Hi Alan,
I'm not so skilled to reply you giving all the details as your case
requires but this issues could be related to hamlib version.
Try to follow my WSJT-X building example because it download and compile
a specific hamlib which should works correctly for every setup.
If it fails then try
Hi Marco and Guillaume,
Linux: Fedora release 29 (Twenty Nine)
kernel: 5.3.11-100.fc29.x86_64
Machine: i3 8100 Z370 m/b, Intel graphics on the i3 CPU.
Compiles and runs just fine here. BUT: Rig always "None" and DTR PTT.
Hamlib on the IC-910H with three bands, 2m, 70cm and 23cm got confused.
Aud
Hi Guillaume,
I'm on openSUSE Tumbleweed, so the mileage may vary.
I'm able to compile the WSJT-X source 2.1.2 by running the following
(adjust for your env):
marco@linux-turion64:~/WSJT-X_build/build>
tar -xzvf /home/marco/Scaricati/wsjtx-2.1.2.tgz -C
/home/marco/WSJT-X_build/build/
cd /home/m
Hello all
I'm under Ubuntu 19.04. I have downloaded the tar.gz file (2.1.2) from
the website (I checked in sourceforce repo, file is same). Iwant last
revision instead of the ubuntu one which is quite old.
I made the Build dir, cmake, cmake --build and I get an error I can't
find a way to turn ar
Hello again,
I have just updating wsjt-x 1.7.0 with jtsdk and I have an CMake error after
--Configuration done with :
-- Configuring done
CMake Error at CMakeLists.txt:874 (add_library):
Cannot find source file:
lib/fqso_first.f90
Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h
