and if you add it, we should move it to a new directory. I’ll do the latter in a separate patch before I think. Regards Roland > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev > mailto:wireshark-dev@wireshark.org> >: > > Hi, > > This was released September last year, has anyone else played with it? > > Locally, I got all our uses of it compiling (but mostly not tested). The > reason I tried it out was that for the LTE RLC Graph, I wanted to use the > QCPAxisTickerFixed class, to force it to not subdivide the Sequence Number Y > axis (which are whole numbers). This works nicely now for me. > > Unless anyone knows of any problems with it, I will work through the changes > to our other users of it over the next few days and post a WIP patch - I'm > probably not in a good position to test all of them thoroughly. > > Regards, > Martin > ___ > Sent via:Wireshark-dev mailing list <mailto:wireshark-dev@wireshark.org> > > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev &g
Re: [Wireshark-dev] QCustomPlot 2.0.0
Qt Charts look nice (and it look available from Qt 5.6...) Not really time for the moment to try to finish the port to qcustomsplot and we have already try to push some patch on upstream but it is very long ! On Sat, Feb 10, 2018 at 3:03 PM, Roland Knallwrote: > ;-) My main concern though will be performance. We have to figure out, if > QCustomPlot or Qt Charts is better in regards to performance, some initial > tests do not show a clear winner, but all in due time. > > My main concern is just, that we cannot integrate QCustomPlot 2.0 without > modifications. > > cheers > Roland > > On Sat, Feb 10, 2018 at 12:52 PM, Martin Mathieson via Wireshark-dev < > wireshark-dev@wireshark.org> wrote: > >> Given how good the Qt Charts screenshots look, and how unimportant the >> change to control the ticks on my axis is to me, I will leave this. >> Martin >> >> On Sat, Feb 10, 2018 at 10:42 AM, Roland Knall wrote: >> >>> I've tried to port Alexis patch to the current master and use >>> QCustomPlot 2.0.0 final with it. >>> >>> Ran into quite a few issues, mostly virtual methods not properly marked >>> for override. This leads to a compilation dropout with -Werror. >>> >>> So, the question I am having is, is it worth implementing QCustomPlot >>> 2.0.0 with all necessary changes, sending them upstream and supporting them >>> in the meantime, or much rather wait for the upgrade 'til WS 3.0 and switch >>> that to Qt 5.10 and use QtCharts instead? It depends of course on what >>> version of Qt Charts is needed and if those support all necessary things >>> for us, but in the long run seems to be the better method. >>> >>> Does not mean we should remove QCustomPlot right away or at all, but >>> keep it in the 2.x and go with Qt Charts in 3.0. As said, depends on the >>> version of Qt we choose for 3.0 >>> >>> cheers >>> Roland >>> >>> On Sat, Feb 10, 2018 at 11:23 AM, Martin Mathieson via Wireshark-dev < >>> wireshark-dev@wireshark.org> wrote: >>> Thanks Alexis, I had not seen your earlier draft.. Nor had I diffed the earlier QCustomPlot release against what we were using to realise that we were patching it. Can already see one place where I did things differently to you :) Martin On Sat, Feb 10, 2018 at 9:02 AM, Alexis La Goutte < alexis.lagou...@gmail.com> wrote: > > Hi, > > I have already try on 2016 (when there is qcustomplot 2.0 beta) > (published my old draft > https://code.wireshark.org/review/#/c/17980/ > ) > > But there is some issue (some change on function and need to reapply > some wireshark patch if i remenber..) > > But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) > > Cheers > > On Sat, Feb 10, 2018 at 8:43 AM, Roland Knall > wrote: > >> Hi >> >> It would be a good thing for 2.6. So gar it should work out. Just a >> short request, if you add it, please check it Qt4.8 is still supported >> for >> it (requirement for 2.6) and if you add it, we should move it to a new >> directory. >> >> I’ll do the latter in a separate patch before I think. >> >> Regards >> Roland >> >> > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev < >> wireshark-dev@wireshark.org>: >> > >> > Hi, >> > >> > This was released September last year, has anyone else played with >> it? >> > >> > Locally, I got all our uses of it compiling (but mostly not >> tested). The reason I tried it out was that for the LTE RLC Graph, I >> wanted to use the QCPAxisTickerFixed class, to force it to not subdivide >> the Sequence Number Y axis (which are whole numbers). This works nicely >> now for me. >> > >> > Unless anyone knows of any problems with it, I will work through >> the changes to our other users of it over the next few days and post a >> WIP >> patch - I'm probably not in a good position to test all of them >> thoroughly. >> > >> > Regards, >> > Martin >> > >> ___ >> > Sent via:Wireshark-dev mailing list < >> wireshark-dev@wireshark.org> >> > Archives:https://www.wireshark.org/lists/wireshark-dev >> > Unsubscribe: https://www.wireshark.org/mail >> man/options/wireshark-dev >> > mailto:wireshark-dev-requ...