--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W
3cms 5W
Maidenhead QRA
wrote:
Yes please,
Mode: PI4
With the ODROID C1 and other ARM low power boards being available,
remote receiving sites can do a lot under 10W.
Me, Banana Pi with a SATA disk.
http://rudius.net/oz2m/ngnb/pi4.htm
Alan VK2ZIW
On Mon, 19 Jan 2015 19:55:26 +, Richard Bown wrote
the benefits of such and only
support the Gates
brigade.
It would be very useful for monitoring beacons that use that mode, especially
for the nix users.
thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
On Tue, 5 May 2015 16:36:45 +0100
Richard Bown rich...@g8jvm.com wrote:
Hi
Are there some where PPAs usable ubuntu , linuxmint ect containing wsjt10,
I went to compile the latest and I'm getting a few probs where I've a mix of
python2.7 and 3.4 ( I
think) on my machines, the last build I
that are looking at smaller hardware
Thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms
* in to it ran make and a
working executable
appeared in the bin directory
I looks quite nice
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
to produce the audio tones from a PIC, or the alternative a
small headless ARM SBC ?
A PIC would be ideal as I could embed it in the transceiver, no need to decode
anything, if I'm
lucky enough to get heard , I can just use the shack computer .
--
--
Best wishes /73
Richard Bown
Email : rich
On Sat, 29 Aug 2015 10:47:26 +0100
Richard Bown rich...@g8jvm.com wrote:
On Sat, 29 Aug 2015 03:13:45 +0200
Håken Hveem krbjh...@online.no wrote:
Ok, i have tried to build it with jtsdk, and that results in exactly the
same sample rate related bug.
snip
Hej Haaken
If you still have
, Richard Bown wrote:
Edit the Makefile
change the python and f2py lines to this:-
# WSJT specific Fortran flags
FFLAGS += -O2 -fbounds-check -fno-second-underscore -Wall
-Wno-conversion
-Wno-character-truncation CFLAGS += -I. -DBIGSYM
-DHAVE_STRUCT_TIMESPEC
nd right stereo
> > along with a 11.025kHz sample rate. This may be possible using ALSA
> > configuration (~/.asoundrc) or maybe by using pulseaudio which has
> > advanced virtual device construction and an ALSA backend capability so
> > could be accessed via the portaudio l
device 7 failed a request for two channels, trying with one channel
> Error opening input audio stream.
> Errortext: Invalid sample rate
> Number: -9997
> Error opening output audio stream.
> Errortext: Invalid sample rate
> Number: -9997
> Error 3 in JTaudio, you will only be abl
interface problem.
>
> Den 31. aug. 2015 13:51, skrev Richard Bown:
> > On Mon, 31 Aug 2015 13:36:59 +0200
> > Håken Hveem <krbjh...@online.no> wrote:
> >
> >> Here is the error messages from my attempt to run WSJT from
On Tue, 29 Dec 2015 14:13:49 +
Bill Somerville <g4...@classdesign.com> wrote:
> On 29/12/2015 14:00, Richard Bown wrote:
> > Just the audio card to sort out, if Hardkernel don't produce an audio
> > card,can a USB audio card
> > be recommended that wont break t
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W
Maidenhead QRA: IO82SP38, LAT
than the Raspberry PI2
My main use is MS FSK441
Thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwa
orks on ARMv7 distros like Ubuntu Mate etc, and I've had
> feedback from a couple users about successful Superbuilds. If your
> compiling any of the WSJT apps, you'll want to have a descent size swap
> enabled ~1GB at least.
>
>
> 73's
> Greg, KI7MT
>
> On 12/29/201
Hi all
I was asked by a friend who uses wspr-15 on LF about wsjtx
I see on the menu its greyed out, what the position on this mode ?
is it work in progress or have I missed a s/w switch for it ?
Thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
apparently its quite popular on the LF bands , not that I use them Joe, I tend
to stay on bands
where the minimum usable antenna gain is 10dB.
>
> On 11/20/2015 9:49 AM, Richard Bown wrote:
> > Hi all
> > I was asked by a friend who uses wspr-15 on LF about wsjtx
>
ort faster gaming
and windows bloatware, not really what Hams interested in very weak signal work
want in the shack
IMO
Thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a i
gives the
unsupported message.
on the manual build I downloaded the trunk with svn , ran .configure and then
make
I'll look at the Makefile and see if I can force the use of python3-numpy and
not python2-numpy
I'll attack the makefile and let you know the progress
Thanks
>
>
> On 1/10/2
On Sun, 10 Jan 2016 15:44:53 +
Richard Bown <rich...@g8jvm.com> wrote:
> On Sun, 10 Jan 2016 08:11:28 -0700
> Greg Beam <ki7m...@gmail.com> wrote:
>
> > Hi Richard,
> >
> > The PyCObject_Type error and the error your getting when trying to run
>
ac
PYTHON ?= /usr/bin/python3
F2PY?= /usr/bin/f2py3.4
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8J
JTSDK, I'm not worried about having to edit the
Makefile, that a minor
thing, but it would be useful to see if the auto build still gets python memory
hogging.
Thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
much, but I was under
the impression
that the originator of the question may not of understood the full process.
BTW I still use dttsp and SDR-shell, IMO it still is one the best for detecting
the presence of a
signal below ear detection threshold.
--
--
Best wishes /73
Richard Bown
Em
demodulator,
ie audio.
Just connect it and select either one of the audio o/ps from the softrock.
HTH
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
to shell are usable
with a network
connection between. there is a separate yahoo group for this.
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham
On Fri, 15 Jan 2016 14:23:48 -0200
"Edson W. R. Pereira" <ewpere...@gmail.com> wrote:
> On Fri, Jan 15, 2016 at 11:31 AM, Richard Bown <rich...@g8jvm.com> wrote:
>
> >
> > You can feed a SDR with just an single audio feed and you will see the
> &g
lat, see man apt and man apt-get.
I've guessed you are running raspberian .
HTH
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM
ick G3VNC
>
>
>
Hi Nick
try the "dttsp-linux" yahoo group , there was activity on the list last in
October.
I cant remember the name of the group supporting the follow on project.
HTH
--
--
Best wishes /73
On Wed, 13 Jan 2016 21:41:59 +
Bill Somerville <g4...@classdesign.com> wrote:
> On 13/01/2016 21:28, Richard Bown wrote:
> > Therefore, IHO, its better to use a QEMU VM on a linux host and know your
> > code works, than to
> > just cross compile and hope it works.
it works.
Asbestos pants donned ready :)
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 2
On Wed, 13 Jan 2016 22:23:48 +
Bill Somerville <g4...@classdesign.com> wrote:
> On 13/01/2016 22:10, Richard Bown wrote:
> > I'm not going to get in to argument over it Bill.
> > But if you want to open WSJTX up to everyone with a tablet cross compile
> > and
fazer coisas incríveis se
> trabalharmos juntos.
>
> On Wed, Jan 13, 2016 at 9:15 PM, Richard Bown <rich...@g8jvm.com> wrote:
>
> > On Wed, 13 Jan 2016 22:23:48 +
> > Bill Somerville <g4...@classdesign.com> wrote:
> >
> > > On 13/01/2016
>
> 73
> Bill
> G4WJS.
Hi Bill you could try this:-
https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Virtual_ARM_Linux_environment
HTH
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Paul m1bkl
Yes it should be OK , wsjtx and wspr will build and run, so does Hamlib
but wsjt10 is too heavy on resources for a Rasp Pi2'
Runs OK on a Odroid XU4, sorta super rasp Pi2;
Should you need high speed modes, until they are added here you can use MSHV,
PM me for the
MSHV_ARMHF.pro file to bui
On Wed, 13 Jan 2016 16:58:07 +
Bill Somerville <g4...@classdesign.com> wrote:
> On 13/01/2016 16:52, Richard Bown wrote:
> > Hi Bill you could try this:-
> > https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Virtual_ARM_Linux_environment
> Hi Richard,
and Apple. Enough for Gigabyte to produce their
Brix range of tiny
computers.
Maybe I'm just a dinosaur, I see a good shack as real radios and loads of test
equipment with
tools and a soldering iron, not a desk with a tiny commercial radio a computer
and half a dozen
monitors attached to it
--
--
able.
The only difference between the raspPI2 and the Odroid C1+ is the quad
processor runs at 1.6 GHz
compared to 900 MHz for the R PI2, same RAM 1 GB.
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http:
Not much point staying on a list like this :(
On Sun, 17 Jan 2016 08:27:48 -0700
Greg Beam <ki7m...@gmail.com> wrote:
> Hi Richard,
>
> On 1/17/2016 03:44, Richard Bown wrote:
> >
> >
> >
> > We seem to have a literacy problem on this list which
0 2 spdif
> 15 32 32 pulse
> 16 0 2 dmix
> 17 32 32 default
>
> User requested devices: Input = 18 Output = 18
> Default devices: Input = 17 Output = 17
> Will open devices:
tions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
>
pp.o] Error 1
CMakeFiles/Makefile2:936: recipe for target 'CMakeFiles/wsjtx.dir/all' failed
make[1]: *** [CMakeFiles/wsjtx.dir/all] Error 2
Makefile:136: recipe for target 'all' failed
make: *** [all] Error 2
OS Ubuntu 15.03
anything obvious ?
Hamlib builds OK
--
--
Best wishes /73
Richard
Reply at end
On Thu, 7 Apr 2016 20:33:41 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 07/04/2016 20:08, Richard Bown wrote:
> > Hi
> > WSJTX 1.5 & 1.6 no longer building on a ARMHF 32 bit plaform:-
> >
> > /usr/include/arm-linux-gnueabihf/qt
On Mon, 23 May 2016 22:26:34 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 23/05/2016 22:02, Richard Bown wrote:
> > is there any way of increasing the speed of the waterfall display.
>
> Hi Richard,
>
> the basic FFT unit (time interval) is not user ad
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W
Maidenhead
. :)
On Mon, 23 May 2016 23:01:16 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 23/05/2016 22:45, Richard Bown wrote:
> > I've already taken that as low as possible, just wondered if anything
> > hackable ?
>
> Hi Richard,
>
> that would require reduci
2016 23:06:12 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 16/05/2016 22:50, Richard Bown wrote:
> > Its putting a tone on the unused audio channel when in Tx
> > So if data was on the Right channel, put an audio tone, doesn't matter what
> > frequency,
+0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 15/05/2016 22:12, Richard Bown wrote:
> > how difficult would it to add a tone PTT
>
> Hi Richard,
>
> can you explain that feature ple
is messy as you can end up hot switching RF, and it would avoid having to
use a USB/RS232
converter for PTT.
TIA
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
Bill Somerville <g4...@classdesign.com> wrote:
> On 15/04/2016 16:25, Richard Bown wrote:
> > where is the lock file stored when wsjtx is running ?
> > I'd like to change the screen resolution when running wsjtx and looking for
> > a file to test, as an alternative to
when it shuts down.
Or has some nice person left a point in the start up / shutdown sequence where
a custom command
could be inserted ?
Thanks
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
untu 64 bit mess with the
C2 :(
On Thu, 14 Apr 2016 19:54:07 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 14/04/2016 18:49, Richard Bown wrote:
> > I suspect that with QT5 and OpenGL ES out of sync that this is the end of
> > use of Odroid SBCs
> > wit
0
Bill Somerville <g4...@classdesign.com> wrote:
> On 14/04/2016 20:13, Richard Bown wrote:
> > very simple reason,
> > odroids use the Mali GPU and hence Opengl ES, its been passed back to
> > Hardkernel, as the
> > OpenGL ES compatibility issues are theirs &
et use these small SBC devices
> for WSPR. It may be worth posting there for further assistance.
>
> Link: http://wsprnet.org
>
> As a side note, Ubuntu 16.04 is approaching, maybe these QT5 / OpenGL ES
> issues will be resolved then.
>
>
> 73's
> Greg, KI7MT
&g
configure ???
or at least before make.
Tnx
On Thu, 14 Apr 2016 23:38:04 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 14/04/2016 23:30, Richard Bown wrote:
> > What does jtsdk look for when there is already an earlier version of wsjtx
> > built ?
>
the future Greg.
On Thu, 14 Apr 2016 16:03:26 -0600
KI7MT <ki...@yahoo.com> wrote:
> Hi Richard,
>
> See below.
>
> On 04/14/2016 03:53 PM, Richard Bown wrote:
> > OK Greg
> > qtmultmedia5-dev back in , its now deciding to fail:_
> > Verifying Fortran/CXX
; I've not updated the control file to allow for the new libusb-1.0-dev
> situation yet.
>
> 73's
> Greg, KI7MT
>
>
> On 04/14/2016 02:37 PM, Richard Bown wrote:
> > Hi
> > I've done a apt-get purge qt5*
> > then reinstalled qt5-default, 5.4.2,
> >
On Fri, 15 Apr 2016 17:43:18 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 15/04/2016 17:25, Richard Bown wrote:
> > Actually in /tmp:)
> Oops, sorry about that. %TMP% on Windows and $TMPDIR on Mac.
> > But as well as the lockfile, I also found /t
now and I'll try to amend them to be
> more user friendly.
>
>
> 73's
> Greg, KI7MT
>
>
> On 04/14/2016 05:10 PM, Bill Somerville wrote:
> > On 15/04/2016 00:00, Richard Bown wrote:
> >> So wouldn't it make sense to put in the automated build scripts a make
> &
that this is the end of use
of Odroid SBCs
with WSJTX, a great shame , it looks like those who like huge computers with
half a dozen monitors
have won :(
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
ot;minus infinity dB".
>
> Some people think it's a big deal when they see a JT65 decode displayed
> with an estimated S/N_dB of, say, "-30 dB". This is nothing more than a
> statistical fluctuation of n
qtmultimedia5-dev and libqt5serialport5-dev
missing sorry for the bandwidth
On Tue, 6 Dec 2016 13:47:47 +
Richard Bown <rich...@g8jvm.com> wrote:
> Hi
> like to try RC3, but hitting a problem on a ARM ubuntu linux platform, Odroid
> XU4 8 core.
> I does compile OK
imedia" to CMAKE_PREFIX_PATH or set
"Qt5Multimedia_DIR" to a directory containing one of the above files. If
"Qt5Multimedia" provides a separate development package or SDK, be sure it
has been installed.
How do you add a path in when using JTSDK to build, or work around this
TIA
--
;g4...@classdesign.com> wrote:
> On 09/12/2016 20:12, Richard Bown wrote:
> > Any chance of adding 70cms and 23 cms to the MSK144 pulldown, it does work
> > on those bands.
>
> Hi Richard,
>
> glad you have your new system running now.
>
> We do not add many wo
s the PTT via serial port function being phased out as
most use shiney black
boxes that have CAT control ?
TIA
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carbo
Dec 2016 18:49:07 +
Bill Somerville <g4...@classdesign.com> wrote:
> sudo adduser $USER dialout
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a il
Richard Bown <rich...@g8jvm.com> wrote:
> this is not responding to deleting all previous builds and gar/
>
> tried that several times :(
>
>
> On Tue, 6 Dec 2016 21:49:32 +
> Bill Somerville <g4...@classdesign.com> wrote:
>
> > On 06/12/2016 21
ec 6, 2016 at 9:48 AM, Richard Bown <rich...@g8jvm.com> wrote:
>
> > qtmultimedia5-dev and libqt5serialport5-dev
> >
> > missing sorry for the bandwidth
> >
> >
> > On Tue, 6 Dec 2016 13:47:47 +
> > Richard Bown <rich...@g8jvm.com> w
your platform today.http://sdm.link/xeonphi
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http:
016 10:05:27 +0000
Richard Bown <rich...@g8jvm.com> wrote:
> Hi Greg
> I dont doubt the rc3 builds are OK, I downloaded your build for armhf this
> morning and it runs.
>
> All I get reported on startup is unable to initialise openGLfor
> RasterGLSurface, reverting to
>
> I'm not seeing detailed output, try:
>
> make VERBOSE=1
>
> and see if you get more useful output.
