hw-detect (1.117ubuntu1) xenial; urgency=low * Merge 1.117 from debian to pick up fix for LP: #1559193.
* Resynchronise with Debian. Remaining changes: - Add an 'archdetect-deb' package, containing /usr/bin/archdetect. Add an archdetect(1) manual page. - Add support for activating fakeraid devices with mdadm. - disk-detect.sh: Do not check the kernel command line for any option to enable dmraid support. If functional dmraid arrays are found, the user will be asked if they wish to activate them. - 'dmraid -c -s' changed its output format; cope with both old and new. - Make dmraid logging a bit neater. - Offer iSCSI targets for preseeding if partman-iscsi is available and no disk devices are found. - disk-detect.sh: Use mpath[a-z] now rather than mpath[0-9] to identify multipath devices and thus know to install partman-multipath. - disk-detect.sh: run update-dev after installing multipath and sg3. - debian/control: Depends on multipath-udeb (>= 0.5.0), which introduces the multipath device naming changes above. - Remove dm-emc from the multipath modules, since it's gone since 2.6.27. - Improve checks for dm-* drivers being present to avoid relying on them being built as modules. - Bump question to load driver injection disk from medium to high, and raise driver-injection-disk package priority to standard. Thus the udeb will be loaded by default, but before installing any debs from the OEMDRV a confirmation question will be asked (default true, can be pre-seeded) - Drop priorities of a couple of ethdetect questions to medium. - Exit zero if you continue all the way through ethdetect's errors about having no network interfaces. - Remove FireWire Ethernet support. - disk-detect.sh: multipath: reload udev rules before re-add devices to guarantee all devices may get new udev properties - disk-detect.sh: multipath: deactivate LVM volumes before multipath discovery to unlock individual paths - disk-detect.sh: multipath: deactivate md arrays before multipath discovery to unlock individual paths - disk-detect.sh: use iscsi-start wrapper in partman-iscsi to be able to set a custom iSCSI initiatorName from the installer. - disk-detect.sh: load SCSI device handlers before SCSI low-level device drivers. hw-detect (1.117) unstable; urgency=medium * Team upload [ Hendrik Brueckner ] * Improve and split harddrive detection into DASD and SCSI dependency on s390x (Closes: #818586) hw-detect (1.116) unstable; urgency=medium [ Colin Watson ] * Use HTTPS for Vcs-* URLs, and link to cgit rather than gitweb. hw-detect (1.115) unstable; urgency=medium [ Colin Watson ] * Compress devnames-static.gz using "gzip -n" (Lintian). Date: Mon, 04 Apr 2016 14:37:02 +0100 Changed-By: Dimitri John Ledkov <x...@ubuntu.com> Maintainer: Ubuntu Installer Team <ubuntu-instal...@lists.ubuntu.com> https://launchpad.net/ubuntu/+source/hw-detect/1.117ubuntu1
Format: 1.8 Date: Mon, 04 Apr 2016 14:37:02 +0100 Source: hw-detect Binary: hw-detect ethdetect disk-detect driver-injection-disk-detect archdetect archdetect-deb Architecture: source Version: 1.117ubuntu1 Distribution: xenial Urgency: medium Maintainer: Ubuntu Installer Team <ubuntu-instal...@lists.ubuntu.com> Changed-By: Dimitri John Ledkov <x...@ubuntu.com> Description: archdetect - Hardware architecture detector (udeb) archdetect-deb - Hardware architecture detector disk-detect - Detect disk drives (udeb) driver-injection-disk-detect - Detect OEM driver injection disks (udeb) ethdetect - Detect network hardware and load kernel drivers for it (udeb) hw-detect - Detect hardware and load kernel drivers for it (udeb) Closes: 818586 Launchpad-Bugs-Fixed: 1559193 Changes: hw-detect (1.117ubuntu1) xenial; urgency=low . * Merge 1.117 from debian to pick up fix for LP: #1559193. . * Resynchronise with Debian. Remaining changes: - Add an 'archdetect-deb' package, containing /usr/bin/archdetect. Add an archdetect(1) manual page. - Add support for activating fakeraid devices with mdadm. - disk-detect.sh: Do not check the kernel command line for any option to enable dmraid support. If functional dmraid arrays are found, the user will be asked if they wish to activate them. - 'dmraid -c -s' changed its output format; cope with both old and new. - Make dmraid logging a bit neater. - Offer iSCSI targets for preseeding if partman-iscsi is available and no disk devices are found. - disk-detect.sh: Use mpath[a-z] now rather than mpath[0-9] to identify multipath devices and thus know to install partman-multipath. - disk-detect.sh: run update-dev after installing multipath and sg3. - debian/control: Depends on multipath-udeb (>= 0.5.0), which introduces the multipath device naming changes above. - Remove dm-emc from the multipath modules, since it's gone since 2.6.27. - Improve checks for dm-* drivers being present to avoid relying on them being built as modules. - Bump question to load driver injection disk from medium to high, and raise driver-injection-disk package priority to standard. Thus the udeb will be loaded by default, but before installing any debs from the OEMDRV a confirmation question will be asked (default true, can be pre-seeded) - Drop priorities of a couple of ethdetect questions to medium. - Exit zero if you continue all the way through ethdetect's errors about having no network interfaces. - Remove FireWire Ethernet support. - disk-detect.sh: multipath: reload udev rules before re-add devices to guarantee all devices may get new udev properties - disk-detect.sh: multipath: deactivate LVM volumes before multipath discovery to unlock individual paths - disk-detect.sh: multipath: deactivate md arrays before multipath discovery to unlock individual paths - disk-detect.sh: use iscsi-start wrapper in partman-iscsi to be able to set a custom iSCSI initiatorName from the installer. - disk-detect.sh: load SCSI device handlers before SCSI low-level device drivers. . hw-detect (1.117) unstable; urgency=medium . * Team upload . [ Hendrik Brueckner ] * Improve and split harddrive detection into DASD and SCSI dependency on s390x (Closes: #818586) . hw-detect (1.116) unstable; urgency=medium . [ Colin Watson ] * Use HTTPS for Vcs-* URLs, and link to cgit rather than gitweb. . hw-detect (1.115) unstable; urgency=medium . [ Colin Watson ] * Compress devnames-static.gz using "gzip -n" (Lintian). Checksums-Sha1: 5f2f1bc6ceb30d977f310ae0230800daa86e349e 1909 hw-detect_1.117ubuntu1.dsc 9343a73978301b1d1be09a9db0f830412b404496 192984 hw-detect_1.117ubuntu1.tar.xz Checksums-Sha256: 786a4baf6d5ee6103e43f91b9ed3e3d04e283341f4b9d99be38d53595eb623e8 1909 hw-detect_1.117ubuntu1.dsc 32dedb08047fb8f95513c1a65d6ece97a165f103a7049d627d3e5fea2aeb8135 192984 hw-detect_1.117ubuntu1.tar.xz Files: 272ffd07e8ee59f88adbc44f5a2642fd 1909 debian-installer standard hw-detect_1.117ubuntu1.dsc 0bef2de1ff9a1c1c051ba82febeff69d 192984 debian-installer standard hw-detect_1.117ubuntu1.tar.xz Original-Maintainer: Debian Install System Team <debian-b...@lists.debian.org>
-- Xenial-changes mailing list Xenial-changes@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/xenial-changes