@wireshark.org >> ?subject=unsubscribe >> >> ___ >> Sent via:Wireshark-dev mailing list >> Archives:https://www.wireshark.org/lists/wireshark-dev >> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >> mailto:wireshark-dev-requ...@wireshark.org >> ?subject=unsubscribe > > > >
Re: [Wireshark-dev] QCustomPlot 2.0.0
;-) My main concern though will be performance. We have to figure out, if QCustomPlot or Qt Charts is better in regards to performance, some initial tests do not show a clear winner, but all in due time. My main concern is just, that we cannot integrate QCustomPlot 2.0 without modifications. cheers Roland On Sat, Feb 10, 2018 at 12:52 PM, Martin Mathieson via Wireshark-dev < wireshark-dev@wireshark.org> wrote: > Given how good the Qt Charts screenshots look, and how unimportant the > change to control the ticks on my axis is to me, I will leave this. > Martin > > On Sat, Feb 10, 2018 at 10:42 AM, Roland Knallwrote: > >> I've tried to port Alexis patch to the current master and use QCustomPlot >> 2.0.0 final with it. >> >> Ran into quite a few issues, mostly virtual methods not properly marked >> for override. This leads to a compilation dropout with -Werror. >> >> So, the question I am having is, is it worth implementing QCustomPlot >> 2.0.0 with all necessary changes, sending them upstream and supporting them >> in the meantime, or much rather wait for the upgrade 'til WS 3.0 and switch >> that to Qt 5.10 and use QtCharts instead? It depends of course on what >> version of Qt Charts is needed and if those support all necessary things >> for us, but in the long run seems to be the better method. >> >> Does not mean we should remove QCustomPlot right away or at all, but keep >> it in the 2.x and go with Qt Charts in 3.0. As said, depends on the version >> of Qt we choose for 3.0 >> >> cheers >> Roland >> >> On Sat, Feb 10, 2018 at 11:23 AM, Martin Mathieson via Wireshark-dev < >> wireshark-dev@wireshark.org> wrote: >> >>> Thanks Alexis, I had not seen your earlier draft.. >>> >>> Nor had I diffed the earlier QCustomPlot release against >>> what we were using to realise that we were patching it. Can already >>> see one place where I did things differently to you :) >>> >>> Martin >>> >>> On Sat, Feb 10, 2018 at 9:02 AM, Alexis La Goutte < >>> alexis.lagou...@gmail.com> wrote: >>> Hi, I have already try on 2016 (when there is qcustomplot 2.0 beta) (published my old draft > https://code.wireshark.org/review/#/c/17980/ ) But there is some issue (some change on function and need to reapply some wireshark patch if i remenber..) But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) Cheers On Sat, Feb 10, 2018 at 8:43 AM, Roland Knall wrote: > Hi > > It would be a good thing for 2.6. So gar it should work out. Just a > short request, if you add it, please check it Qt4.8 is still supported for > it (requirement for 2.6) and if you add it, we should move it to a new > directory. > > I’ll do the latter in a separate patch before I think. > > Regards > Roland > > > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev < > wireshark-dev@wireshark.org>: > > > > Hi, > > > > This was released September last year, has anyone else played with > it? > > > > Locally, I got all our uses of it compiling (but mostly not > tested). The reason I tried it out was that for the LTE RLC Graph, I > wanted to use the QCPAxisTickerFixed class, to force it to not subdivide > the Sequence Number Y axis (which are whole numbers). This works nicely > now for me. > > > > Unless anyone knows of any problems with it, I will work through the > changes to our other users of it over the next few days and post a WIP > patch - I'm probably not in a good position to test all of them > thoroughly. > > > > Regards, > > Martin > > > ___ > > Sent via:Wireshark-dev mailing list > > > Archives:https://www.wireshark.org/lists/wireshark-dev > > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > > mailto:wireshark-dev-requ...@wireshark.org > ?subject=unsubscribe > > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org > ?subject=unsubscribe ___ Sent via:Wireshark-dev mailing list Archives:https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org ?subject=unsubscribe >>> >>> >>>
