Having RTFM here are my comments.
2 System Requirements says time ....UTC within ±1 second. Is this good
enough with FT8 which I believe needs an end to end error of less than 1.5
seconds so each end ought to be within 0.75 seconds.
4.7 Colors
Somebody raised the issue of how to identify Worked Before stations. I replied
direct that it's the green ones but from the guide and the config screen this
is not made clear.
From program behaviour I believe the label for Green should be "CQ Worked B4"
and the Purple and Magenta should also have CQ in front of their descriptions.
For me the Green is too bright a choice for something that should be of low
interest, and should be Grey ( or Gray) to be in line with JTALERT but since
it is re-configurable I guess it is a personal choice.
7.1 "I" paragraph has information on sensitivity of JT9 and JT65 but nothing
for FT8.
8.1 VHF setup. Should this section remind us that the decoder will only spot
one signal at a time" when in "VHF mode". I had missed that point in the past.
19 Utility Programs
No mention of FT8 in this section. Should it be listed even if to say not
available at this time.
Bob Thornton G3WKW
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel