Hi Jon and Uwe,
On 6/14/2019 16:10, KM8V wrote:
For what it's worth, my experience matches David's.
Multiple times I tried to "arm" Best S+P and it never called anyone, despite
eligible stations calling CQ being decoded.
On 6/14/2019 16:22, DG2YCB, Uwe wrote:
Same experience here. Best
Same experience here. Best S+P never ever called anyone!
73 de Uwe, DG2YCB
Von: Jon Anhold [mailto:j...@anhold.com]
Gesendet: Freitag, 14. Juni 2019 22:11
An: WSJT software development
Betreff: Re: [wsjt-devel] Best S+P button
For what it's worth, my experience matches David's.
For what it's worth, my experience matches David's.
Multiple times I tried to "arm" Best S+P and it never called anyone,
despite eligible stations calling CQ being decoded.
73 de KM8V
On Fri, Jun 7, 2019 at 2:07 PM David Kaplan via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Thanks
Because the ALC meter is related to other things besides just power level like
audio level input.
ALC is a protection circuit ALC overshoot is a common problem (and not good for
electrical components)
And if you can get 90W without ALC why push it?
I just did this on my old IC-706MKIIG and can
nothi.g more nothing less, it just indicates that any deflection in the ALC
zone is ok.
And that is contrary to the beliefs some specialists here state.
I believe the manufacturer and the manuals more.
On Fri, 14 Jun 2019, 13:56 Tom M0LTE, wrote:
> How is this any more complicated than set
Folks,
ALC is a form of non-linear distortion of the signal being transmitted
(compression).
Although the WSJT-X suite is basically single-tone modulation, the effects of
ALC action will be minimal.
ALC (or the lack of it) is required for the linear soundcard modes like PSK31
where the
How is this any more complicated than set rig TX power to 100%, connect a
dummy load, then reduce audio drive level so power meter reads less than
100% in the middle of the passband?
Tom M0LTE
On Fri, 14 Jun 2019 at 07:39, Roeland Jansen
wrote:
> "However, the action of ALC meter depends on
Wow, that's one for the scrap book!
Looks more like an alien space invaders game show!
Ken.. G0ORH
Sent from my iPad
> On 14 Jun 2019, at 08:49, Carlos Fonseca wrote:
>
> Hello.
>
> In all digital modes, I try to use in max, only 2 bars on ALC meter.
>
> Reino Talarmo escreveu em sex,
"However, the action of ALC meter depends on balance between the modulation
level setting of your transceiver and the audio output level of your PC.
Please adjust them with seeing the ALC meter.
As you already know, if the ALC meter indicates within the ALC zone, there
is no problem.
Best