>
> Thanks,
> Richard
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
On 09/12/2016 19:21, Richard Bown wrote:
> > It wasn't , but it hasn't made any difference, I've restarted several times
> >
>
> Hi Richard,
>
> restarted WSJT-X? You must log out and log in again for the changed
> group membership t
Hi
Just upgraded to linux mint 18.1 , no build problems and WSJT-X seems OK
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call
CMakeFiles/wsjt_qt.dir/SampleDownloader.cpp.o -c
/home/odroid/jtsdk/src
Unfortunately none the wiser from that :(
On Tue, 6 Dec 2016 13:43:10 -0600
Richard Shaw <hobbes1...@gmail.com> wrote:
> On Tue, Dec 6, 2016 at 1:19 PM, Richard Bown <rich...@g8jvm.com> wrote:
>
> >
:01:51 +
Bill Somerville <g4...@classdesign.com> wrote:
> On 06/12/2016 16:28, Richard Bown wrote:
> > Yes, that got me past that stage but I've hit problems further on
> > when building UDPEamples
> >
> > [ 78%] Linking CXX executable udp_daemon
> > CMake
this is not responding to deleting all previous builds and gar/
tried that several times :(
On Tue, 6 Dec 2016 21:49:32 +
Bill Somerville <g4...@classdesign.com> wrote:
> On 06/12/2016 21:29, Richard Bown wrote:
> > I suspect the problem may be with opengl
> > comp
on WSJTX is greatly appreciated, thanks
--
--
Best Seasonal wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave
Hiya
There is one huge difference between wsjtx and all the other clones and so
called better systems.
You can run wsjtx and wsjt on all platforms.
Thats very important and demomstrates a highly professional approach to
providing for all user.
Long may it continue and thanks for developing
ignore, Bill posted same time
On Sat, 29 Jul 2017 18:09:11 +0100
Richard Bown <rich...@g8jvm.com> wrote:
> Hi Gary
> there are two ways to get around this
>
> when you build hamlib use the switches to set the install to where the wsjtx
> build i
; to:
>
> use ccmake to set the missing variables manually.
> Call Stack (most recent call first):
> CMake/Modules/Findhamlib.cmake:69 (libfind_process)
> CMakeLists.txt:848 (find_package)
>
> Any suggestions as to how to resolve?
>
> Thanks Gary KO3F
>
>
>
--
--
B
Are there any plans to develop a faster mode than MSK144 to use for UHF MS ?
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call
Its not entirely Off limit on this reflector
Its the dev list for weak signal applications.
However, FT8 is being used as a mode of preference, when a QSO could easily be
completed on SSB or
CW.
How about adding a feature that would put a BIG red screen splash up when
signals exceed a certain
most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.
nion leave cw ident out.
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 1
rge.net
> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/sl
ow for 5% of entries to have complex callsigns .
>
>
> On Fri, 28 Jul 2017 16:18:29 -0400
> Joe Taylor <j...@princeton.edu> wrote:
>
> > On 7/28/2017 4:03 PM, Richard Bown wrote:
> > > It could be a considerable amount Joe, Some countries in region 1 are
>
st that contains some hundreds of QSOs. Do you have one?
>
> -- Joe, K1JT
>
> On 7/28/2017 5:01 PM, Richard Bown wrote:
> > A further note
> > Ians log was I suspect from N W Europe, if you draw a circle of 1000kms
> > centred on Rome , ,
> > Italy,
lto:wsjt-devel@lists.sourceforge.net>
> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> > <https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
> >
> >
> >
> >
> &g
list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##
tle cooler.
The UK is getting the reputation of the RF black hole of Europe.
It would be nice when I'm not using equipment to put it in beacon mode and send
some RF out of the
hole.
Thanks
--
Best wishes /73
Richard Bown
Email : rich...@g8jvm.com
B" as a legitimate entry in
the report field to
indicate you are in beacon mode.
Thanks
On Wed, 9 Aug 2017 21:51:05 +0100
Bill Somerville <g4...@classdesign.com> wrote:
> On 09/08/2017 21:31, Richard Bown wrote:
> > I'd like to use JT4 in beacon mode on the microwave bands,
91 matches
Mail list logo