Re: [xcat-user] Making nodes IPs static

2017-04-06 Thread Yuan Y Bai 
The related doc is here:
http://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/ppc64le/diskful/customize_image/cfg_second_adapter.html


Best Regards
--
Yuan Bai (白媛)

CSTL HPC System Management Development
Tel:86-10-82451401
E-mail: by...@cn.ibm.com
Address: IBM ZGC Campus. Ring Building 28,
 ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian
District,
 Beijing P.R.China 100193

IBM环宇大厦
北京市海淀区东北旺西路8号，中关村软件园28号楼
邮编:100193



From:   Christian Caruthers <ccaruth...@lenovo.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date:   04/04/2017 01:15 AM
Subject:    Re: [xcat-user] Making nodes IPs static



If your hosts have a single interface, hardeths will do the trick w/o any
additional configuration changes. If your nodes have multiple interfaces,
you can use "confignics -s" (man confignics) and omit hardeths. To use
confignics, you'll need to configure the nics table (man nics)

Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872



-Original Message-
From: David Rajendra [mailto:drajen...@lenovo.com]
Sent: Monday, April 3, 2017 8:02 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] Making nodes IPs static

Hello Hakan,

I can answer your first question:

You can use the xCAT  "hardeths" postscript to achieve this.
(It is located in /install/postscripts).

This will make the DHCP assigned IP address static Add this post script to
the xCAT postcripts table for your node/nodegroup definition.

Regards,

David



-Original Message-
From: Hakan Bayındır [mailto:hakan.bayin...@tubitak.gov.tr]
Sent: Monday, April 3, 2017 9:27 AM
To: xCAT User Mailing List
Subject: [xcat-user] Making nodes IPs static

Hello all,

I'm taking last steps to take our xCAT installation to production. I'm
working on making the IP addresses static on the hosts.

The DHCP server is assigning IPs as it should, however our management
policy requires that the nodes shall have static IPs after complete
installation.

Does xCAT has a feature for this, or should I write a small script for
this.

Also, as far as I can tell, xCAT allows nodes to talk with master's DB
about its details. Is there any documentation for this?

Best regards,

Hakan Bayindir

--
*Hakan BAYINDIR*
Uzman Araştırmacı
Ağ Teknolojileri Birimi
YÖK Binası B-5 Blok Kat:4
06539 Bilkent Ankara
T +90 312 298 9373
F +90 312 266 5181
www.ulakbim.gov.tr <http://www.ulakbim.gov.tr>
hakan.bayin...@tubitak.gov.tr 



<http://www.tubitak.gov.tr>

Sorumluluk Reddi <http://www.tubitak.gov.tr/sorumlulukreddi>

--

Check out the vibrant tech community on one of the world's most engaging
tech sites, Slashdot.org! http://sdm.link/slashdot
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
--

Check out the vibrant tech community on one of the world's most engaging
tech sites, Slashdot.org! http://sdm.link/slashdot
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
--

Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Re: [xcat-user] Making nodes IPs static

2017-04-04 Thread Hakan Bayındır 
Hi all,

Thanks for all your answers, I will take a look.

Cheers,

Hakan


On 04/03/2017 08:13 PM, Christian Caruthers wrote:
> If your hosts have a single interface, hardeths will do the trick w/o any 
> additional configuration changes. If your nodes have multiple interfaces, you 
> can use "confignics -s" (man confignics) and omit hardeths. To use 
> confignics, you'll need to configure the nics table (man nics)
>
> Regards,
> Christian Caruthers
> Lenovo xESS IT Consultant
> Mobile: 757-289-9872
>
>
>
> -Original Message-
> From: David Rajendra [mailto:drajen...@lenovo.com] 
> Sent: Monday, April 3, 2017 8:02 AM
> To: xCAT Users Mailing list
> Subject: Re: [xcat-user] Making nodes IPs static
>
> Hello Hakan,
>
> I can answer your first question:
>
> You can use the xCAT  "hardeths" postscript to achieve this. 
> (It is located in /install/postscripts).
>
> This will make the DHCP assigned IP address static Add this post script to 
> the xCAT postcripts table for your node/nodegroup definition.
>
> Regards,
>
> David
>
>
>
> -Original Message-
> From: Hakan Bayındır [mailto:hakan.bayin...@tubitak.gov.tr]
> Sent: Monday, April 3, 2017 9:27 AM
> To: xCAT User Mailing List
> Subject: [xcat-user] Making nodes IPs static
>
> Hello all,
>
> I'm taking last steps to take our xCAT installation to production. I'm 
> working on making the IP addresses static on the hosts.
>
> The DHCP server is assigning IPs as it should, however our management policy 
> requires that the nodes shall have static IPs after complete installation.
>
> Does xCAT has a feature for this, or should I write a small script for this.
>
> Also, as far as I can tell, xCAT allows nodes to talk with master's DB about 
> its details. Is there any documentation for this?
>
> Best regards,
>
> Hakan Bayindir
>
> --
> *Hakan BAYINDIR*
> Uzman Araştırmacı
> Ağ Teknolojileri Birimi
> YÖK Binası B-5 Blok Kat:4
> 06539 Bilkent Ankara
> T +90 312 298 9373
> F +90 312 266 5181
> www.ulakbim.gov.tr <http://www.ulakbim.gov.tr> hakan.bayin...@tubitak.gov.tr 
> 
>
> <http://www.tubitak.gov.tr>
>
> Sorumluluk Reddi <http://www.tubitak.gov.tr/sorumlulukreddi>
>
> --
> Check out the vibrant tech community on one of the world's most engaging tech 
> sites, Slashdot.org! http://sdm.link/slashdot 
> ___
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
> --
> Check out the vibrant tech community on one of the world's most engaging tech 
> sites, Slashdot.org! http://sdm.link/slashdot 
> ___
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user

-- 
*Hakan BAYINDIR*
Uzman Araştırmacı
Ağ Teknolojileri Birimi
YÖK Binası B-5 Blok Kat:4
06539 Bilkent Ankara
T +90 312 298 9373
F +90 312 266 5181
www.ulakbim.gov.tr <http://www.ulakbim.gov.tr>
hakan.bayin...@tubitak.gov.tr


<http://www.tubitak.gov.tr>

Sorumluluk Reddi <http://www.tubitak.gov.tr/sorumlulukreddi>

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Re: [xcat-user] Making nodes IPs static

2017-04-03 Thread David Rajendra 
Hello Hakan,

I can answer your first question:

You can use the xCAT  "hardeths" postscript to achieve this. 
(It is located in /install/postscripts).

This will make the DHCP assigned IP address static
Add this post script to the xCAT postcripts table for your node/nodegroup 
definition.

Regards,

David



-Original Message-
From: Hakan Bayındır [mailto:hakan.bayin...@tubitak.gov.tr] 
Sent: Monday, April 3, 2017 9:27 AM
To: xCAT User Mailing List
Subject: [xcat-user] Making nodes IPs static

Hello all,

I'm taking last steps to take our xCAT installation to production. I'm working 
on making the IP addresses static on the hosts.

The DHCP server is assigning IPs as it should, however our management policy 
requires that the nodes shall have static IPs after complete installation.

Does xCAT has a feature for this, or should I write a small script for this.

Also, as far as I can tell, xCAT allows nodes to talk with master's DB about 
its details. Is there any documentation for this?

Best regards,

Hakan Bayindir

--
*Hakan BAYINDIR*
Uzman Araştırmacı
Ağ Teknolojileri Birimi
YÖK Binası B-5 Blok Kat:4
06539 Bilkent Ankara
T +90 312 298 9373
F +90 312 266 5181
www.ulakbim.gov.tr <http://www.ulakbim.gov.tr> hakan.bayin...@tubitak.gov.tr 


<http://www.tubitak.gov.tr>

Sorumluluk Reddi <http://www.tubitak.gov.tr/sorumlulukreddi>

--
Check out the vibrant tech community on one of the world's most engaging tech 
sites, Slashdot.org! http://sdm.link/slashdot 
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

[xcat-user] Making nodes IPs static

2017-04-03 Thread Hakan Bayındır 
Hello all,

I'm taking last steps to take our xCAT installation to production. I'm
working on making the IP addresses static on the hosts.

The DHCP server is assigning IPs as it should, however our management
policy requires that the nodes shall have static IPs after complete
installation.

Does xCAT has a feature for this, or should I write a small script for this.

Also, as far as I can tell, xCAT allows nodes to talk with master's DB
about its details. Is there any documentation for this?

Best regards,

Hakan Bayindir

-- 
*Hakan BAYINDIR*
Uzman Araştırmacı
Ağ Teknolojileri Birimi
YÖK Binası B-5 Blok Kat:4
06539 Bilkent Ankara
T +90 312 298 9373
F +90 312 266 5181
www.ulakbim.gov.tr 
hakan.bayin...@tubitak.gov.tr




Sorumluluk Reddi 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user