Re: [Wireshark-dev] QCustomPlot 2.0.0
Given how good the Qt Charts screenshots look, and how unimportant the change to control the ticks on my axis is to me, I will leave this. Martin On Sat, Feb 10, 2018 at 10:42 AM, Roland Knallwrote: > I've tried to port Alexis patch to the current master and use QCustomPlot > 2.0.0 final with it. > > Ran into quite a few issues, mostly virtual methods not properly marked > for override. This leads to a compilation dropout with -Werror. > > So, the question I am having is, is it worth implementing QCustomPlot > 2.0.0 with all necessary changes, sending them upstream and supporting them > in the meantime, or much rather wait for the upgrade 'til WS 3.0 and switch > that to Qt 5.10 and use QtCharts instead? It depends of course on what > version of Qt Charts is needed and if those support all necessary things > for us, but in the long run seems to be the better method. > > Does not mean we should remove QCustomPlot right away or at all, but keep > it in the 2.x and go with Qt Charts in 3.0. As said, depends on the version > of Qt we choose for 3.0 > > cheers > Roland > > On Sat, Feb 10, 2018 at 11:23 AM, Martin Mathieson via Wireshark-dev < > wireshark-dev@wireshark.org> wrote: > >> Thanks Alexis, I had not seen your earlier draft.. >> >> Nor had I diffed the earlier QCustomPlot release against >> what we were using to realise that we were patching it. Can already see >> one place where I did things differently to you :) >> >> Martin >> >> On Sat, Feb 10, 2018 at 9:02 AM, Alexis La Goutte < >> alexis.lagou...@gmail.com> wrote: >> >>> >>> Hi, >>> >>> I have already try on 2016 (when there is qcustomplot 2.0 beta) >>> (published my old draft > https://code.wireshark.org/review/#/c/17980/ ) >>> >>> But there is some issue (some change on function and need to reapply >>> some wireshark patch if i remenber..) >>> >>> But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) >>> >>> Cheers >>> >>> On Sat, Feb 10, 2018 at 8:43 AM, Roland Knall wrote: >>> Hi It would be a good thing for 2.6. So gar it should work out. Just a short request, if you add it, please check it Qt4.8 is still supported for it (requirement for 2.6) and if you add it, we should move it to a new directory. I’ll do the latter in a separate patch before I think. Regards Roland > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev < wireshark-dev@wireshark.org>: > > Hi, > > This was released September last year, has anyone else played with it? > > Locally, I got all our uses of it compiling (but mostly not tested). The reason I tried it out was that for the LTE RLC Graph, I wanted to use the QCPAxisTickerFixed class, to force it to not subdivide the Sequence Number Y axis (which are whole numbers). This works nicely now for me. > > Unless anyone knows of any problems with it, I will work through the changes to our other users of it over the next few days and post a WIP patch - I'm probably not in a good position to test all of them thoroughly. > > Regards, > Martin > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org ?subject=unsubscribe ___ Sent via:Wireshark-dev mailing list Archives:https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org ?subject=unsubscribe >>> >>> >>> >>> >>> ___ >>> Sent via:Wireshark-dev mailing list >>> Archives:https://www.wireshark.org/lists/wireshark-dev >>> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >>> mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscr >>> ibe >>> >> >> >> >> ___ >> Sent via:Wireshark-dev mailing list >> Archives:https://www.wireshark.org/lists/wireshark-dev >> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >> mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscr >> ibe >> > > > > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe:
Re: [Wireshark-dev] QCustomPlot 2.0.0
