linux-hwe (4.10.0-30.34~16.04.1) xenial; urgency=low
* CVE-2017-7533
- dentry name snapshots
linux (4.10.0-29.33) zesty; urgency=low
* linux: 4.10.0-29.33 -proposed tracker (LP: #1704961)
* Opal and POWER9 DD2 (LP: #1702159)
- powerpc/powernv: Tell OPAL about our MMU mode on POWER9
- powerpc/powernv: Fix boot on Power8 bare metal due to
opal_configure_cores()
* CVE-2017-1000364
- mm/mmap.c: do not blow on PROT_NONE MAP_FIXED holes in the stack
- mm/mmap.c: expand_downwards: don't require the gap if !vm_prev
* [Xenial] nvme: Quirks for PM1725 controllers (LP: #1704435)
- nvme: Quirks for PM1725 controllers
* hns: under heavy load, NIC may fail and require reboot (LP: #1704146)
- net: hns: Bugfix for Tx timeout handling in hns driver
* New ACPI identifiers for ThunderX SMMU (LP: #1703437)
- iommu/arm-smmu: Plumb in new ACPI identifiers
* CVE-2017-7482
- rxrpc: Fix several cases where a padded len isn't checked in ticket decode
* CVE-2017-1000365
- fs/exec.c: account for argv/envp pointers
* CVE-2017-10810
- drm/virtio: don't leak bo on drm_gem_object_init failure
* Data corruption with hio driver (LP: #1701316)
- SAUCE: hio: Fix incorrect use of enum req_opf values
* arm64: fix crash reading /proc/kcore (LP: #1702749)
- fs/proc: kcore: use kcore_list type to check for vmalloc/module address
- arm64: mm: select CONFIG_ARCH_PROC_KCORE_TEXT
* cxlflash update request in the Xenial SRU stream (LP: #1702521)
- scsi: cxlflash: Refactor context reset to share reset logic
- scsi: cxlflash: Support SQ Command Mode
- scsi: cxlflash: Cleanup prints
- scsi: cxlflash: Cancel scheduled workers before stopping AFU
- scsi: cxlflash: Enable PCI device ID for future IBM CXL Flash AFU
- scsi: cxlflash: Separate RRQ processing from the RRQ interrupt handler
- scsi: cxlflash: Serialize RRQ access and support offlevel processing
- scsi: cxlflash: Implement IRQ polling for RRQ processing
- scsi: cxlflash: Update sysfs helper routines to pass config structure
- scsi: cxlflash: Support dynamic number of FC ports
- scsi: cxlflash: Remove port configuration assumptions
- scsi: cxlflash: Hide FC internals behind common access routine
- scsi: cxlflash: SISlite updates to support 4 ports
- scsi: cxlflash: Support up to 4 ports
- scsi: cxlflash: Fence EEH during probe
- scsi: cxlflash: Remove unnecessary DMA mapping
- scsi: cxlflash: Fix power-of-two validations
- scsi: cxlflash: Fix warnings/errors
- scsi: cxlflash: Improve asynchronous interrupt processing
- scsi: cxlflash: Support multiple hardware queues
- scsi: cxlflash: Add hardware queues attribute
- scsi: cxlflash: Introduce hardware queue steering
- cxl: Enable PCI device IDs for future IBM CXL adapters
- scsi: cxlflash: Select IRQ_POLL
- scsi: cxlflash: Combine the send queue locks
- scsi: cxlflash: Update cxlflash_afu_sync() to return errno
- scsi: cxlflash: Reset hardware queue context via specified register
- scsi: cxlflash: Schedule asynchronous reset of the host
- scsi: cxlflash: Handle AFU sync failures
- scsi: cxlflash: Track pending scsi commands in each hardware queue
- scsi: cxlflash: Flush pending commands in cleanup path
- scsi: cxlflash: Add scsi command abort handler
- scsi: cxlflash: Create character device to provide host management
interface
- scsi: cxlflash: Separate AFU internal command handling from AFU sync
specifics
- scsi: cxlflash: Introduce host ioctl support
- scsi: cxlflash: Refactor AFU capability checking
- scsi: cxlflash: Support LUN provisioning
- scsi: cxlflash: Support AFU debug
- scsi: cxlflash: Support WS16 unmap
- scsi: cxlflash: Remove zeroing of private command data
- scsi: cxlflash: Update TMF command processing
- scsi: cxlflash: Avoid double free of character device
- scsi: cxlflash: Update send_tmf() parameters
- scsi: cxlflash: Update debug prints in reset handlers
* Ath10k to read different board data file if specify in SMBIOS (LP: #1666742)
- ath10k: search SMBIOS for OEM board file extension
* APST gets enabled against explicit kernel option (LP: #1699004)
- nvme: Display raw APST configuration via DYNAMIC_DEBUG
- nvme: Add nvme_core.force_apst to ignore the NO_APST quirk
- nvme: explicitly disable APST on quirked devices
* Quirk for non-compliant PCI bridge on HiSilicon D05 board (LP: #1698706)
- SAUCE: PCI: Support hibmc VGA cards behind a misbehaving HiSilicon bridge
* New NVLINK2 patches (LP: #1701272)
- powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
- powerpc/npu-dma: Remove spurious WARN_ON when a PCI device has no of_node
* ERAT invalidate on context switch removal (LP: #1700819)
- powerpc: Only do ERAT invalidate on radix context switch on P9 DD1
* powerpc: Invalidate ERAT on powersave wakeup for POWER9 (LP: #1700521)
- powerpc/64s: Invalidate ERAT on powersave wakeup for POWER9
* update ENA driver to 1.2.0k from net-next (LP: #1701575)
- net/ena: use napi_complete_done() return value
- net: ena: remove superfluous check in ena_remove()
- net/ena: switch to pci_alloc_irq_vectors
- net: ena: fix rare uncompleted admin command false alarm
- net: ena: fix bug that might cause hang after consecutive open/close
interface.
- net: ena: add missing return when ena_com_get_io_handlers() fails
- net: ena: fix race condition between submit and completion admin command
- net: ena: add missing unmap bars on device removal
- net: ena: fix theoretical Rx hang on low memory systems
- net: ena: disable admin msix while working in polling mode
- net: ena: bug fix in lost tx packets detection mechanism
- net: ena: update ena driver to version 1.1.7
- net: ena: change return value for unsupported features unsupported return
value
- net: ena: add hardware hints capability to the driver
- net: ena: change sizeof() argument to be the type pointer
- net: ena: add reset reason for each device FLR
- net: ena: add support for out of order rx buffers refill
- net: ena: allow the driver to work with small number of msix vectors
- net: ena: use napi_schedule_irqoff when possible
- net: ena: separate skb allocation to dedicated function
- net: ena: use lower_32_bits()/upper_32_bits() to split dma address
- net: ena: update driver's rx drop statistics
- net: ena: update ena driver to version 1.2.0
linux (4.10.0-28.32) zesty; urgency=low
* linux: 4.10.0-28.32 -proposed tracker (LP: #1701013)
* KILLER1435-S[0489:e0a2] BT cannot search BT 4.0 device (LP: #1699651)
- Bluetooth: btusb: Add support for 0489:e0a2 QCA_ROME device
* aacraid driver may return uninitialized stack data to userspace
(LP: #1700077)
- SAUCE: scsi: aacraid: Don't copy uninitialized stack memory to userspace
* CVE-2017-9605
- drm/vmwgfx: Make sure backup_handle is always valid
* CVE-2017-1000380
- ALSA: timer: Fix race between read and ioctl
- ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
* XDP eBPF programs fail to verify on Zesty ppc64el (LP: #1699627)
- [Config] ppc64el: build for Power8 not Power7
* AACRAID for power9 platform (LP: #1689980)
- scripts/spelling.txt: add "therfore" pattern and fix typo instances
- scsi: aacraid: fix PCI error recovery path
- scsi: aacraid: pci_alloc_consistent() failures on ARM64
- scsi: aacraid: Remove __GFP_DMA for raw srb memory
- scsi: aacraid: Fix DMAR issues with iommu=pt
- scsi: aacraid: Added 32 and 64 queue depth for arc natives
- scsi: aacraid: Set correct Queue Depth for HBA1000 RAW disks
- scsi: aacraid: Remove reset support from check_health
- scsi: aacraid: Change wait time for fib completion
- scsi: aacraid: Log count info of scsi cmds before reset
- scsi: aacraid: Print ctrl status before eh reset
- scsi: aacraid: Using single reset mask for IOP reset
- scsi: aacraid: Rework IOP reset
- scsi: aacraid: Add periodic checks to see IOP reset status
- scsi: aacraid: Rework SOFT reset code
- scsi: aacraid: Rework aac_src_restart
- scsi: aacraid: Use correct function to get ctrl health
- scsi: aacraid: Make sure ioctl returns on controller reset
- scsi: aacraid: Enable ctrl reset for both hba and arc
- scsi: aacraid: Add reset debugging statements
- scsi: aacraid: Remove reference to Series-9
- scsi: aacraid: Update driver version to 50834
* arm64 kernel crashdump support (LP: #1694859)
- memblock: add memblock_clear_nomap()
- memblock: add memblock_cap_memory_range()
- arm64: limit memory regions based on DT property, usable-memory-range
- arm64: kdump: reserve memory for crash dump kernel
- arm64: mm: add set_memory_valid()
- arm64: mm: use phys_addr_t instead of unsigned long in __map_memblock
- arm64: kdump: protect crash dump kernel memory
- arm64: hibernate: preserve kdump image around hibernation
- arm64: kdump: implement machine_crash_shutdown()
- arm64: kdump: add VMCOREINFO's for user-space tools
- [Config] CONFIG_CRASH_DUMP=y on arm64
- arm64: kdump: provide /proc/vmcore file
- Documentation: kdump: describe arm64 port
- Documentation: dt: chosen properties for arm64 kdump
- efi/libstub/arm*: Set default address and size cells values for an empty
dtb
* hibmc driver does not include "pci:" prefix in bus ID (LP: #1698700)
- SAUCE: drm: hibmc: Use set_busid function from drm core
* Processes in "D" state due to zap_pid_ns_processes kernel call with Ubuntu +
Docker (LP: #1698264)
- pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
* Bugfixes for hns network driver (LP: #1696031)
- hns_enet: use cpumask_var_t for on-stack mask
- net: hns: fix uninitialized data use
- net: hns: avoid gcc-7.0.1 warning for uninitialized data
- net: hns: Add ACPI support to check SFP present
- net: hns: Fix the implementation of irq affinity function
- net: hns: Modify GMAC init TX threshold value
- net: hns: Optimize the code for GMAC pad and crc Config
- net: hns: Remove redundant memset during buffer release
- net: hns: bug fix of ethtool show the speed
- net: hns: Optimize hns_nic_common_poll for better performance
- net: hns: Fix to adjust buf_size of ring according to mtu
- net: hns: Replace netif_tx_lock to ring spin lock
- net: hns: Correct HNS RSS key set function
- net: hns: Remove the redundant adding and deleting mac function
- net: hns: Remove redundant mac_get_id()
- net: hns: Remove redundant mac table operations
- net: hns: Clean redundant code from hns_mdio.c file
- net: hns: Optimise the code in hns_mdio_wait_ready()
- net: hns: Simplify the exception sequence in hns_ppe_init()
- net: hns: Adjust the SBM module buffer threshold
- net: hns: Avoid Hip06 chip TX packet line bug
- net: hns: Some checkpatch.pl script & warning fixes
- net: hns: support deferred probe when can not obtain irq
- net: hns: support deferred probe when no mdio
- net: hns: fix ethtool_get_strings overflow in hns driver
* CVE-2017-7346
- drm/vmwgfx: limit the number of mip levels in
vmw_gb_surface_define_ioctl()
* [SRU][Zesty] qcom_emac is unable to get ip address with at803x phy driver.
(LP: #1696143)
- net: qcom/emac: do not use hardware mdio automatic polling
* hisi_sas driver updates (LP: #1695999)
- scsi: hisi_sas: service v2 hw CQ ISR with tasklet
- scsi: hisi_sas: lock sensitive regions when servicing CQ interrupt
- scsi: hisi_sas: lock sensitive region in hisi_sas_slot_abort()
- scsi: hisi_sas: workaround v2 hw SATA IO timeout issue
- scsi: hisi_sas: modify some values of ITCT table
- scsi: hisi_sas: downgrade refclk message
- scsi: hisi_sas: modify hard reset for directed-attached disk
- scsi: hisi_sas: downgrade internal abort exit print
- scsi: hisi_sas: fix probe ordering problem
- scsi: hisi_sas: decrease running_req in hisi_sas_slot_task_free()
- scsi: hisi_sas: add to_hisi_sas_port()
- scsi: hisi_sas: add controller reset
- scsi: hisi_sas: move PHY init to hisi_sas_scan_start()
- scsi: hisi_sas: add softreset function for SATA disk
- scsi: hisi_sas: remove hisi_sas_port_deformed()
- scsi: hisi_sas: error hisi_sas_task_prep() when port down
- scsi: hisi_sas: only reset link for PHY_FUNC_LINK_RESET
- scsi: hisi_sas: modify error handling for v2 hw
- scsi: hisi_sas: modify hisi_sas_abort_task() for SSP
- scsi: hisi_sas: hardreset for SATA disk in LU reset
- scsi: hisi_sas: check for SAS_TASK_STATE_ABORTED in slot complete
- scsi: hisi_sas: free slots after hardreset
- scsi: hisi_sas: fix some sas_task.task_state_lock locking
- scsi: hisi_sas: remove task free'ing for timeouts
- scsi: hisi_sas: process error codes according to their priority
- scsi: hisi_sas: some modifications to v2 hw reg init values
- scsi: hisi_sas: handle PHY UP+DOWN simultaneous irq
- scsi: hisi_sas: rename hisi_sas_link_timeout_{enable, disable}_link
- scsi: hisi_sas: add hisi_sas_clear_nexus_ha()
- scsi: hisi_sas: release SMP slot in lldd_abort_task
- scsi: hisi_sas: check hisi_sas_lu_reset() error message
- scsi: hisi_sas: use dev_is_sata to identify SATA or SAS disk
- scsi: hisi_sas: add is_sata_phy_v2_hw()
- scsi: hisi_sas: add missing break in switch statement
- scsi: hisi_sas: fix SATA dependency
- scsi: hisi_sas: workaround STP link SoC bug
- scsi: hisi_sas: workaround a SoC SATA IO processing bug
- scsi: hisi_sas: workaround SoC about abort timeout bug
- scsi: hisi_sas: add v2 hw internal abort timeout workaround
- scsi: hisi_sas: fix NULL deference when TMF timeouts
- scsi: hisi_sas: controller reset for multi-bits ECC and AXI fatal errors
* [SRU][Zesty] fix soft lockup on overcommited hugepages (LP: #1696165)
- mm/migrate: fix refcount handling when !hugepage_migration_supported()
* HiSilicon D05: installer doesn't appear on VGA (LP: #1698954)
- d-i: Add hibmc-drm to kernel-image udeb
* Fix /proc/cpuinfo revision for POWER9 DD2 (LP: #1698844)
- SAUCE: powerpc: Fix /proc/cpuinfo revision for POWER9 DD2
* CVE-2014-9900
- net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()
* OpenPower: Some multipaths temporarily have only a single path
(LP: #1696445)
- scsi: ses: don't get power status of SES device slot on probe
Date: 2017-08-02 02:01:29.508242+00:00
Changed-By: Thadeu Lima de Souza Cascardo <thadeu.casca...@canonical.com>
Signed-By: Andy Whitcroft <a...@canonical.com>
https://launchpad.net/ubuntu/+source/linux-hwe/4.10.0-30.34~16.04.1
Sorry, changesfile not available.
--
Xenial-changes mailing list
Xenial-changes@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/xenial-changes
