nplan (0.29~16.04.1) xenial; urgency=medium
* Backport netplan 0.29 to 16.04. (LP: #1713142)
* debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
feature backported in that revision.
nplan (0.29) artful; urgency=medium
* Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.
nplan (0.28) artful; urgency=medium
* Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
* Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)
nplan (0.27) artful; urgency=medium
[ Mathieu Trudel-Lapierre ]
* Fix crash in systemd generator if called by an user on the command-line.
(LP: #1714267)
* coverage: fix exclusions to properly not cover our "never reached defaults"
[ Dimitri John Ledkov ]
* tests/integration.py: In teardown, stop systemd-networkd.socket.
* src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
* tests/integration.py: fix resolved detection.
nplan (0.26) artful; urgency=medium
* Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
* Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
rebind. (LP: #1712224)
* Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
being around and enabled when we restart the service; but we don't need
to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
networkd autostarts or not, but we need to make sure that our generator
will run at boot, so instead check the state, but only assert it once
we've added a config file and before checking the state of our dummy
device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
as reliable as possible; by setting saner defaults.
nplan (0.25) artful; urgency=medium
* tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
* tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
* src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
* src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
* src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
configured; this follows the same logic as setting IPv6AcceptRA=no in
networkd, with the exception that NM does not currently disable RAs. When
it does, an unconfigured device for IPv6 will truly be left with no config.
nplan (0.24) artful; urgency=medium
* debian/control: set Priority to important to make sure we can get into
minimal.
Date: Tue, 26 Sep 2017 14:08:21 -0400
Changed-By: Mathieu Trudel-Lapierre <cypher...@ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-disc...@lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/nplan/0.29~16.04.1
Format: 1.8
Date: Tue, 26 Sep 2017 14:08:21 -0400
Source: nplan
Binary: nplan
Architecture: source
Version: 0.29~16.04.1
Distribution: xenial
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-disc...@lists.ubuntu.com>
Changed-By: Mathieu Trudel-Lapierre <cypher...@ubuntu.com>
Description:
nplan - YAML network configuration abstraction for various backends
Launchpad-Bugs-Fixed: 1655440 1699371 1709135 1712224 1713142 1714267 1717404
1717471
Changes:
nplan (0.29~16.04.1) xenial; urgency=medium
.
* Backport netplan 0.29 to 16.04. (LP: #1713142)
* debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
feature backported in that revision.
.
nplan (0.29) artful; urgency=medium
.
* Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.
.
nplan (0.28) artful; urgency=medium
.
* Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
* Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)
.
nplan (0.27) artful; urgency=medium
.
[ Mathieu Trudel-Lapierre ]
* Fix crash in systemd generator if called by an user on the command-line.
(LP: #1714267)
* coverage: fix exclusions to properly not cover our "never reached defaults"
.
[ Dimitri John Ledkov ]
* tests/integration.py: In teardown, stop systemd-networkd.socket.
* src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
* tests/integration.py: fix resolved detection.
.
nplan (0.26) artful; urgency=medium
.
* Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
* Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
rebind. (LP: #1712224)
* Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
being around and enabled when we restart the service; but we don't need
to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
networkd autostarts or not, but we need to make sure that our generator
will run at boot, so instead check the state, but only assert it once
we've added a config file and before checking the state of our dummy
device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
as reliable as possible; by setting saner defaults.
.
nplan (0.25) artful; urgency=medium
.
* tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
* tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
* src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
* src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
* src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
configured; this follows the same logic as setting IPv6AcceptRA=no in
networkd, with the exception that NM does not currently disable RAs. When
it does, an unconfigured device for IPv6 will truly be left with no config.
.
nplan (0.24) artful; urgency=medium
.
* debian/control: set Priority to important to make sure we can get into
minimal.
Checksums-Sha1:
58810689d3131d9f4c8ed6e5d27d42b41a1dedf3 1755 nplan_0.29~16.04.1.dsc
a7eb0fb9c74e4059af0137cdf9ed703e40bc99e4 71948 nplan_0.29~16.04.1.tar.gz
02e214b621fc728e2eda4f5f59617b5c63fcf5e7 7919
nplan_0.29~16.04.1_source.buildinfo
Checksums-Sha256:
40bf8971f88161d9ab0884d4352a84e7a6daaf2df3d06572b3c8169d7c274315 1755
nplan_0.29~16.04.1.dsc
00238f84cf57a58ec6bba1a5303b14145249c8fe1735831ddd4216764327444d 71948
nplan_0.29~16.04.1.tar.gz
cb780b4fa589637d6a512c3716606acbe2fd7c786e8503de2bac1a54222cb9e1 7919
nplan_0.29~16.04.1_source.buildinfo
Files:
5e4116808664f9c44599e57ce59dfc6d 1755 net important nplan_0.29~16.04.1.dsc
63fb3581011b5b0c52fcebd6c8a32f12 71948 net important nplan_0.29~16.04.1.tar.gz
8796c912cb789f78585cf15ce0496889 7919 net important
nplan_0.29~16.04.1_source.buildinfo
--
Xenial-changes mailing list
Xenial-changes@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/xenial-changes