I've tried to port Alexis patch to the current master and use QCustomPlot 2.0.0 final with it. Ran into quite a few issues, mostly virtual methods not properly marked for override. This leads to a compilation dropout with -Werror. So, the question I am having is, is it worth implementing QCustomPlot 2.0.0 with all necessary changes, sending them upstream and supporting them in the meantime, or much rather wait for the upgrade 'til WS 3.0 and switch that to Qt 5.10 and use QtCharts instead? It depends of course on what version of Qt Charts is needed and if those support all necessary things for us, but in the long run seems to be the better method. Does not mean we should remove QCustomPlot right away or at all, but keep it in the 2.x and go with Qt Charts in 3.0. As said, depends on the version of Qt we choose for 3.0 cheers Roland On Sat, Feb 10, 2018 at 11:23 AM, Martin Mathieson via Wireshark-dev < wireshark-dev@wireshark.org> wrote: > Thanks Alexis, I had not seen your earlier draft.. > > Nor had I diffed the earlier QCustomPlot release against > what we were using to realise that we were patching it. Can already see > one place where I did things differently to you :) > > Martin > > On Sat, Feb 10, 2018 at 9:02 AM, Alexis La Goutte < > alexis.lagou...@gmail.com> wrote: > >> >> Hi, >> >> I have already try on 2016 (when there is qcustomplot 2.0 beta) >> (published my old draft > https://code.wireshark.org/review/#/c/17980/ ) >> >> But there is some issue (some change on function and need to reapply some >> wireshark patch if i remenber..) >> >> But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) >> >> Cheers >> >> On Sat, Feb 10, 2018 at 8:43 AM, Roland Knallwrote: >> >>> Hi >>> >>> It would be a good thing for 2.6. So gar it should work out. Just a >>> short request, if you add it, please check it Qt4.8 is still supported for >>> it (requirement for 2.6) and if you add it, we should move it to a new >>> directory. >>> >>> I’ll do the latter in a separate patch before I think. >>> >>> Regards >>> Roland >>> >>> > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev < >>> wireshark-dev@wireshark.org>: >>> > >>> > Hi, >>> > >>> > This was released September last year, has anyone else played with it? >>> > >>> > Locally, I got all our uses of it compiling (but mostly not tested). >>> The reason I tried it out was that for the LTE RLC Graph, I wanted to use >>> the QCPAxisTickerFixed class, to force it to not subdivide the Sequence >>> Number Y axis (which are whole numbers). This works nicely now for me. >>> > >>> > Unless anyone knows of any problems with it, I will work through the >>> changes to our other users of it over the next few days and post a WIP >>> patch - I'm probably not in a good position to test all of them thoroughly. >>> > >>> > Regards, >>> > Martin >>> > >>> ___ >>> > Sent via:Wireshark-dev mailing list >>> > Archives:https://www.wireshark.org/lists/wireshark-dev >>> > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >>> > mailto:wireshark-dev-requ...@wireshark.org >>> ?subject=unsubscribe >>> >>> ___ >>> Sent via:Wireshark-dev mailing list >>> Archives:https://www.wireshark.org/lists/wireshark-dev >>> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >>> mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscr >>> ibe >> >> >> >> >> ___ >> Sent via:Wireshark-dev mailing list >> Archives:https://www.wireshark.org/lists/wireshark-dev >> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >> mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscr >> ibe >> > > > > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org?subject= > unsubscribe > ___ Sent via:Wireshark-dev mailing list Archives:https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
Re: [Wireshark-dev] QCustomPlot 2.0.0
Thanks Alexis, I had not seen your earlier draft.. Nor had I diffed the earlier QCustomPlot release against what we were using to realise that we were patching it. Can already see one place where I did things differently to you :) Martin On Sat, Feb 10, 2018 at 9:02 AM, Alexis La Gouttewrote: > > Hi, > > I have already try on 2016 (when there is qcustomplot 2.0 beta) (published > my old draft > https://code.wireshark.org/review/#/c/17980/ ) > > But there is some issue (some change on function and need to reapply some > wireshark patch if i remenber..) > > But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) > > Cheers > > On Sat, Feb 10, 2018 at 8:43 AM, Roland Knall wrote: > >> Hi >> >> It would be a good thing for 2.6. So gar it should work out. Just a short >> request, if you add it, please check it Qt4.8 is still supported for it >> (requirement for 2.6) and if you add it, we should move it to a new >> directory. >> >> I’ll do the latter in a separate patch before I think. >> >> Regards >> Roland >> >> > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev < >> wireshark-dev@wireshark.org>: >> > >> > Hi, >> > >> > This was released September last year, has anyone else played with it? >> > >> > Locally, I got all our uses of it compiling (but mostly not tested). >> The reason I tried it out was that for the LTE RLC Graph, I wanted to use >> the QCPAxisTickerFixed class, to force it to not subdivide the Sequence >> Number Y axis (which are whole numbers). This works nicely now for me. >> > >> > Unless anyone knows of any problems with it, I will work through the >> changes to our other users of it over the next few days and post a WIP >> patch - I'm probably not in a good position to test all of them thoroughly. >> > >> > Regards, >> > Martin >> > >> ___ >> > Sent via:Wireshark-dev mailing list >> > Archives:https://www.wireshark.org/lists/wireshark-dev >> > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >> > mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscr >> ibe >> >> ___ >> Sent via:Wireshark-dev mailing list >> Archives:https://www.wireshark.org/lists/wireshark-dev >> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev >> mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscr >> ibe > > > > > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org?subject= > unsubscribe > ___ Sent via:Wireshark-dev mailing list Archives:https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
Re: [Wireshark-dev] QCustomPlot 2.0.0
Hi, I have already try on 2016 (when there is qcustomplot 2.0 beta) (published my old draft > https://code.wireshark.org/review/#/c/17980/ ) But there is some issue (some change on function and need to reapply some wireshark patch if i remenber..) But qcustomsplot 2.0 is compatible with Qt 4.8 (to Qt 5.9) Cheers On Sat, Feb 10, 2018 at 8:43 AM, Roland Knallwrote: > Hi > > It would be a good thing for 2.6. So gar it should work out. Just a short > request, if you add it, please check it Qt4.8 is still supported for it > (requirement for 2.6) and if you add it, we should move it to a new > directory. > > I’ll do the latter in a separate patch before I think. > > Regards > Roland > > > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev < > wireshark-dev@wireshark.org>: > > > > Hi, > > > > This was released September last year, has anyone else played with it? > > > > Locally, I got all our uses of it compiling (but mostly not tested). > The reason I tried it out was that for the LTE RLC Graph, I wanted to use > the QCPAxisTickerFixed class, to force it to not subdivide the Sequence > Number Y axis (which are whole numbers). This works nicely now for me. > > > > Unless anyone knows of any problems with it, I will work through the > changes to our other users of it over the next few days and post a WIP > patch - I'm probably not in a good position to test all of them thoroughly. > > > > Regards, > > Martin > > > ___ > > Sent via:Wireshark-dev mailing list > > Archives:https://www.wireshark.org/lists/wireshark-dev > > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > > mailto:wireshark-dev-requ...@wireshark.org?subject= > unsubscribe > > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org?subject= > unsubscribe ___ Sent via:Wireshark-dev mailing list Archives:https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
Re: [Wireshark-dev] QCustomPlot 2.0.0
Hi It would be a good thing for 2.6. So gar it should work out. Just a short request, if you add it, please check it Qt4.8 is still supported for it (requirement for 2.6) and if you add it, we should move it to a new directory. I’ll do the latter in a separate patch before I think. Regards Roland > Am 10.02.2018 um 00:03 schrieb Martin Mathieson via Wireshark-dev >: > > Hi, > > This was released September last year, has anyone else played with it? > > Locally, I got all our uses of it compiling (but mostly not tested). The > reason I tried it out was that for the LTE RLC Graph, I wanted to use the > QCPAxisTickerFixed class, to force it to not subdivide the Sequence Number Y > axis (which are whole numbers). This works nicely now for me. > > Unless anyone knows of any problems with it, I will work through the changes > to our other users of it over the next few days and post a WIP patch - I'm > probably not in a good position to test all of them thoroughly. > > Regards, > Martin > ___ > Sent via:Wireshark-dev mailing list > Archives:https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe ___ Sent via:Wireshark-dev mailing list Archives:https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe