what rig type did
On Mon, Nov 25, 2019 at 9:45 PM Jon Anhold wrote:
> I'm not sure why yet, but when I upgrade to 2.1.1, I get the following
> error on startup:
>
> [image: image.png]
>
> 73 de KM8V
>
> On Mon, Nov 25, 2019 at 1:43 PM Joe Taylor wrote:
>
>> The WSJT Development Group is
I got the same error on my K3, but if I just selected the correct rig,
everything worked fine. All I could see is that the rig type was reset
to the top of the list.
On Tue, 26 Nov 2019, Bill Somerville wrote:
On 25/11/2019 18:40, Joe Taylor wrote:
The WSJT Development Group is pleased to
For those having Icom rig control problems here's a zip file of a 32-bit
version of hamlib.
https://www.dropbox.com/s/9gv73e9m0stijxw/gitnotes.docx?dl=0
It will work with the 64-bit version of WSJT-X also.
#1 Unzip this file into it's own directory.
#2 Ensure WSJT-X is not running.
#3 Run this
Hi Bill
there was a lack of disk space.
So I reinstalled all. now the compilation runs to 93% But then all hangs
and the smartphone becomes warm (only a hard-reset of the smartphone
helped)
I think it is OS-implementation related.
Is it possible to reduce the use of memory in cmake?
[image:
On Sun, Nov 24, 2019 at 6:09 PM Karl Heinz Kremer wrote:
> [ ... ] I am using wsjt-x 2.0.1 on a Raspberry Pi 4
>
My fingers were a bit faster than the brain, I am of course using version
2.1.0 - sorry about that.
___
wsjt-devel mailing list
On 25/11/2019 15:34, Andreas Heertsch wrote:
Hi Bill
there was a lack of disk space.
So I reinstalled all. now the compilation runs to 93% But then all
hangs and the smartphone becomes warm (only a hard-reset of the
smartphone helped)
I think it is OS-implementation related.
Is it
I'm not sure why yet, but when I upgrade to 2.1.1, I get the following
error on startup:
[image: image.png]
73 de KM8V
On Mon, Nov 25, 2019 at 1:43 PM Joe Taylor wrote:
> The WSJT Development Group is pleased to announce the general
> availability (GA) release of WSJT-X Version 2.1.1.
>
>
The WSJT Development Group is pleased to announce the general
availability (GA) release of WSJT-X Version 2.1.1.
WSJT-X 2.1.1 is a bug-fix release that addresses regressions in the
v2.1.0. The new version executes properly on Macintosh machines running
macOS 10.15 (Catalina).
A list of
I just installed the v2.1.1 64b version to test the monitor placement
memory across 3 monitors. It still does not work. The main window is off
to the right of my right most monitor and the WF is on the main monitor.
After repositioning and resizing on the middle and left monitor, all is
good
WSJT-X 2.1.1 64-bit works well so far on my Win 10 system. Also no OmniRig
issues so far. Thanks for this new release.
One thing: "Hold Tx Freq" setting is still not remembered when coming back
from F/H mode. IMO would be worth to be fixed, as it could cause
accidentally QRM.
73 de Uwe, DG2YCB
Thanks to all the WSJT-X Team for the new release, I've just compiled it
from source file and it's running perfectly (so far) on my Linux
Tumbleweed 64 bits jointly with CQRLOG.
--
73 de Marco, PY1ZRJ (former IK5BCU)
Il 25/11/19 15:40, Joe Taylor ha scritto:
> The WSJT Development Group is
Same here with Windows 10 computer and IC-7610 radio. Always worked
correctly before this version 2.1.1.
My Windows 7 computer worked correctly.
K5PA/Gene
On 11/25/2019 2:41 PM, Jon Anhold wrote:
I'm not sure why yet, but when I upgrade to 2.1.1, I get the following
error on startup:
Please run this and send me the log.txt file
In the WSJTX\bin directory run this
rigctl-wsjtx -m 378 -r COM1 -s 19200 -Z -v V VFOA f q 2>&1 >log.txt
Adjust COM port and baud rate to suit
de Mike W9MDB
On Monday, November 25, 2019, 04:29:10 PM CST, Gene H
wrote:
Same here
I found after upgrading to Catalina and WSJT-X v2.1.1 that I had to reset my
Serial Port and Soundcard settings in WSJT-X. Hope this helps. Thanks. Robert.
AD6I.
On Mon, Nov 25, 2019, at 2:42 PM, Greg Vatt wrote:
>
> Same problem here. macOS Catalina 10.15.1, ICOM IC-7610.
>
> Greg NC7B
>
>
Same problem here. macOS Catalina 10.15.1, ICOM IC-7610.
Greg NC7B
> On Nov 25, 2019, at 3:24 PM, Gene H wrote:
>
> Same here with Windows 10 computer and IC-7610 radio. Always worked correctly
> before this version 2.1.1.
>
>
>
> My Windows 7 computer worked correctly.
>
>
I have the same result. In my case the OS is 64 Bit:
The radio is IC-7600. I changed back to version 2.1.0 and it is working fine
again.73Alex, XE1MEX
- Forwarded Message - From: Gene H To:
"wsjt-devel@lists.sourceforge.net" Sent:
Monday, November 25, 2019, 04:28:49 PM CSTSubject:
I’m also getting the same error on my Mac when I try to use the same Icom 756
PRO settings that work under 2.1.0.
Im running OS X 10.13.6.
On Nov 25, 2019, at 17:29, Gene H mailto:ghin...@gmail.com>>
wrote:
Same here with Windows 10 computer and IC-7610 radio. Always worked correctly
before
Robert,
The error I keep getting is the result of trying to reset the Serial Port. The
Sound setting are configured properly and I can demod/decode signals. I just
can’t control the radio from WSJT-X. (The Mac sees all 3 of the IC-7610 USB
ports.)
Greg
> On Nov 25, 2019, at 4:05 PM, Robert
Bill, that was a very good hint: no -j. now it compiles as expected.
But if I start wsjtx itself, there is the) (frosen nag-screen of wsjtx and
a lot of err-msgs:
[image: image.png]
Some more error-msgs followed.
After one or two minutes the smartphone autorestarts.
Is it time to stop trying to
On 26/11/2019 00:00, Andreas Heertsch wrote:
Bill, that was a very good hint: no -j. now it compiles as expected.
But if I start wsjtx itself, there is the) (frosen nag-screen of
wsjtx and a lot of err-msgs:
image.png
Some more error-msgs followed.
After one or two minutes the smartphone
On 25/11/2019 18:40, Joe Taylor wrote:
The WSJT Development Group is pleased to announce the general
availability (GA) release of WSJT-X Version 2.1.1.
Hi all WSJT-X users,
thanks for the issue reports from Icom users who have not been able to
use WSJT_X v2.1.1. We will get a fixed version
Bummer about Icom bug. For what it's worth, I compiled it fine just now on
Debian Linux 10.x + Kenwood TS-590, split mode. No additional dependencies
were needed since 2.1.0. Haven't tested much yet, but haven't seen any issues
so far.
73, KD0KZE / Paul
> On November 25, 2019 at 6:15 PM
22 matches
Mail list logo
