Jim:
No.I had dxpedition mode in Advanced checked on
Thanks Jim
W8CZN
Jim Brown wrote:
> Of course. You're not in DXpedition Mode. READ THE WSJT-X MANUAL ABOUT
> DXPEDITION MODE.
>
> 73, Jim K9YC
>
> On 3/14/2019 1:11 PM, jtul...@roadrunner.com wrote:
> > PINO:
> >
> > This
Of course. You're not in DXpedition Mode. READ THE WSJT-X MANUAL ABOUT
DXPEDITION MODE.
73, Jim K9YC
On 3/14/2019 1:11 PM, jtul...@roadrunner.com wrote:
PINO:
This same thing has happened to me with three 5X3E QSOs in F/H mode.
Very frustrating!
Does anyone have a solution?
PINO:
This same thing has happened to me with three 5X3E QSOs in F/H mode.
Very frustrating!
Does anyone have a solution?
Thanks !
Jim W8CZN
Pino Zollo wrote:
> This morning again and worst:
>
> 5X3E dis answer +02 but my WSJTX did not catch it. I did change by hand
> to R-02
>
>
Hi Steve...
you are right.
for some strange case WSJTX was not in F/H mode any more.
The configuration had retained the frequencies but not the F/H mode.
Sorry
73
Pino ZP4KFX
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
This morning again and worst:
5X3E dis answer +02 but my WSJTX did not catch it. I did change by hand
to R-02
and then did not catch RR73 and by hand I did force 73
73
Pino ZP4KFX
101930 -3 0.4 337 ~ RV0AR 5X3E -04
101945 Tx 1729 ~ 5X3E ZP4KFX GG14
102000 -2 0.4 337 ~ RV0AR RR73; ZP4KFX
The line that contains RR73 suggest you were not in F/H but in QSO with
a JTDX user. This is a WSJT-X clone with some mods one of which being to
merge RR73 to previous QSO with report for the next QSO.
73,
Serge
On 13/03/2019 23:36, Steven Franke via wsjt-devel wrote:
Hi Pino,
You called
Hi Pino,
You called the DX on 1321 Hz offset. Then, the DX responded to you with report
+00. If you were operating as a Hound, then your next transmission should have
been at 303 Hz. Instead, you transmitted your “R-20” again at 1321 offset. This
behavior suggests that you were not operating
And I have had many cases where only my call is sent with no signal reports
transmitted even though the reports show as expected in the five sequences
below. Any ideas? Has happened a number of times.
Thanks
Lorin
WA1PGB
Sent from my iPhone
> On Mar 13, 2019, at 3:11 PM, Pino Zollo
Wrong sequence: WSJT 2.0.1 does not realize having received RR73 and
replies with R-20
I had to force by hand the 73
I have seen this fact 3 times with different F/H stations.
73
Pino ZP4KFX
20415 Tx 1321 ~ 7P8LB ZP4KFX GG14
220430 -20 0.0 303 ~ ZP4KFX 7P8LB +00 ? a3
220445 Tx 1321 ~ 7P8LB