The callsign database file is associated with JTAlertX, not WSJT-X. I was looking in the wrong place.
Frank
Sent: Thursday, August 02, 2018 at 5:29 PM
From: "Laurie, VK3AMA" <_vk3a...@vkdxer.net>
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Integration
On Thu, Aug 2, 2018 at 6:51 PM, Laurie, VK3AMA <_vk3a...@vkdxer.net> wrote:
>
>
> On 3/08/2018 8:36 AM, Black Michael via wsjt-devel wrote:
>
>> The main solution was turning on HRD logging :-)
>>
>
It's actually a little more complicated than that. First, you have to know
that you must turn on th
On 3/08/2018 8:36 AM, Black Michael via wsjt-devel wrote:
The main solution was turning on HRD logging :-)
Other things had to do with audio settings for operations, wide graph
settings, and such.
de Mike W9MDB
Thanks Mike,
Hmmm, Not having the logging enabled would not have produced the
The main solution was turning on HRD logging :-)
Other things had to do with audio settings for operations, wide graph settings,
and such.
de Mike W9MDB
On Thursday, August 2, 2018, 4:53:13 PM CDT, Frank Kirschner
wrote:
There were a bunch of settings that needed attention that I d
There were a bunch of settings that needed attention that I didn't know
about. Mike knew exactly what to do.
Frank
On Thu, Aug 2, 2018, 17:29 Laurie, VK3AMA <_vk3a...@vkdxer.net> wrote:
>
>
> On 3/08/2018 4:03 AM, Frank Kirschner wrote:
> > Mike Black got me set up with JTAlertX, and it's workin
On 3/08/2018 4:03 AM, Frank Kirschner wrote:
Mike Black got me set up with JTAlertX, and it's working well. Thanks.
I remember reading about a callsign database that should be
downloaded, but I can't find the reference or the database itself.
Where is either one?
73,
Frank
KF6E
Frank or
On 3/08/2018 4:03 AM, Frank Kirschner wrote:
Mike Black got me set up with JTAlertX, and it's working well. Thanks.
73,
Frank
KF6E
Frank or Mike,
What was the problem?
de Laurie VK3AMA
--
Check out the vibrant t
Doh! I was looking at the WSJT page. Short between the headsets.
Thanks.
Frank
On Thu, Aug 2, 2018 at 3:01 PM, Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Frank
> If you got to the same place as you downloaded JTAlert the callsign
> database link is a bit below it.
Frank
If you got to the same place as you downloaded JTAlert the callsign database
link is a bit below it.
de Mike W9MDB
On Thursday, August 2, 2018, 1:06:13 PM CDT, Frank Kirschner
wrote:
Mike Black got me set up with JTAlertX, and it's working well. Thanks.
I remember reading ab
Mike Black got me set up with JTAlertX, and it's working well. Thanks.
I remember reading about a callsign database that should be downloaded, but
I can't find the reference or the database itself. Where is either one?
73,
Frank
KF6E
---
->Applications<->WSJT-X
> …. UDP Port is here 2334
>
>
>
> John PA5JS
>
>
>
> *Van:* Frank Kirschner [mailto:fr...@fkirschner.net]
> *Verzonden:* donderdag 2 augustus 2018 02:11
> *Aan:* Black Michael; WSJT software development
> *Onderwerp:* Re: [wsjt-
[wsjt-devel] Integration with HRD
My memory isn't very good, and I forgot that I tried this a while back. I tried
it again, and get the same error message:
The settings in WSJT-X look exactly like those shown in the Setup section of
the help file.
No idea what to do now. Any
My memory isn't very good, and I forgot that I tried this a while back. I
tried it again, and get the same error message:
The settings in WSJT-X look exactly like those shown in the Setup section
of the help file.
No idea what to do now. Any suggestions would be appreciated.
73,
Frank
KF6E
O
JTAlert will do it with WSJT-X plus more
http://www.hamapps.com
de Mike W9MDB
On Wednesday, August 1, 2018, 2:42:01 PM CDT, Frank Kirschner
wrote:
I'm still pretty inexperienced with the WSJT-X software, so forgive me if I'm
missing the obvious, but it would be really nice if th
I'm still pretty inexperienced with the WSJT-X software, so forgive me if
I'm missing the obvious, but it would be really nice if the WSJT-X program
could feed QSO information to HRD Logbook.
In DM-780, when I send a macro with the command to log the QSO, it does so.
It seems like it should be pos
15 matches
Mail list logo
