-devel] JT 1.50
Hi Adriaan,
The behaviour of the Enable Tx button has changed slightly in v1.5. It
now toggles on and off automatic transmission. If you turn off automatic
transmission during a transmit period the current transmission will
finish normally. If you wish to interrupt the current
is probably not
correct for WSPR modes although that is probably not important.
Charlie
73
Bill
G4WJS.
-Original Message-
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: 10 June 2015 22:28
To: WSJT software development; PE2K
Subject: Re: [wsjt-devel] JT 1.50
Hi
Hi Adrian,
We are aware that some users (not all) experience this problem. We are
looking into it.
-- 73, Joe, K1JT
On 6/10/2015 4:59 PM, PE2K wrote:
Dear OM,
In JT vers X 1.50 i make a transmitting in JT9, but when i do a disable
TX, the transmitting is not stopping but stays on.
Hi Adriaan,
The behaviour of the Enable Tx button has changed slightly in v1.5. It
now toggles on and off automatic transmission. If you turn off automatic
transmission during a transmit period the current transmission will
finish normally. If you wish to interrupt the current transmission
Hi All
From my testing here on both XP and Win7 operating systems the Enable
Tx and Halt Tx buttons do now work as Bill describes. I am using
r5567. I think the confusion arises because the Tx: Message indicator
at the left hand bottom of the main window stays on after Halt Tx is
pressed
On 10/06/2015 23:28, Rex wrote:
Hi All
Hi Rex,
From my testing here on both XP and Win7 operating systems the Enable
Tx and Halt Tx buttons do now work as Bill describes. I am using
r5567. I think the confusion arises because the Tx: Message indicator
at the left hand bottom of the main
Hi Bill
In case it helps I just did a test using PTT switching and PTT does drop
off (as well as the tones) at the time I click Halt TX even though the
TX: message indicator still shows it is TXing.
Rex
On 11/06/2015 8:39 AM, Bill Somerville wrote:
On 10/06/2015 23:28, Rex wrote:
Hi All
On 10/06/2015 23:28, Rex wrote:
Hi All
Hi Rex,
From my testing here on both XP and Win7 operating systems the Enable
Tx and Halt Tx buttons do now work as Bill describes. I am using
r5567. I think the confusion arises because the Tx: Message indicator
at the left hand bottom of the main
]
Sent: 10 June 2015 22:28
To: WSJT software development; PE2K
Subject: Re: [wsjt-devel] JT 1.50
Hi Adriaan,
The behaviour of the Enable Tx button has changed slightly in v1.5. It
now toggles on and off automatic transmission. If you turn off automatic
transmission during a transmit period
Hi Bill
Yes I am using v1.6.-0-devel, r5567 so this may well be the reason you
can't duplicate it on 1.5. Thus my original comments may not be
relevant to 1.5 on which the issue was originally raised. If so they can
be ignored as it is not a critical issue.
And it does happen with JT9 and
10 matches
Mail list logo
